PAPERANG MonoSnap Pro Bedienungsanleitung

MonoSnap Pro (Ages 13+)

USER MANUAL

Model:

PCZ2

Customer Service

Scan the QR code to join our !

Telegram group for support.!

Please be sure to specify the

model number.

This guide contains all the info you need to get from setup to your shots.

Use with oﬃcial grayscale thermal paper for best printing quality.

Grayscale printing may not be available in certain countries.

LED Power !

Button

Shutter !

Button

Lens

USB-C Port

Print Head

Serrated Edge

Reset Hole

Fig. 2

Fig. 3

Fig. 1

Accessories Included

At a Glance

Chapter 1: Safety Instructions!

1. Adult Supervision: The MonoSnap camera is designed for teenagers and above.

Use the camera under adult supervision to ensure safe handling.!

2. Safe Handling: Hold the camera securely and avoid touching the internal print

head while it is hot. Wait for it to cool down before attempting to open the

camera.!

3. Built-In Rechargeable Battery: Use only the provided USB-A to C cable for

charging the MonoSnap camera. Other cables may not be compatible and could

pose safety risks.!

4. Proper Charging: Connect the USB-A end of the cable to a suitable USB-A

power source. Insert the USB-C end into the camera's charging port. Monitor

the charging process and disconnect the cable once the battery is fully charged.!

5. Battery Maintenance: To maximize battery life and safety, avoid exposing the

camera to extreme temperatures (both hot and cold). Do not attempt to

disassemble, puncture, or tamper with the battery or camera.!

6. Waterproof Caution: Please note that the MonoSnap camera is not waterproof.

Keep the camera away from water and moisture to avoid damage. Do not

submerge the camera or expose it to rainy or wet conditions.!

7. Proper Storage: Store the MonoSnap Pro camera in a safe place when not in

use. Keep it out of the reach of young children and away from moisture, extreme

temperatures, and direct sunlight.!

8. Responsible Sharing: Respect the privacy of others and obtain permission

before taking photos. Share photos responsibly and with respect for others'

rights.!

Chapter 2: Getting Started

a. Use It As an Instant Camera

1. Charging Your MonoSnap!

•Connect the USB-C end of the provided cable to your MonoSnap camera.!

•Plug the other end of the cable into a USB-A power source.!

•Allow the camera to charge until the battery is full (It takes about 1.5 hours to

fully charge).!

2. Powering on!

•Locate the power button on your MonoSnap camera.!

•Press and hold the power button for 3 seconds to power on the camera.!

3. Launching the Viewﬁnder !

•Press the red button on top to extend the viewﬁnder for framing your shot. You

can manually push the viewﬁnder back after use.!

NOTE: The MonoSnap uses a special viewﬁnder located slightly above the

camera's lens. This means that what you see through the viewﬁnder is from a

diﬀerent perspective than what the lens is seeing. As a result, you’ll need to

adjust your aim a little upwards to compose your shot correctly. (Fig. 1)

4. Capturing a Photo !

•Point the camera at your subject using the viewﬁnder.!

•Press the shutter button to instantly capture the photo.!

5. Printing and Sharing!

•Wait for the camera to process the image and print it instantly.!

•Once printed, carefully tear oﬀthe photo against the serrated edge.!

•Share the instant printout with others or keep it as a physical memento.!

6. Loading the Paper Roll!

•Slide to open the paper compartment cover. (Fig. 2)!

•Remove the remaining paper roll, if present. !

•Insert a new paper roll into the compartment and make sure the smooth side of

the paper is facing up. (Fig. 3)!

•Close the paper compartment cover securely. !

7. Powering oﬀ!

•Press and hold the power button for 3 seconds to power oﬀthe camera after

use.!

b. Use It As a Thermal Printer

1. Download and install the PAPERANG app.!

2. Press & hold the power button for 3 seconds to turn on the printer.!

3. Turn on Bluetooth on your mobile device and place it close to the printer.!

4. Launch the PAPERANG app.!

5. Pairing with the printer!

Method 1: Tap the ⊕button in app > Choose “PAPERANG P2 Camera” from

the list of nearby devices > Complete pairing.!

Method 2: Double press the power button to print a QR code > Tap the [—]

button in app to scan the code > Complete pairing.!

6. Select the paper type to be used.!

7. Start printing using the PAPERANG app. (For more info on how to print

documents with your smartphone, select “Documents Print" and tap the “?”

icon from the upper right corner of the app).!

