Panasonic AJ-HD3700H Bedienungsanleitung

Digital Video Cassette Recorder

Operating Instructions

(Software)

AJ- E

– 2 –

Contents

Menu screen transitions. . . . . . . . . . . . . . 4

Turning on the power. . . . . . . . . . . . . . . . 7

HOME menu displays . . . . . . . . . . . . . . . 8

HOME menu . . . . . . . . . . . . . . . . . . . . . 13

HOME SET UP menu . . . . . . . . . . . . . . 17

VIDEO IN menu . . . . . . . . . . . . . . . . . . . 22

VIDEO OUT HD menu. . . . . . . . . . . . . . 24

VIDEO OUT HD SET UP menu. . . . . . . 26

VIDEO OUT HD SET UP STATE

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 28

VIDEO OUT SD menu . . . . . . . . . . . . . . 30

VIDEO OUT SD SET UP COMPOSITE

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 32

VIDEO OUT SD SET UP CMPST

STATE menu . . . . . . . . . . . . . . . . . . . 34

VIDEO OUT SD SET UP SDI menu . . . 36

VIDEO OUT SET UP LINE BLK

(video output line blanking) menu. . . . 38

VIDEO OUT SD SET UP SDI STATE

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 40

VIDEO OUT CONVERT menu . . . . . . . 42

VIDEO OUT CONVERT HD_TO_SD

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 43

VIDEO OUT CONVERT SD_TO_HD

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 44

VIDEO OUT CONVERT HD_TO_HD

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 45

AUDIO IN menu . . . . . . . . . . . . . . . . . . . 46

AUDIO IN PCM INPUT SELECT menu. . 48

AUDIO IN CUE INPUT SELECT

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 51

AUDIO IN SET UP menu. . . . . . . . . . . . 53

AUDIO IN CH-MIX SELECT menu . . . . 55

AUDIO OUT menu. . . . . . . . . . . . . . . . . 58

AUDIO OUT MONITOR menu. . . . . . . . 60

AUDIO OUT SET UP menu. . . . . . . . . . 62

AUDIO OUT SET UP STATE menu . . . 66

AUDIO OUT SDI ASIGN menu . . . . . . . 68

TC/CHR menu . . . . . . . . . . . . . . . . . . . . 70

TC/CHR SET UP menu . . . . . . . . . . . . . 76

TC/CHR SET UP VITC.L menu . . . . . . . 78

TC/CHR CONVERT menu. . . . . . . . . . . 80

MULTI CUE menu . . . . . . . . . . . . . . . . . 81

MULTI CUE SET UP menu . . . . . . . . . . 85

INSERT/ASSEMBLE MANUAL EDIT

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 87

INSERT/MANUAL EDIT CH SELECT

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 88

INSERT/ASSEMBLE MANUAL EDIT

SET UP menu. . . . . . . . . . . . . . . . . . . 90

INSERT/ASSEMBLE AUTO EDIT

menu. . . . . . . . . . . . . . . . . . . . . . . . . . 98

INSERT AUTO EDIT CH SELECT

menu. . . . . . . . . . . . . . . . . . . . . . . . . 105

INSERT/ASSEMBLE AUTO EDIT

SET UP menu. . . . . . . . . . . . . . . . . . 107

– 3 –

Contents

SET UP menu . . . . . . . . . . . . . . . . . . . 111

INTERFACE SET UP menu . . . . . . . . 112

PANEL SET UP menu . . . . . . . . . . . . . 118

PANEL SET UP (OP MAP REMOTE)

menu. . . . . . . . . . . . . . . . . . . . . . . . . 120

PANEL SET UP (OP MAP LOCAL)

