Parkside PDRS 6.3 B2 Bedienungsanleitung

AIR RATCHET SET PDRS 6.3 B2

IAN 315475

AIR RATCHET SET

Translation of the original instructions

DRUCKLUFT-

RATSCHENSCHRAUBER

Originalbetriebsanleitung

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

GB/IE/NI Translation of the original instructions Page 1

DE/AT/CH Originalbetriebsanleitung Seite 33

GB│IE│NI │ 1 ■

PDRS 6.3 B2

Contents

Introduction...................................3

Intended use..........................................3

Features .............................................4

Package contents ......................................5

Technical data ........................................5

General safety instructions forcompressed air tools..7

Hazards caused by ﬂying parts ..........................13

Hazards caused by entanglement ........................14

Hazards during operation ..............................14

Hazards caused by repetitive movements ..................15

Hazards caused by accessories..........................16

Hazards in the workplace ..............................16

Hazards caused by dust and vapours .....................17

Hazards caused by noise...............................17

Hazards caused by vibrations ...........................18

Additional safety instructions for pneumatic machines.........19

Additional safety notices ...............................20

Before use ...................................21

Fitting the connector nipple .............................21

Lubrication ..........................................22

Reﬁlling oil ..........................................22

Connecting to a compressed air source....................23

Operation ...................................24

Compressed air ratchet ................................24

Switching on and oﬀ ..................................24

■ 2 │ GB│IE│NI PDRS 6.3 B2

Maintenance and cleaning......................25

Troubleshooting ..............................26

Disposal.....................................26

Kompernass Handels GmbH warranty ...........28

Service .............................................30

Importer ............................................30

Translation of the original Conformity Declaration ..31

GB│IE│NI │ 3 ■

PDRS 6.3 B2

AIR RATCHET SET PDRS 6.3 B2

Introduction

Congratulations on the purchase of your new appliance. You have

chosen a high-quality product. The operating instructions are part of

this product. They contain important information about safety, usage

and disposal. Before using the product, please familiarise yourself

with all operating and safety instructions. Use the product only as

described and for the range of applications speciﬁed. Please also

pass these operating instructions on to any future owner.

Intended use

The ratchet attachment is suitable for fastening and loosening screw

connections in the automotive (tyre ﬁtting, etc.) and agricultural

ﬁelds. Note the necessary torques when tightening screws and nuts.

The tool may only be operated with a compressed air supply. The

maximum permissible operating pressure speciﬁed on the tool must

not be exceeded.

This tool must not be operated with gases that are explosive, ﬂamma-

ble or hazardous to health.

Do not use as a lever, crusher or striking tool.

Any other usage or modiﬁcation of the tool is deemed to be improp-

er and carries a signiﬁcant risk of accidents. The manufacturer ac-

cepts no responsibility for damage(s) resulting from improper usage.

This tool is intended for domestic use only.

■ 4 │ GB│IE│NI PDRS 6.3 B2

Symbols on the compressed air tool:

WARNING! Read the operating instructions before use.

Always wear eye protection when using or maintain-

ing the compressed air tool.

Always wear a dust mask in situations in which dust

is being generated.

Always wear hearing protection.

Oil daily

Features

Compressed air ratchet

Air inlet

Connector nipple (preassembled)

Trigger

Square retainer

Turn bolt

Oil bottle

Screwdriver bits

Sockets

Bit holder

Extension piece

Universal joint

GB│IE│NI │ 5 ■

PDRS 6.3 B2

Package contents

1Compressed air ratchet

7 sockets (10 mm/11/13/14/15/17/19)

3 screwdriver bits (PH2/ PH3/ SL 5,5)

1 extension piece 75mm

1 bit holder

1 universal joint

1 oil bottle

1 connector nipple 6.35mm (1/4”) (preassembled)

1 carrying case

1 set of operating instructions

Technical data

Rated air pressure: max. 6.3 bar

Air consumption: 200 l/min

Max. rotation speed: max. 160 rpm

Max. torque: 61 Nm

Change of rotation: clockwise and anticlockwise

Tool ﬁtting: 1/2”

Noise emission values:

Noise measurement determined in accordance with ISO15744:

Sound pressure level: LpA = 89.8 dB (A)

Uncertainty: KpA = 3 dB

Sound power level: LWA = 100.8 dB (A)

Uncertainty: KWA = 3 dB

Wear hearing protection!

