Parkeon Strada Transfer Bedienungsanleitung

Ref.: 504011588_1

Strada Transfer & Rapide

Evolution 2

With Strada Evolution 1 fastening kit and anchoring

protection plate

Installation manual

Strada Evolution - Transfer and Rapide - Installation manual

/ 4

Original edition in French (ref.504011589_1)

Translated into English in May 010







Parkeon reserves all proprietary rights relating to the contents of this

document. Parkeon reserves all rights over usage, reproduction,

representation, marketing, translation, adaptation or modification, and

generally all rights over present and future utilisation by any means, for

any purpose and in any territory, throughout the period of protection. All

use of the contents of this document requires the prior written

permission of Parkeon. Parkeon reserves the right to change data,

drawings and descriptions without prior notice. Certain characteristics

may vary according to customer requirements and do not represent a

commitment by Parkeon.

Parkeon Ltd

10 Willis Way

Poole, Dorset BH15 3SS

Phone +44(0) 1 0 339 494

Fax: +44(0) 1 0 667 93

Parkeon Inc.

40 Twosome Drive, Unit 7

Moorestown

NJ 08057 - USA

Phone +1 856 34 8000 - Fax +1 856 34 7178

Parkeon S. .S.

Parc La Fayette, 6 rue Isaac Newton,

5075 Besançon Cedex 9 - France

Phone +33 (0)3 81 54 56 00 – Fax +33 (0)3 81 54 49 96

Head office: Le Barjac, 1 boulevard Victor, 75015 Paris - France

Phone +33 (0)1 58 09 81 10 – Fax +33 (0)1 58 09 81 6

Parkeon S.A.S au capital de 30.38 .146 euros

444 719 7 R.C.S. Paris

Printed in France.

Strada Evolution - Transfer and Rapide - Installation manual

3 / 4

Contents

1. Safety ........................................................................................4

2. bout this document…....................................................................7

3. Tools .........................................................................................8

4. Dimensions ..................................................................................8

5. Opening the door and trap door ........................................................9

5.1 Configuration with mechanical lock ................................................ 9

5.2 Unlocking the access door ......................................................... 10

6. nchoring in an excavation with a base box ....................................... 11

6.1 Recommendation.................................................................... 11

6.2 Composition of fasteners........................................................... 11

6.3 Excavation installation with base box (1 00 mm high) ........................ 1

6.4 Excavation installation with variable height base box......................... 17

6.5 Excavation installation with base box on sloping ground...................... 1

7. nchoring on flat ground with base box ............................................ 22

7.1 Recommendation....................................................................

7.2 Composition of fasteners...........................................................

7.3 Installation on flat ground with base box (1337 mm high) .................... 3

7.4 Installation on flat ground with base box (1 00 mm high) .................... 7

8. nchoring on flat ground without base box ........................................ 32

8.1 Recommendation.................................................................... 3

8.2 Composition of fasteners........................................................... 3

8.3 Anchoring on flat ground without base box ..................................... 33

9. Installing the upper part of the terminal ........................................... 37

9.1 Parking terminal alone ............................................................. 37

9.2 Terminal with integrated solar module and/or antenna protection......... 37

9.3 Terminal with zone indicator...................................................... 38

9.4 Terminal with integrated solar top and /or antenna cover and zone

indicator ............................................................................. 38

10. pplying the stickers.................................................................... 40

10.1 Sticker plate (CONF1 to CONF14) ................................................. 40

10.2 Zone marking ........................................................................ 41

11. Installing the battery.................................................................... 42

1 - Safety

Strada Evolution - Transfer and Rapide - Installation manual

4 / 4

Safety

Parkeon products are designed to limit the risk to users or operators from power sources, high

temperature, fire, mechanical parts, radiation or chemicals.

The product is compliant with the directive:

Directive 2004/40/EC of the European Parliament and of the Council of 9 April 004 on the

minimum health and safety requirements regarding the exposure of workers to the risks

arising from physical agents (electromagnetic fields).