menu. . . . . . . . . . . . . . . . . . . . . . . . . 123

USER SET UP menu. . . . . . . . . . . . . . 125

SYSTEM SET UP menu . . . . . . . . . . . 130

ENGINEER SET UP menu . . . . . . . . . 136

OPERATION ENGINEER SET UP

menu. . . . . . . . . . . . . . . . . . . . . . . . . 137

TEST menu . . . . . . . . . . . . . . . . . . . . . 138

RF TEST menu . . . . . . . . . . . . . . . . . . 140

RF adjustment value display menu . . . 143

AUDIO TEST menu . . . . . . . . . . . . . . . 144

MECHA TEST menu . . . . . . . . . . . . . . 145

SYSTEM TEST menu . . . . . . . . . . . . . 147

SERVO TEST menu . . . . . . . . . . . . . . 148

TEST FRONT menu . . . . . . . . . . . . . . 151

TEST FRONT PANEL menu . . . . . . . . 152

TEST FRONT KEY CHECK menu . . . 153

Inserting the IC card . . . . . . . . . . . . . . 155

TEST IC CARD menu . . . . . . . . . . . . . 156

TEST IC CARD USER menu. . . . . . . . 157

TEST IC CARD MULTI CUE menu . . . 158

TEST IC CARD MULTI CUE SELECT

menu. . . . . . . . . . . . . . . . . . . . . . . . . 159

TEST IC CARD MULTI CUE MONITOR

menu. . . . . . . . . . . . . . . . . . . . . . . . . 160

TEST IC CARD ERROR LOG

menu. . . . . . . . . . . . . . . . . . . . . . . . . 161

TEST IC CARD ERROR LOG MONITOR

menu. . . . . . . . . . . . . . . . . . . . . . . . . 162

Error messages . . . . . . . . . . . . . . . . . . 163

DIAG menu error messages . . . . . . . . 164

DIAG ACTIVE menu . . . . . . . . . . . . . . 165

DIAG MASKED menu . . . . . . . . . . . . . 166

DIAG LAST menu . . . . . . . . . . . . . . . . 167

DIAG error messages . . . . . . . . . . . . . 168

AUTO OFF error messages. . . . . . . . . 172

SYSTEM error messages . . . . . . . . . . 174

Operation messages . . . . . . . . . . . . . . 176

Operation messages (in AUTO EDIT

mode) . . . . . . . . . . . . . . . . . . . . . . . . 177

Screen saver function . . . . . . . . . . . . . 178

List of menu screen displays . . . . . . . . 179

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . 195

– 4 –

Menu screen transitions

HOME F8 HOME SET UP

AUDIO IN F6

AUDIO IN PCM INPUT

SELECT

AUDIO IN CUE INPUT

SELECT

F8 AUDIO IN SET UP

AUDIO OUT F7

AUDIO OUT MONITOR

VIDEO IN

F10

F9 F10

F11

F12

VIDEO OUT CONVERT

HD_TO_SD

VIDEO OUT CONVERT

SD_TO_HD

VIDEO OUT CONVERT

HD_TO_HD

F11

F12

VIDEO OUT VIDEO OUT HD

VIDEO OUT HD SET UP

TC/CHR F8

TC/CHR SET UP VITC.L

TC/CHR CONVERT

VIDEO OUT SD

VIDEO OUT CONVERT

VIDEO OUT SD SETUP

CMPST

VIDEO OUT SD SETUP

SDI

LINE BLK

STATE

F12

AUDIO OUT SET UP

F12

AUDIO OUT SET UP

STATE

AUDIO OUT SDI ASIGN

F9 AUDIO IN CH-MIX

SELECT

–5 –

Menu screen transitions

MULTI CUE F8 MULTI CUE SET UP

ASSEMBLE ASSEMBLE MANUAL

EDIT F8 ASSEMBLE MANUAL

EDIT SET UP

F12

F10

F11 F11

F13

F12

HOME SET UP

INSERT/ASSEMBLE

MANUAL EDIT SET UP

INSERT/ASSEMBLE

AUTO EDIT SET UP

SYSTEM SET UP

TC/CHR SET UP

AUDIO IN SET UP

AUDIO OUT SET UP

INTERFACE SET UP

PANEL SET UP

USER SET UP

F13 ENGINEER OPERATION

ASSEMBLE AUTO EDIT

SET UP

F13

INSERT INSERT MANUAL

EDIT

INSERT MANUAL

EDIT SET UP

INSERT MANUAL

EDIT CH SELECT

INSERT AUTO EDIT INSERT AUTO EDIT

SET UP

INSERT AUTO EDIT

CH SELECT

SET UP

OP MAP LOCAL

OP MAP REMOTE

–6 –

Menu screen transitions

TEST F2 RF

DIAG F2 DIAG MASKED

F3 DIAG LAST

F3 AUDIO

F4 MECHA

F5 SYSTEM

F6 FRONT

SERVO

F13 IC CARD F1 USER

MULTI CUE

ERROR LOG

TEST FRONT PANEL

TEST FRONT KEY

CHECK IO

SELECT

MONITOR

F2 F3

–7 –

Turning on the power

Turn on the power.