■ 6 │ GB│IE│NI PDRS 6.3 B2

Vibration emission value:

Total vibration value calculated according to ISO 28927-2:

Compressed air ratchet:

ah= 2.58 m/s2

Uncertainty K = 0.76 m/s2

WARNING!

► The noise emission levels speciﬁed in these instructions have

been measured in accordance with the standardised measur-

ing procedure speciﬁed in ISO 15744 and can be used to

make equipment comparisons. The noise emission values vary

in accordance with the use of the compressed air tool and may

be higher than the values speciﬁed in these instructions in some

cases. It is easy to underestimate the noise emission load if the

compressed air tool is used regularly in a certain manner.

NOTE

► For an accurate estimate of the noise emission load during a

certain working period, the times during which the appliance is

switched oﬀ or is running but not actually being used must also

be taken into consideration. This can signiﬁcantly reduce the

noise emission load over the total working period.

GB│IE│NI │ 7 ■

PDRS 6.3 B2

WARNING! General safety instructions for

compressed air tools

WARNING!

►Read all safety warnings and all instructions. Failure to fol-

low the warnings and instructions may result in electric shock,

ﬁre and/or serious injury.

NOTE

► The terms "compressed air tool" or "tool" used in the following

text refer to the compressed air tools speciﬁed in these operat-

ing instructions.

Save all warnings and instructions for future reference.

■ The user must evaluate the speciﬁc risks that may arise due to

diﬀerent kinds of use.

■ Please ensure that you have read and understood the safety in-

structions before ﬁtting, operating, repairing, servicing or replacing

any accessories and before working near the compressed air tool.

Failure to do this can result in serious bodily injury.

■ The compressed air tool should only be set up, adjusted or used

by adequately qualiﬁed and trained operators.

■ The compressed air tool may not be modiﬁed. Modiﬁcations can

reduce the eﬀectiveness of the safety measures and increase the

risks for the operator.

■ Never use damaged compressed air tools. Maintain compressed

air tools with care. Check regularly whether moving parts function

correctly and do not jam; check whether any parts are broken or

damaged to an extent that the compressed air tool will no longer

operate correctly. Check signs and labels for completeness and

readability. If damaged, have parts repaired or replaced before

using the compressed air tool. Many accidents are caused by

poorly maintained compressed air tools.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Parkside Elektrowerkzeuge Handbücher

Parkside

Parkside PDT 40 F4 Bedienungsanleitung

Parkside

Parkside PSTK 800 A1 Bedienungsanleitung

Parkside

Parkside PGKGA 40-Li B2 Bedienungsanleitung

Parkside

Parkside PSTD 800 A1 Betriebsanleitung

Parkside

Parkside PSTDA 20-Li A2 Bedienungsanleitung

Parkside

Parkside PKGA 20-Li C2 Bedienungsanleitung

Parkside

Parkside PES 200 B1 Bedienungsanleitung

Parkside

Parkside PSTD 800 A1 Betriebsanleitung

Parkside

Parkside AIR STAPLER SET - 2 Bedienungsanleitung

Parkside

Parkside PEC 200 SE - 6 Bedienungsanleitung

Parkside

Parkside PKGA 14.4 A1 Bedienungsanleitung

Parkside

Parkside PMSA 12 B2 Bedienungsanleitung

Parkside

Parkside PMGS 12 D3 Bedienungsanleitung

Parkside

Parkside 373432 2104 Bedienungsanleitung

Parkside

Parkside 332006 1907 Bedienungsanleitung

Parkside

Parkside PAMFW 10.8 A1 Bedienungsanleitung

Parkside

Parkside 326401-1904 Bedienungsanleitung

Parkside

Parkside 373198 2104 Bedienungsanleitung

Parkside

Parkside PAH 1300 A1 Bedienungsanleitung

Parkside

Parkside PSTD 800 A1 Betriebsanleitung

Parkside

Parkside PMFW 280 A1 - 6 Bedienungsanleitung

Parkside

Parkside PKGA 16 A1 Bedienungsanleitung

Parkside

Parkside PHLG 2000 D3 Bedienungsanleitung

Parkside

Parkside PDRD A1 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch