Panasonic NV-SJ30AM Bedienungsanleitung

Video Cassette Recorder Line Recording

Model No.

NV-SJ30AM

Operating Instructions

Contents

Precautions 3

Connections 4

Menu Setting 4

Playback 6

Play-Off Timer 8

Recording and Editing 9

Other Functions 12

Before Requesting Service 14

Specifications 15

Before attempting to connect, operate or adjust

this product, please read these instructions

completely.

VQT9782

RR3‑MAMfm.book1ページ２００２年６月６日木曜日午後６時２１分

As this equipment gets hot during use,

operate it in a well ventilated place; do

not install this equipment in a confined

space such as a book case or similar

unit.

WARNING:

To reduce the risk of fire, electric shock

or product damage, do not expose this

equipment to rain, moisture, dripping or

splashing and ensure that no objects

filled with liquids, such as vases, shall be

placed on the equipment.

IMPORTANT

Your attention is drawn to the fact that

recording of pre-recorded tapes or discs or

other published or broadcast material may

infringe copyright laws.

On Colour system

This unit is designed to play back programmes

based on the PAL (B/G and D/K) and SECAM (B/

G and D/K) colour systems.

• Tapes recorded with the French SECAM colour

system can be played back on this unit but the

picture displayed will be black and white.

FOR YOUR SAFETY

DO NOT REMOVE OUTER COVER.

To prevent electric shock, do not remove cover.

No user serviceable parts inside. Refer servicing

to qualified service personnel.

Longrun Head System

This longrun head system enables approximately

8,000 hours of recording/playback with high

quality images. Newly developed head cylinder

with narrower head windows and tapered

cylinder design effectively protects heads from

dust and prevents head cloging. Plus, “Alumina”

Head Cleaner further enhanced cleaning

efficiency.

• Based on in-house tests with Panasonic video

cassettes. Actual head life may vary according

to conditions of use, tape type, temperature,

humidity, etc.

Infrared Remote Control

Power Source for the Remote Control

The remote control is powered by 2 UM3 or R6

size batteries. The life of the batteries is about

one year, although this depends on the

frequency of use.

Precautions for Battery Replacement

• Load the new batteries with their polarity (+

and -) aligned correctly.

• Do not apply heat to the batteries, or an internal

short-circuit may occur.

• If you do not intend to use the remote control

for a long period of time, remove the batteries

and store them in a cool and dry place.

• Remove spent batteries immediately and

dispose of them.

• Do not use an old and a new battery together,

and never use an alkaline battery with a

manganese battery.

• Do not use rechargeable batteries.

Opening the cover

1While pressing the

indentation Ain the

direction indicated by

the arrow...

2Lift the cover up.

Loading the batteries

RR3‑MAMfm.book2ページ２００２年６月６日木曜日午後６時２１分

Precautions

Please read these precautions before you

operate this VCR (Line Recording).

Avoid:

• Humidity and dust.

• Extreme heat such as direct sunlight.

• Magnets or electromagnetic objects.

• Touching internal parts of the VCR (Line

Recording).

• Water or some other liquid.

• Lightning. Disconnect the aerial plug from the

VCR (Line Recording) during lightning storms.

• Anything heavy on the VCR (Line Recording).

• Connecting or handling the equipment with wet

hands.

• Using a cell phone near the VCR (Line

Recording) because doing so may cause noise

to adversely affect the picture and sound.

Do:

• Wipe the VCR (Line Recording) with a clean

and dry cloth.

• Install the VCR (Line Recording) in a horizontal

position.

• Keep the VCR (Line Recording), TV and other

equipment switched off until you have finished

all connections.

Condensation may form in the following

cases:

• The VCR (Line Recording) is brought from cold

surroundings into a well-heated room.

• The VCR (Line Recording) is suddenly brought

from cool surroundings, such as an

air-conditioned room or car, to a place which is

hot and humid.

Note:

• In any of the above-mentioned conditions, do

not operate the VCR (Line Recording) for at

least 1 hour. This VCR (Line Recording) is not

equipped with a dew sensor.

Dirt on the Video Heads

If the video heads get dirty, pictures will not be

recorded or played back clearly.

(See the following conditions.)

Normal picture

Small amount

of dirt

Large amount

of dirt

If this happens, clean the video heads with a

commercially available cleaning cassette.

If the problem still persists after performing the

above, contact qualified service personnel to

request assistance.

RR3‑MAMfm.book3ページ２００２年６月６日木曜日午後６時２１分

Connections

Connection to a TV using the

Audio/Video Input Socket

(1) TV Set (Not Supplied)

(2) VIDEO IN

(3) AUDIO IN

(4) AV Cable (Not Supplied)

POWER Í/I Button

Press to switch the VCR (Line Recording) from

on to the standby mode or vice versa. In the

standby mode, the VCR (Line Recording) is still

connected to the mains. When the VCR (Line

Recording) is turned off, the [STANDBY]

indicator (on the front panel) is lit. When the VCR

(Line Recording) is turned on, the [120] indicator

(on the front panel) is lit.

Menu Setting

LANGUAGE

1Press [MENU].

2Select [LANGUAGE].

3Select one of the two

languages displayed:

English and Arabic.

4Press [MENU] to make the on screen display

disappear.

TAPE SELECT

Select the corresponding video cassette tape

length to display the approximate remaining tape

time.

1Press [MENU].

2Select [TAPE SELECT].

3Select the corresponding video cassette tape

length.

[AUTO]:

The VCR automatically distinguishes E30, -60,

-90, -120, -150, -180, and -240 tapes.

[E195]:

For E195 tape

[E260]:

For E260 tape

[E300]:

For E300 tape

• The remaining tape time may not be

displayed correctly depending on the tape

used.

4Press [MENU] to make the on screen display

disappear.

OUT

AUDIO

VIDEO

(1)

(2)

(3)

(4)

POWER PICTURE

REW

INDEX

STOP

OSD

PLAY

RESET

TRACKING/V-LOCK

SPEED

JET REW

DISPLAY

1,4

END :MENU

LANGUAGE

[¡ENGLISH ]

TAPE SELECT [AUTO]

SYSTEM [AUTO]

NTSC PB SELECT [onPALTV]

SELECT:

dF«WO

RR3‑MAMfm.book4ページ２００２年６月６日木曜日午後６時２１分

SYSTEM

1Press [MENU].

2Select [SYSTEM].

3Select [AUTO], [PAL], [MESECAM] or [B/W].

[AUTO]:

Allows PAL, MESECAM or NTSC signals to be

distinguished automatically.

Normally set at this position. If the picture

lacks colour when [AUTO] is set, set to [PAL],

[MESECAM].

[PAL]:

Use when recording or playback in the PAL

system.

[MESECAM]:

Use when recording or playback in the

MESECAM system.

[B/W]:

Use when recording or playback in the black

and white.

4Press [MENU] to make the on screen display

disappear.

NTSC PB SELECT

1Press [MENU].

2Select [NTSC PB SELECT].

3Select [on PAL TV] or [4.43].

[on PAL TV]:

Use when playing back a tape recorded in the

NTSC system on PAL TV.

[4.43]:

Use when playing back a tape recorded in the

NTSC system in 4.43 mode.

4Press [MENU] to make the on screen display

disappear.

RR3‑MAMfm.book5ページ２００２年６月６日木曜日午後６時２１分

Playback

¢No Function

Preparation

Insert a recorded video cassette tape.

Operations

1Start viewing the picture by

pressing [PLAY].

•When playing back a tape

which was recorded in the

LP or NTSC EP mode, the

[LP (EP)] indicator is lit.

•When playing back a tape which was

recorded in the PAL EP mode, the [LP (EP)]

indicator flashes.

2Search forward by tapping

[FF]. (Cue Playback)

•To change back to normal

playback, press [PLAY].

3Search backward by tapping

[REW]. (Review Playback)

•To change back to normal

playback, press [PLAY].

4View a still picture by

pressing [PAUSE/SLOW].

(The picture may not be in

colour.)

•To view a slow motion

picture, keep [PAUSE/

SLOW] pressed for 2

seconds.

The indicator rotates

slowly.

•To continue normal playback, press [PLAY].

5Stop viewing the picture by pressing [STOP].

Hints:

•To fast forward the tape: Press [FF].

•To rewind the tape: Press [REW].

•If you keep [FF] or [REW] pressed in step 2 or

3, Cue or Review Playback is activated while

the button is pressed, and operation returns to

normal playback when the button is released.

For High Speed Cue or Review

Playback (JET SEARCH)

During playback, tap [FF] or [REW] twice.

To Obtain a Higher Speed

Rewind (Jet Rewind)

Press [JET REW].

The [J : REW] indication appears on the TV

screen. (If [OSD] is not pressed, [J : REW] is not

displayed on TV screen. See page 13.)

•Depending on a cassette or an operating

condition, the rewind speed may change

somewhat.

•The tape counter is reset to [0:00.00] when the

tape is rewound to the beginning.

POWER Í/ I

JET REW

PICTURE MODE

REC/OTR

6/65/5

STOP PLAY

EJECT

TAPE REFRESH

OFF

240

180

120

REC/

STANDBY LP(EP)

3125

POWER PICTURE

REW

INDEX

STOP

REC

OSD

PLAY

RESET

TRACKING/V-LOCK

SPEED

AUDIO OUT

JET REW

DISPLAY

120

240

180

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

RR3‑MAMfm.book6ページ２００２年６月６日木曜日午後６時２１分

To Eject the Video Cassette

Using the Remote Control

Keep pressing [STOP] for at least 3 seconds.

To Play back the Recorded

Section Repeatedly

Keep [PLAY] on the remote

control pressed for 5 seconds or

more.

The [R 1] display appears on the

TV screen. (If [OSD] is not

pressed, [R 1] is not displayed on TV screen.

See page 13.)

•Press [STOP] to release the Repeat Playback

mode.

NTSC Playback on PAL TV

Tapes recorded in the NTSC system can be

played back with this VCR (Line Recording) via a

PAL system TV set.

•Set [NTSC PB SELECT] to [on PAL TV]. (See

page 5.)

Automatic Functions

Automatic switching on

When a video cassette tape is inserted, the VCR

(Line Recording) turns itself on automatically.

Automatic playback

When a video cassette tape without an intact

erasure prevention tab is inserted, the VCR (Line

Recording) starts playback automatically.

Automatic rewinding

When the tape reaches its end during recording

or playback, it will automatically be rewound to

the beginning. During OTR or Fast Forwarding,

this function will not work.

VCR (Line Recording)-off playback

When the VCR (Line Recording) is off, an

inserted video cassette tape can be played back

by pressing [PLAY].

Automatic switching off and ejection

When the VCR (Line Recording) is switched off,

an inserted video cassette tape can be ejected

simply by pressing [EJECT]. The VCR (Line

Recording) will eject the video cassette tape and

automatically turn itself off again.

Notes:

•During any playback mode other than normal

playback, the picture may have some noise

bars, the colour may be unstable, or a black

and white picture may appear. However, this is

not a malfunction.

•Depending on the TV set used, the playback

picture may roll up or down during special

playback (Cue, Review, Still or Slow Playback

mode). However, this is not a malfunction.

•Cue or Review Playback will be automatically

released after 10 minutes, Still Playback after 5

minutes and Slow Playback after 10 minutes.

•In the LP or EP mode, when playing back a

tape which was recorded on another VCR (Line

Recording), it may be necessary to adjust the

Tracking Control. In some cases the picture

quality may still be inferior.

•When you play back a tape recorded in the LP

or EP mode, the picture may be in black and

white. However, this is not a malfunction.

•When you play back a tape recorded in the EP

mode, the picture and the sound may be

unstable. However, this is not a malfunction.

120

240

180

REC/

STANDBY LP(EP)

RR3‑MAMfm.book7ページ２００２年６月６日木曜日午後６時２１分

Tracking/V-Lock

For manual tracking adjustment

The iand jbuttons on the remote control are

used to adjust the tracking when, for example,

noise bars on the picture during normal playback

are better removed manually than by automatic

digital tracking control.

Press both buttons down at the same time to

return to automatic digital tracking control.

For slow tracking adjustment

When noise bars appear during Still or Slow

Playback, switch over to slow playback and

adjust with the ior jbutton to reduce the noise

bars.

For vertical locking adjustment

Use the iand jbuttons to minimize any vertical

jitter during still picture playback.

To Playback in the Desired

Picture Quality (Picture Mode)

This function reproduces optimum playback

picture from various kind of recorded tapes and

contents.

Press [PICTURE] and select the corresponding

Picture Mode as follows.

Example:

[STANDARD]:

The normal picture. For the TV programme

recorded.

[DYNAMIC]:

The clear and vivid picture. For the scenery or

sports.

[SOFT]:

The mild picture. For the rental soft tape.

[CARTOON]:

The delicate picture. For the cartoon.

•Pressing [PICTURE] once makes the on

screen display appear; after that, pressing it

repeatedly changes the indication in the

following order:

Play-Off Timer

Whenever you are playing back a tape and

wish to stop the tape automatically, simply

set the playback duration up to 240 minutes

using [PLAY/OFF].

Preparation

Insert a recorded cassette.

Operations

1During playback, press [PLAY/OFF] on the

main unit for more than 2 seconds to put the

main unit in the Play-Off Timer mode.

2Press [PLAY/OFF] on the main unit repeatedly

to select the desired playback duration.

•At the press of the button,

indicators of selected timer

duration flash.

•At every press of the button,

flashing indicators change as

follows:

30 (min.)

60 (min.)

120 (min.)

180 (min.)

240 (min.)

No flash (normal

playback mode)

•The VCR (Line Recording) will automatically

switch off when Play-Off Timer is completed.

To turn the VCR (Line Recording) on again,

press [POWER].

Notes:

•If the tape reaches the end during Play-Off

Timer, the VCR (Line Recording) will

automatically be rewound to the beginning and

turn itself off.

•To stop Play-Off Timer part-way, press [STOP]

or [POWER].

DYNAMIC

CARTOON SOFT

STANDARD

(Initial Setting)

1,2

POWER Í/ I

JET REW

PICTURE MODE

REC/OTR

6/65/5

STOP PLAYEJECT

TAPE REFRESH

OFF

240

180

120

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

RR3‑MAMfm.book8ページ２００２年６月６日木曜日午後６時２１分

Recording and

Editing

(1) VIDEO/AUDIO IN

(2) Other VCR or Video Movie Camera

Recording

Preparations

•Connect a movie camera or another VCR to

this VCR (Line Recording) as shown.

•Insert a video cassette tape with an intact

erasure prevention tab.

•Set [SYSTEM]. (See page 5.)

Operations

1Start recording by pressing

[REC].

2Stop recording by pressing [STOP].

To Interrupt Recording

Press [PAUSE/SLOW] during

recording.

Press it again to continue

recording.

To Select the Desired Tape

Speed

Press [SPEED] before recording.

Repeatedly pressing this button changes the

tape speed in the following order.

PAL: SP

NTSC: SP

EP mode means Super Long Play (SLP).

•When LP or NTSC EP mode is selected, the

[LP (EP)] indicator is lit.

•When PAL EP mode is

selected, the [LP (EP)] indicator

flashes.

Notes:

•The Recording Pause mode will be

automatically released after 5 minutes.

•It is not possible to record via the RF input

Socket because this VCR (Line Recording) is

not equipped with a TV tuner.

•When playing back a cassette recorded in the

LP or EP mode, some picture and sound

distortion may occur. However, this is not a

malfunction.

•The tape recorded in the EP mode on this VCR

(Line Recording) cannot be played back on the

other VCR without EP mode function.

OUT

AUDIO

VIDEO

(2)

(1)

POWER Í/ I

JET REW

PICTURE MODE

REC/OTR

6/65/5

STOP PLAYEJECT

TAPE REFRESH

OFF

240

180

120

REC/

STANDBY LP(EP)

POWER PICTURE

REW

INDEX

STOP

REC

OSD

PLAY

RESET

TRACKING/V-LOCK

SPEED

AUDIO OUT

JET REW

DISPLAY

120

240

180

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

120

240

180

REC/

STANDBY LP(EP)

RR3‑MAMfm.book9ページ２００２年６月６日木曜日午後６時２１分

(1) VIDEO OUT

(2) AUDIO OUT

Editing

Various contents from other sources can be

recorded as a series into a single tape.

Preparations

•Connect a movie camera or another VCR to

this VCR (Line Recording) as shown on page 9.

•Insert a video cassette tape with an intact

erasure prevention tab.

•Set [SYSTEM]. (See page 5.)