The HOME menu is displayed.

This VTR comes already programmed with menus that correspond to specific operating objectives, and the

operations performed on each differ from one menu to another. When a menu is selected using a menu se-

lection button, what appears on the display changes, and the function keys (F1 to F13) also implement the

function corresponding to the respective menu items.

SET UP menus are provided in order for the user to have settings on hand for the seldom used functions, etc.

among the various menu items.

The HOME menu is provided as the VTR’s basic menu. It automatically appears on the display when the

power has been turned on. (However, the IC CARD menu will automatically appear if an IC card has been in-

serted.)

F13

F12

F11

F10

F8F7F6F5F4F3F2F1

–8 –

HOME menu displays

∑Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on the

format used.)

Use this to adjust the level of the input audio signals on the AUDIO

IN menu. Alternatively, it is used to adjust the level of the audio

playback output signals on the AUDIO OUT menu.

Press the L/R buttons to select the audio channel whose signals

are to be output from the AUDIO MONITOR L/R connectors and

HEADPHONES jack.

These display the type of input signals of each channel.

The F1 (CH-1) to F6 (DIGITAL) [or F1 (CH-1) to F13 (CH-8) for 8

channels] on the AUDIO IN PCM INPUT SELECT menu are se-

lected using the F9 (CH-MIX) key on the AUDIO IN CUE INPUT

SELECT menu.

[---- ANA: Signals from the ANALOG INPUT connectors.

CH1 AES:

Signals from the DIGITAL AUDIO INPUT connectors.

CH1 SER: Signals from the serial V/A input connectors.

{---- INT: Signals from the internal signal generator.

[---- LINE: Signals from the CUE IN connector.

CUE MIX: CH1 to CH8 signals selected by CUE MIX setting.

{---- AUTO: This is always used for digital channel backup pur-

poses.

∑Display lamps

SYSTEM: This indicates the video system format which was set

on the SETUP/SYSTEM menu.

1080_59i

525_59i

1080_23psf

1080_24psf

720_59p

1080_50i

TAPE: This indicates the format of the playback tape.

“¢¢¢¢¢¢¢¢”appears in the EJECT mode.

If a section is unrecorded or if the format of a section

cannot be identified, the lamp blinks while the display

of the format identified up to the section concerned is

retained.

1080_59i, 1080_60i

1035_59i, 1035_60i

525_59i

1080_23p, 1080_24p

720_59p, 720_60p

1080_50i

How to display the ≥AUDIO IN menu: ≥AUDIO IN PCM INPUT SELECT menu:

menus: #

≥AUDIO OUT menu: ≥AUDIO IN CUE INPUT SELECT menu:

# F7

AUDIO OUTAUDIO OUT

F6AUDIO INAUDIO IN

–9 –

HOME menu displays

REF: This indicates the status of the output reference signal

which has been selected by the VTR.

HD REF59: HD REF with a field frequency of 59.94 Hz is

selected.

HD REF47: HD REF with a field frequency of 47.96 Hz is

selected.

HD REF48: HD REF with a field frequency of 48.00 Hz is

selected.

HD REF50: HD REF with a field frequency of 50.00 Hz is

selected.

SD REF59: The NTSC signal is selected as the SD REF

signal.

SD REF50: The PAL signal is selected as the SD REF sig-

nal.

HD IN59: The HD serial input with a frame frequency of

29.97 Hz is selected as the REF signal.

HD IN47: The HD serial input with a frame frequency of

23.98 Hz is selected as the REF signal.

HD IN48: The HD serial input with a frame frequency of

24.00 Hz is selected as the REF signal.

HD IN50: The HD serial input with a frame frequency of

25.00 Hz is selected.

SD IN: The SD serial input is selected as the REF sig-

nal. (SD IN can be selected only when 525i has

been selected as the VTR’s system format.)

HD FREE: The HD internal signal generator is used since

no REF signal has been selected using the

OUT REF setting.

SD FREE: The SD internal signal generator is used since

no REF signal has been selected using the

OUT REF setting.

*DUAL: HD REF47 and SD REF59 have been selected

simultaneously.

This setting takes effect when 1080/23psf has

been selected as the VTR’s system format,

AUTO has been selected by the OUT REF set-

ting, and two of the above REF signals have

been input.

°This VTR uses the HD REF and SD REF sig-

nals as a reference for entering the 24 #60

conversion inside the unit.

