Panasonic CM402 Series Bedienungsanleitung

Intelligent Adhesive Tape Feede

Operating Instructions

Operation Manual

Thank you very much for purchasing the intelligent adhesive tape feeder for the CM402 series.

Before placing the machine in service, be sure to read the instruction manual for prope

usage.

fter that, store it carefully and read it if necessary.

IATF-E-OMAA-0003

“Use of this machine:

This machine is designed and constructed to be used for placing electric and electronic components on PCB.

This machine shall be used for this purpose only.

It shall not be used for any other purpose.”

“Operation of this machine:

This machine shall be operated by professional, specially trained operators.

It shall not be operated by non-professional, not specially trained operators.

Regarding the training course, please contact Panasonic Factory Solutions Co., Ltd. or PFSE.”

Machine was manufactured by: Panasonic Factory Solutions Co., Ltd.

441-13, Nagahasu, Tateishi-machi, Tosu-city, Saga, Japan

Phone number: 81-942-84-2644

Fax number: 81-942-84-2636

For Service and Supply of Spares in Europe

you may contact Panasonic Europe:

Continental Europe

PFSE

Panasonic Factory Solutions Europe

Winsbergring 15

22525 Hamburg Germany

Phone number: 0049-(0)40-85386-321

Fax number: 0049-(0)40-85386-332

United Kingdom

PFSE

Panasonic Factory Solutions Europe

Panasonic House,Willoughby Road

Bracknell, Berks. RG12 8 FP

Phone number: 0044-(0)1344-853267

Fax number: 0044-(0)1344-425970

Year: 2005

IATF-E-OMA00-A01-02

Introduction

This manual describes how to handle the intelligent adhesive tape feeder for the placement

machine CM402, and how to supply components.

Product code : KXFW1KSGA00

NOTICE

1. When the intelligent adhesive tape feeder is unpacked, its reel mount is detached.

Attach the reel mount to the main body before use.

(See 1.1 Preparation before Production)

2. For information on how to install it onto the main body of the placement machine,

refer to the Operation Manual for the placement machine.

NOTICE

This manual describes how to handle the intelligent adhesive tape feeder. The

following pages refer to “intelligent adhesive tape feeder” as “adhesive tape feeder.”

IATF-E-OMA00-A01-00

= MEMO =

IATF-E-OMA00-A01-00

TABLE OF CONTENTS

 Safety precautions .........................................................7

 About storage management and handling................................... 10

1. GENERAL DESCRIPTION.............................. 1-1

1.1 Preparation before Production..............................................................................1-2

1.2 Exterior Features .................................................................................................. 1-3

1.3 Switch and LED Features..................................................................................... 1-5

1.4 Model and Its Target Components ....................................................................... 1-6

2. ATTACHING/DETACHING THE ADHESIVE

TAPE FEEDER, SETTING THE TAPE, CHECKING

THE COMPONENTS ........................................... 2-1

2.1 How to Attach/Detach the Adhesive Tape Feeder ............................................... 2-2

2.1.1 How to Attach the Adhesive Tape Feeder.......................................................................................... 2-2

2.1.2 How to Detach the Adhesive Tape Feeder ........................................................................................ 2-4

2.2 Setting the Tape ................................................................................................... 2-5

2.2.1 How to Set the Tape........................................................................................................................... 2-5

2.2.2 How to Detach the Bottom Tape ...................................................................................................... 2-11

2.3 Checking the Components ................................................................................. 2-12

3. CLEANING ...................................................... 3-1

3.1 Cleaning the Tape Paths ...................................................................................... 3-2

3.2 Cleaning the Collectively Changing Truck............................................................ 3-3

INDEX

IATF-E-OMA00-A02-00

SAFETY PRECAUTIONS

Be sure to observe

The precautions that shall be observed in order to prevent an injury to the user or the

other persons, and damage to property, are described as follows.

 The degrees of danger or injury, resulting from incorrect usage owing to failure to read an

indication, are classified and described as follows.

WARNING This indication refers to a situation which is considered that there is a

possibility of death or serious injury.

CAUTION This indication refers to a situation which is considered that there is a

possibility of only injury or physical damage.

 The matters that shall be observed are classified by the symbols shown below, and

described.

(The following are the examples of the symbols.)

This kind of symbol indicates the matters to which attention must be paid.

This kind of symbol indicates an action that must not be carried out.

This symbol indicates an action that must be carried out.

IATF-E-OMA00-A03-01

WARNING

IATF-E-OMA00-A03-00

CAUTION

IATF-E-OMA00-A03-00

About storage management and handling

This describes the precautions in the storage of adhesive tape feeders.

1 Storage Precautions

 Use a feeder stand for storage.

If you pell-mell place adhesive tape feeders, the parts may potentially be broken or deformed.

No pell-mell placing Store them on the feeder stand.

 Avoid storing them in a high-temperature (40 degrees or over) and

high-humidity place.

The formation of rust can cause such a trouble as faulty sliding.

NOTICE

In handling adhesive tape feeders, be sure to observe the following matters.

The matters are the same as those for intelligent tape feeders.

IATF-E-OMA00-A04-00

IATF-003E

INTF-007E

IATF-003E

5050

4040

3030

2020

1010

℃

℃℃

℃

Inhaltsverzeichnis

Andere Panasonic Drahtvorschubgerät Handbücher

Panasonic

Panasonic YW-50DNW Bedienungsanleitung

Beliebte Drahtvorschubgerät Handbücher anderer Marken

Abicor Binzel

Abicor Binzel MFS-V2 Bedienungsanleitung

Emotron

Emotron CDN Series Bedienungsanleitung

Robe

Robe TAP5-EZ2-32-F4 Montageanleitung

WIA

WIA W64-1 Bedienungsanleitung

GYS

GYS SMARTFEED M-4 Bedienungsanleitung

GYS

GYS Easy Tig Bedienungsanleitung

Lincoln Electric

Lincoln Electric LN-25X Bedienungsanleitung

Matrix

Matrix OmniFlow 330 Technisches Datenblatt

EWM

EWM drive 4X IC D EX Bedienungsanleitung

Lincoln Electric

Lincoln Electric 12442 Bedienungsanleitung

Aim

Aim AIVE Installationsanleitung

Lincoln Electric

Lincoln Electric Power Feed 10 Robotic K1780-2 Bedienungsanleitung

Miller

Miller XR-AlumaFeed Suitcase Bedienungsanleitung

Lincoln Electric

Lincoln Electric Activ8X Bedienungsanleitung

Abicor Binzel

Abicor Binzel iROB Feed HA Bedienungsanleitung

EWM

EWM drive 4X IC D EX Bedienungsanleitung

Lincoln Electric

Lincoln Electric LF-72 Bedienungsanleitung

Hakko Electronics

Hakko Electronics 373 Bedienungsanleitung