Panasonic NA-126MB1WSA Bedienungsanleitung
Service Manual
Front Load Washing Machine
NA-126MB1WSA NA-126MB1LSA
NA-475MB1WSA NA-475MB1LSA
NA-126MB1WAS NA-126MB1LAS
NA-127MB1WAS NA-127MB1LAS
NA-148MB1WAS NA-148MB1LAS
NA-127MB1LZA NA-148MB1LZA
Model No.
Product Color : White/Silver
Destination : India
KSA
UAE
Oman
South Africa
Kuwait
12 EXPLODED VIEW AND PART LIST ................... 44
1 Precaution
3
When performing troubleshooting and part replacement during servicing, note the
following safety
precautions:
1.1 Safety Precautions
1.1.1 Use Genuine Parts
The components of the washing machine have safety features such as non-combustibility
and voltage with standing. Therefore, always use the same part as suggested by the maker.
In particular be sure
to use only designated parts in case of major safety parts identified by the marker.
1.1.2 Grounding
Connect the grounding wire to the shell plate ,and bury it under at least 25cm of earth:
alternatively, connect the ground wire to the appropriate pin on a properly grounded
power receptacle. Never connect the wire to a telephone line, lightning rod, or gas pipe.
1.2 Servicing Precautions
1.2.1Observe Warnings
Be sure to follow special warning and precautions that are described on part labels and in
the owner'
manual.
1.2.2 Parts Assembly and Wiring
Be sure to use insulation material(such as tube and tape).And be sure to restore all parts
and wires to their original position. Take special care to avoid contact with sharp edges.
1.2.3 Perform Safety Checks after Servicing
After servicing, check to see that the screws, parts, and wiring are restored to their
original positions, and check the insulation between the external metals and the socket
plug. In addition, place the washing machine in a level position (less than1 degree)to
prevent vibration and noise during operations.
1.2.4 Insulation Checks
Pull out the plug from the power receptacle, pour water into the spin tub, and then set
the timer.
Check to see that the resistance insulation between the terminals of the plug and the
externally
exposed metal is greater than 1M .
Note :When it is impossible to insulation check with a 500V insulation resistance
tester, use other testers for inspection.
1.3 CAUTIONS FOR SAFETY
•Please observe the following notes for safety.
•The symbols indicate as follows.
4
Symbol Meaning
WARNING
Indicates possibility of death or serious injury of a repair
technician and a person nearby through the misconducted
work , or of a user by a defect of the product after the work
performed by the technician.
CAUTION
Indicates possibility of injury or physical damages* of a
repair technician and a person nearby through the
misconducted work , or of a user by a defect of the product
after the work performed by the technician.
Symbol
Meaning
ELECTRIC SHOCK
Indicates a caution (including a warning).
Specific instruction is followed by a graphic or characters in
or near.
Symbol left warns an electric shock.
DO NOT DISASSEMBLE
Indicates prohibition (act must not be conducted).
Specific instruction is followed by a graphic or characters in
or near.
DO NOT Symbol left warns not to disassemble.
UNPLUG
Indicates forcing (act must be conducted).
Specific instruction is followed by a graphic or characters in
or near .
Symbol left warns to unplug the power cord.
* Means secondary damages of property, furniture , domestic animal and pet.
Symbol
Meaning
OUT OF CHILD
Advise the customer to keep children out of the work place.
Children may be injured with a tool or a disassembled part.
UNPLUG POWER
Unplug power cord for the work such as disassembling
which is not
unnecessary to power on . Do not hold the plug by a wet hand.
Failing to unplug may cause an electric shock.
USE REPAIR PARTS
Use the specified repair parts when repairing the product.
Otherwise , amalfunction or a defect may occur.
Also , a short circuit , ignition or other danger to the
customer may occur.
1 PRECAUTION
5
WARNING
CHECK INSULATION
RESISTANCE
After repair, measure insulation resistance between the
charging part(power cord plug) and the non-charging
metallic part (ground) with an insulation resistance meter
(500V).The resistance shall be 10M or more.
Failing to check the insulation resistance may cause a short
circuit, electric shock or other diseases to the customer.
DO NOT MODIF
Do not modify the product.
An electric shock or ignition may occur.
DO NOT MODIFY
Only a repair technician can disassemble and repair.
An electric shock, ignition or malfunction may cause injury.
USE EXCLUSIVE
SOCKET
Use an exclusive 110 VAC/15 A socket for the washing
machine.
Use an exclusive 220VAC/17A socket for the washing
machine.
Otherwise , an electric shock or ignition may cause. Sharing
the same socket with other instrument causes heating of a
branch socket and result in a fire.
CONNECT
GROUNDING WIRE
Connect the grounding wire.
Failing to do so may cause an electric shock when a short
circuit occurs.
Consult an electric work shop or a sales shop.
DO NOT USE WET
PLACE
Do not install in a bath room or a place exposed to wind or
rain.
An electric shock or a short circuit may cause a fire.
DO NOT SPLASH
WATER
Do not pour or immerse electrical parts into water or liquid
solution.
An electric shock or ignition may occur.
REMOVE DUST
Wipe off dust adhered to the plug of power cord.
Dust may cause a fire.
AVOID
INFLAMMABLE
Do not put inflammable into the washing tub.
Do not put cloths stained with kerosene, gasoline, benzene,
thinner, alcohol, etc. lt may cause a fire or explosion.
1 PRECAUTION
6
WARNING
DO NOT TOUCH
Do not touch the laundry before the spin basket stops
completely.
The laundry entangles your hand causing an injury even if
the basket rotates slowly. Pay special attention to children.
INSTALL
CAREFULLY
Ask an electric work shop to install the product.
Install the product securely and safely according to the
electrical equipment technical standard and the wiring
standard.
Incorrect work causes an electric shock and a fire.
DO NOT PULL
Do not pull the power cord when unplugging.
Hold the power plug to unplug.
An electric shock or short circuit may cause a fire.
DANGER HAND
Do not insert your hand under the washing machine during
operation.
There is a rotary part under the machine which may cause
an injury.
WATER LEAKAGE
Before starting washing, open the faucet and check water
supply hose joint which shall not be loosened for no water
leaks.
The loose screw or hose joint may cause water leakage
resulting in an unexpected damage.
1 PRECAUTION
~
~
~
~
~
~
~
~
~
~
~
~
Dieses Handbuch passt für folgende Modelle
11
Inhaltsverzeichnis
Andere Panasonic Waschmaschine Handbücher
Panasonic
Panasonic NA-F500P Bedienungsanleitung
Panasonic
Panasonic NA-F70T1 Bedienungsanleitung
Panasonic
Panasonic NA-147VR1 Produkthandbuch
Panasonic
Panasonic NA-FS16X3 Bedienungsanleitung
Panasonic
Panasonic NA-F953B Betriebsanleitung
Panasonic
Panasonic NA-148VG4 Betriebsanleitung
Panasonic
Panasonic NA-127VB3WDA Bedienungsanleitung
Panasonic
Panasonic NA-FD125V3 Produkthandbuch
Panasonic
Panasonic NA-FS14G3ART Bedienungsanleitung
Panasonic
Panasonic NA-127XB1 Bedienungsanleitung
Panasonic
Panasonic NA-106VC6 Betriebsanleitung
Panasonic
Panasonic NA-F70GS Bedienungsanleitung
Panasonic
Panasonic NA-W1500T Produkthandbuch
Panasonic
Panasonic NA-107VC5 Betriebsanleitung
Panasonic
Panasonic NA-127VB6WSR Bedienungsanleitung
Panasonic
Panasonic NA-168VX2 Betriebsanleitung
Panasonic
Panasonic NA-120VX6 Produkthandbuch
Panasonic
Panasonic NA-W18XG1 Produkthandbuch
Panasonic
Panasonic NA-F100X1 Bedienungsanleitung
Panasonic
Panasonic NA-148VX3 Betriebsanleitung