–10 –

HOME menu displays

∑Setting mode display area

The displays appearing in this area indicate the modes which

have been set.

CUT: Appears when the audio cut editing mode is set.

XFADE: Appears when the audio cross-fade editing mode

is set.

VFADE: Appears when the audio V fade editing mode is

set.

INTRP: Appears when the time code interpolation mode (in

which the time code cannot be read out accurate-

ly) is established.

DF: Appears when the drop frame mode is set.

F1/F2: Indicates the field numbers for VITC.

EMPHASIS: Appears when pre-emphasis is applied to the

audio signals.

TRACK VAR: Appears when an adjustment has been made with

the tracking deviated from the fixed position.

TRACK OPT: Appears when an optimizing adjustment has been

made for the tracking.

∑Remaining tape time

This indicates the remaining tape time as the tape travels.

∑User file display

This indicates the number of file which is called when the power is

switched on or the currently called user file. If there is a discrep-

ancy between the contents of the user file displays and even one

current setting, “¢”will appear in front of the file number.

∑Time code displays

These indicate the time code values.

CTL1: Normal control signal

CTL2: Control signal (which cannot be reset)

LTCR: LTC readout

LUBR: LTC user bit readout

VTCR: VITC readout

VUBR: VITC user bit readout

TCG: Value generated by generator

LUBG: Value of LTC user bit generated

VUBG: Value of VITC user bit generated

E-TC: External time code

E-UB: External user bit

∑Checking the value generated by generator

Press the INPUT CHECK key. While the key is held down, the

value generated by the generator is displayed.

INPUT CHECK

TCG

00 : 41 : 07 : 04

Andere Handbücher für AJ-HD3700H

Inhaltsverzeichnis

Andere Panasonic Videorecorder-System Handbücher

Panasonic

Panasonic HD1700pe Bedienungsanleitung

Panasonic

Panasonic AG-TL750 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-4663 Bedienungsanleitung

Panasonic

Panasonic Omnivision VHS PV-4564 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-4669 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-9661 Bedienungsanleitung

Panasonic

Panasonic NV-SV121 Series Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-V4540 Bedienungsanleitung

Panasonic

Panasonic NV-HD650 Series Bedienungsanleitung

Panasonic

Panasonic AJD220P - DVC PRO Bedienungsanleitung

Panasonic

Panasonic ProLine AG-2570 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-9451 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-7662 Bedienungsanleitung

Panasonic

Panasonic NV-HS1000 Bedienungsanleitung

Panasonic

Panasonic NV-SD10 Series Bedienungsanleitung

Panasonic

Panasonic AJ-YA120AG Bedienungsanleitung

Panasonic

Panasonic NV-HV61EB Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-V4660 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-8661 Bedienungsanleitung

Panasonic

Panasonic AGRT850 - TIME LAPSE VTR Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-8400 Bedienungsanleitung

Panasonic

Panasonic NV-L25 Series Bedienungsanleitung

Panasonic

Panasonic NV-HS820 Series Bedienungsanleitung

Panasonic

Panasonic AJHD1800 - VTR DVCPRO HD Bedienungsanleitung

Beliebte Videorecorder-System Handbücher anderer Marken

Toshiba

Toshiba M-662 Bedienungsanleitung

Sony

Sony GV-500 Primary Bedienungsanleitung

JVC

JVC HR-J282EU Bedienungsanleitung

Sony

Sony HDCAM-SR SRW5800 Bedienungsanleitung

Magnavox

Magnavox VRU242AT Bedienungsanleitung

Sony

Sony HVR-M10C Bedienungsanleitung

RCA

RCA VR634HF - Hi-Fi VCR Bedienungsanleitung

JVC

JVC HR-5910U Bedienungsanleitung

JVC

JVC HR-S8600EU Bedienungsanleitung

JVC

JVC HR-FS1U Bedienungsanleitung

Sharp

Sharp VC-H9888U Bedienungsanleitung

FUNAI

FUNAI LC-950 Bedienungsanleitung

Sharp

Sharp VC-S2000GM Bedienungsanleitung

Sony

Sony Video8 EV-A60 Bedienungsanleitung

Aiwa

Aiwa HV-E212 Bedienungsanleitung

JVC

JVC HR-J3006UM Bedienungsanleitung

GE VG4271 Bedienungsanleitung

RCA

RCA VR678HF Bedienungsanleitung