Operations

1Search for the end of the previous recording.

2Press [PAUSE/SLOW] at the end.

3Set the new recording by pressing [REC].

4Start the new recording by pressing [PAUSE/

SLOW] again.

5Stop recording by pressing [STOP].

To Record a TV Programme

TV programmes can be recorded by connecting

this VCR (Line Recording) to a TV with Audio/

Video output sockets.

Preparation

Connect this VCR (Line Recording) and a TV as

shown.

Operations

1Turn on the TV and VCR (Line Recording).

2Insert a video cassette tape with an intact

erasure prevention tab.

3Select TV station which you want to record.

4Start recording by pressing [REC].

5Stop recording by pressing [STOP].

POWER PICTURE

REW

INDEX

STOP

REC

OSD

PLAY

RESET

TRACKING/V-LOCK

SPEED

AUDIO OUT

JET REW

DISPLAY

2,4

OUT

AUDIO

VIDEO

(1) (2)

RR3‑MAMfm.book10ページ２００２年６月６日木曜日午後６時２１分

Andere Handbücher für NV-SJ30AM

Inhaltsverzeichnis

Andere Panasonic Videorecorder-System Handbücher

Panasonic

Panasonic Omnivision PV-V4601 Bedienungsanleitung

Panasonic

Panasonic AG6540P - TIME LAPSE RECORDER Bedienungsanleitung

Panasonic

Panasonic NV-HS930 Series Bedienungsanleitung

Panasonic

Panasonic AJHD2700P - D5 HD VTR Bedienungsanleitung

Panasonic

Panasonic NV-HD650 Series Bedienungsanleitung

Panasonic

Panasonic AG5700P - SVHS Bedienungsanleitung

Panasonic

Panasonic ProLine AG-1350 Bedienungsanleitung

Panasonic

Panasonic AGTL950 - TIME LAPSE VCR Bedienungsanleitung

Panasonic

Panasonic AG-1980 Bedienungsanleitung

Panasonic

Panasonic Omnivision VHS PV-V4022 Bedienungsanleitung

Panasonic

Panasonic NV-FJ623EC Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-HD1000 Bedienungsanleitung

Panasonic

Panasonic AJHD1200AP - DVCPRO HD VTR Bedienungsanleitung

Panasonic

Panasonic NV-DV2000EC Bedienungsanleitung

Panasonic

Panasonic NV-MV21 Series Bedienungsanleitung

Panasonic

Panasonic NV-FJ8MK2AM Bedienungsanleitung

Panasonic

Panasonic AGRT600AP - TIME LAPSE RECORDER Bedienungsanleitung

Panasonic

Panasonic Quasar W-1301 Bedienungsanleitung

Panasonic

Panasonic AG-DTL1 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-9661 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-7661 Bedienungsanleitung

Panasonic

Panasonic AGDTL1P - TIME LAPSE RECORDER Bedienungsanleitung

Panasonic

Panasonic NV-SD430 Series Bedienungsanleitung

Panasonic

Panasonic NV-SD450EU Bedienungsanleitung

Beliebte Videorecorder-System Handbücher anderer Marken

Toshiba

Toshiba M-662 Bedienungsanleitung

Sony

Sony GV-500 Primary Bedienungsanleitung

JVC

JVC HR-J282EU Bedienungsanleitung

RCA

RCA VR678HF Bedienungsanleitung

Sylvania

Sylvania SRV196 Bedienungsanleitung

Akai

Akai VS-606EA Bedienungsanleitung

Fisher

Fisher FVH-8300 Bedienungsanleitung

Zenith

Zenith VRL4270HF Bedienungs- und Wartungshandbuch

GE VG2050 Bedienungsanleitung

Sanyo

Sanyo TLS-9072 Bedienungsanleitung

Philips

Philips VR969/05 Bedienungsanleitung

Memorex

Memorex MVR4041 Bedienungsanleitung

Arm Electronics

Arm Electronics VCR800 Bedienungsanleitung

Sony

Sony SLV-ED115PS Bedienungsanleitung

Sanyo

Sanyo VHR-230 series Bedienungsanleitung

Philips

Philips VR 312 Bedienungsanleitung

JVC

JVC HR-J693U Bedienungsanleitung

JVC

JVC HR-J692US Bedienungsanleitung