Follow the basic precautions below for the safety of personnel and the environment. The list is not

comprehensive and is only aimed at drawing your attention to the potential risks of poorly

performed work and negligence:

•All product-servicing operations require appropriate training. Only adequately trained

personnel may work on the mains power supply.

•Wear personal protective equipment suited to the nature of the work to be performed.

•Use appropriate tools that are in good condition, for their intended purpose.

•Mark out the anchoring system in the street while the concrete is setting in order to inform

others of the risk of obstruction. This may be achieved as shown below, providing it is in

accordance with local regulations:

CE Marking

Europe

This product is compliant with the CE marking. The mandatory directives depend on the radio

communication option:

With a radio communication option (GPRS, WIFI, short range devices, …)

The product is compliant with the following standards:

-Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999

on radio equipment and telecommunications terminal equipment and the mutual

recognition of their conformity.

-Council Recommendation 1999/519/EC of 1 July 1999 on the limitation of exposure

of the general public to electromagnetic fields (0 Hz to 300 GHz).

Without the GPRS option:

The product is compliant with the following directives:

-Directive 2006/95/EC of the European Parliament and of the Council of 1 December

006 on the harmonization of the laws of Member States relating to electrical

equipment designed for use within certain voltage limits.

D3979

D4136

1 - Safety

Strada Evolution - Transfer and Rapide - Installation manual

5 / 4

-Directive 2004/108/EC of the European Parliament and of the Council of 15

December 004 on the approximation of the laws of the Member States relating to

electromagnetic compatibility and repealing Directive 89/336/EEC.

United States of merica

This product is compliant with:

The National Electrical Code

The Americans with Disabilities Act (ADA)

The Federal Communication Commission (FCC) rules part 15

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

. This device must accept any interference received, including interference that may cause

undesired operation.

Note: The manufacturer is not responsible for any radio or tv interference caused by

unauthorized modifications to this equipment. Such modifications could void the user's

authority to operate the equipment.

Electricity

•All product-servicing operations require appropriate training.

•Only adequately trained personnel may work on the mains power supply.

•Protect personnel from electrical shocks with the help of appropriate electrical and earth

connections.

•Always switch off the power before beginning some repairs, as instructed in this manual.

•Make sure that the electrical parts are installed in accordance with national standards.

•Keep the mains power supply disconnected throughout these operations. Protect the

electrical wires from the rain. Never work on products connected to the mains or the

telephone network during stormy weather.

•While repairing a circuit breaker installed on a machine, the main circuit breaker located in

the technical unit must be switched off and marked with maintenance information so as to

protect the agent from electric shocks.

•Isolate the mains power supply with the circuit breaker and switch off the low-voltage

power with the On/Off button on the main board.

•Make sure that the earth cable is in good condition.

•Follow the instructions relating to the earth connections of product components in order to

ensure compliance with EMC immunity and emissions standards.

•Minimum and maximum diameter of mains power supply cables: 1.5 to .5 mm².

•Ask for a signed certificate from the contractor.

0 -

Strada Evolution - Transfer and Rapide - Installation manual

6 / 4

Mechanical parts

•Always remove any metal jewellery (rings, bangles, bracelets or wristwatches) before

beginning work on or near electrical parts (power supply, battery, wiring) or moving parts.

•Do not bring your hand close to mobile parts, moving parts or sharp parts, door hinges or

locks and pinions or blades.

•Take care to avoid injury by the open door or any other protruding part or part fixed to the

product.

Temperature

•Always wait for a few minutes after switching off the Pay & Display machine before you start

working near the hot areas of the intermittent heating devices.

Dry cells / Batteries

•Always take care to comply with the polarity of batteries and cells.

•Do not obstruct the operating of the lithium cell of the main board. Explosion hazard.

•Never throw away, burn or open the buffer batteries or cells. Use the appropriate procedures

as recommended by the competent health and safety authorities. These elements must be

disposed of in accordance with local regulations.

IMPORT NT:

Parkeon shall not be liable for any modifications to the Pay & Display machine or failure

to use it in accordance with the instructions in this manual.

Environment

The product is compliant with the directives:

•Directive 2002/95/EC of the European Parliament and of the Council of 7 January 003 on the

restriction of the use of certain hazardous substances in electrical and electronic equipment

(ROHS).

•Directive 2002/96/EC of the European Parliament and of the Council of 7 January 003 on

waste electrical and electronic equipment (WEEE).

Disposal of used equipment

The presence of this symbol on the product or packaging means that it may not be disposed of with

ordinary waste.

Products bearing this symbol shall be disposed of using special procedures in accordance with

European Directive 00 /96 on waste electrical and electronic equipment

2 - About this document…

Strada Evolution - Transfer and Rapide - Installation manual

7 / 4

2. bout this document…

This document is to be used by personnel responsible for construction and masonry

work.

With a universal power supply, the installation requires the simultaneous presence

of a qualified electrician for the connections and a maintenance agent for the

general installation of the terminal.

These instructions must be followed for optimised terminal installation.

Please refer to the installation manual of the universal mains power supply for

instructions relating to the installation of such power supplies.

Refer to the User manual for general instructions.

Refer to the Maintenance manual for putting into service, troubleshooting and the

replacement of subassemblies.

3 - Tools

Strada Evolution - Transfer and Rapide - Installation manual

8 / 4

3. Tools

Use clean grease-free tools to install the terminal correctly.

Appropriate tooling will be required for correctly installing the removal protection nut.

The following are needed for preparing a terminal:

•door opening tool (ref. 135964),

•square key (ref. 135078),

•ratchet handle,

•16-mm socket.

The following are needed for fastening the terminal on flat ground or in an

excavation:

•rule,

•spirit level,

•4-mm eye type spanner,

•ratchet handle,

•4-mm socket.

The following are needed for installing the upper part of the terminal:

•ratchet handle,

•13-mm socket.

4. Dimensions

Keep minimum clearance around the terminal (30 x 30 cm) to enable movement

during installation and when it is used by motorists:

•0 cm at the rear and on the sides,

•1 metre in front.

Installation in an excavation will require a hole that is 60 cm long x 60 m wide x

60 cm deep, in keeping with the dimensional constraints of the terminal.

The mains cable (optional mains power supply) goes through the centre of the

housing.

5 - Opening the door and trap door

Strada Evolution - Transfer and Rapide - Installation manual

9 / 4

5. Opening the door and trap door

IMPORT NT:

First make sure that the keys to the upper maintenance door are available.

5.1 Configuration with mechanical lock

•Carry the terminal up to the site on its transport pallet.

•Unpack the terminal.

•Open the housing door.

IMPORT NT:

The mechanical lock is protected by guard covers in order to reduce the

risk of vandalism.

Detail ( )

To open the door:

•Insert the key in the lock;

•With the end of the key, push the first cover to the left (1) then the second

one to the right (2);

•When the lock is accessible, insert the key and unlock the door (3).

•Open the maintenance door.

Guard covers

Detail ( )

D8755

D8758

5 - Opening the door and trap door

Strada Evolution - Transfer and Rapide - Installation manual

10 / 4

5.2 Unlocking the access door

•

Unlock the flap that holds the

access door lock.

•Lift the access door lock.

IMPORT NT:

After the parking terminal is installed, lower the access door lock to lock

the door.

•Open the door with the

square key.

•Remove the door.

•Unfasten and remove the

four fastening screws (use a

ratchet handle and a 16-mm

socket).

D8756

ccess door locking flap

ccess door lock

D635

Screws

(x4)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Parkeon Digitale Beschilderung Handbücher

Parkeon

Parkeon Strada PAL Bedienungsanleitung

Beliebte Digitale Beschilderung Handbücher anderer Marken

LG 72WS70MS-B Bedienungsanleitung

SMART-AVI

SMART-AVI SIGNAGEPRO Bedienungsanleitung

LG 65SM5D Bedienungsanleitung

LG 55EW5TK-A.AUS Bedienungsanleitung

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

LG 47VL10 Bedienungsanleitung

LG WP400 Kurzanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

LG 22XE1J Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

LG 84TR3B Bedienungsanleitung

LG 55EJ5D Kurzanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

LG 75XS4G Bedienungsanleitung