8. Tearing oﬀthe print manually.!

9. Press and hold the power button for 3 seconds to turn oﬀthe printer after use.!

Chapter 3: Problems? No Problem!

How long can it be used on a single charge?!

•One roll of 300dpi grayscale print.!

Why is there a discrepancy between the range printed and what is seen through

the viewﬁnder? !

•The viewﬁnder design is similar to that of a rangeﬁnder camera, resulting in a

slight deviation between the viewﬁnder and camera lens. The actual captured

image may appear slightly lower than what is seen in the viewﬁnder. Shooting

technique: Align the subject within the viewﬁnder and slightly lift the bottom of

the camera by about 5 degrees for the best results. (Fig. 1)!

What is the resolution of the camera? !

•The camera has a 1-megapixel wide-angle lens with a DFOV of 70 degrees. It

also comes with an ISP for professional image processing. It delivers good

imaging results when capturing subjects from a distance of half a meter or more.!

How to unbind the device?!

•Log in to the PAPERANG app using the PAPERANG account that is bound to

the device. Click on the device name in the upper-left corner, access the three

dots menu, and select "Delete PAPERANG."!

How long does it take to fully charge?!

•It takes about 1.5 hours to fully charge.!

Unable to connect to the PAPERANG app? !

•Check if Bluetooth is enabled on your phone and if a usable network connection

is established.!

•Verify that the Bluetooth permission is granted on your phone. Some Android

systems require granting location access.!

•Ensure that the camera has suﬃcient battery power (press and hold the power

button for 3 seconds to conﬁrm if it can be powered on; if not, charge it ﬁrst).!

•Check if the printer is bound to other devices; if so, it needs to be unbound ﬁrst.!

Unable to print? !

•Ensure that Bluetooth is enabled on your phone and verify that it is not

connected to other devices.!

•Check if the thermal paper has run out.!

•Check if the thermal print head is overheated (indicated by a ﬂashing white

light). If overheated, wait for the print head to cool down before attempting to

print again.!

•Restart the camera and try reconnecting the Bluetooth.!

Why is no content being printed? !

•Conﬁrm that the consumables are installed correctly, with the correct orientation

(that is, the smooth side faces up). (Fig. 3)!

How to restart the device if it freezes?!

•Slide open the compartment cover, remove the consumables, and press the

Reset pinhole once with a paperclip to restart the device.!

How to check the battery level?!

•If the device is connected to the PAPERANG app, click on the device name in

the upper-left corner of the app, and the remaining battery level will be

displayed.!

Does this printing camera require carbon ribbons?!

•It is a thermal printer that does not require carbon ribbons or ink cartridges. Only

thermal paper is needed for printing.!

What is the diﬀerence between regular thermal paper and grayscale thermal

paper?!

•Grayscale paper has a brighter surface and provides more delicate print results.!

Does the printing paper contain bisphenol A?!

•The provided paper roll does not contain harmful substances such as

ﬂuorescent agents, bisphenol A, or bisphenol S.!

How long does the printout last?!

•The printout has a longevity of at least 5 years.!

Chapter 4: Speciﬁcations

Model

PCZ2

Technology

Direct Thermal Printing

Print Resolution

300dpi

Min. Print Speed

2.3mm/s

Connectivity

Bluetooth

Compatible Consumable

Grayscale Thermal Paper (57 x ⌀30mm)

Photo Aspect Ratio

4:3

Megapixels

1MP

Lens

Wide-Angle Lens

Focus Range

50cm - Inﬁnity

Diagonal Field of View

70-Degree

Battery Capacity

1,200mAh

Interface

USB-C

Input

5V⎓1A

Weight

approx. 250g (exl. paper roll)

Dims.

105 x 90 x 52mm

PAPERANG is a registered trademark of Xiamen PAPERANG Technology Co., Ltd.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PAPERANG Etikettendrucker Handbücher

PAPERANG

PAPERANG PKT-LP108 Bedienungsanleitung

Beliebte Etikettendrucker Handbücher anderer Marken

Brother

Brother P-Touch 2420PC Bedienungsanleitung

newell

newell Dymo LabelManager 210D Bedienungsanleitung

Brother

Brother TD-4000 Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Brother

Brother E300 Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6057 Service-Handbuch

Brother

Brother P-touch PT-9700PC Bedienungsanleitung

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung