Parkside PTS 710 B2 Bedienungsanleitung

ELECTRIC PLUNGE SAW

Operation and safety notes

Translation of the original instructions

ELEKTRO-TAUCHSÄGE

Bedienungs- und Sicherheitshinweise

Originalbetriebsanleitung

IAN 385125_2107

ELECTRIC PLUNGE SAW PTS 710 B2

GB/IE/NI Operation and safety notes Page 5

DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 30

1 3 4

5 62

1011

1516

1817 19 20

89x1.8

7000 HW

10 30

Z89/30

89x1.4

7000 HS

10 60

Z89/60

Weichholz & Weichmetalle

soft wood & soft metal

bois tendre & métal mou

89x1.4

7000 HS

10 80

Z89/80

Weichholz & Weichmetalle

soft wood & soft metal

bois tendre & métal mou

2627

5GB/IE/NI

Warnings and symbols used .......................................Page 6

Introduction ..........................................................Page 6

Intended use............................................................Page 6

Scope of delivery........................................................Page 7

Parts description.........................................................Page 7

Technical data ..........................................................Page 8

Safety instructions...................................................Page 9

General power tool safety warnings .........................................Page 9

Vibration and noise reduction ..............................................Page 12

Behaviour in emergency situations...........................................Page 12

Residual risks ...........................................................Page 12

Safety instructions for all saws ..............................................Page 13

Further safety instructions for all saws ........................................Page 13

Speciﬁc safety instructions for this saw........................................Page 14

Supplementary notes .....................................................Page 15

Safety instructions for abrasive cutting appliances ..............................Page 15

Further safety instructions for abrasive cutting applications ........................Page 17

Supplementary notes .....................................................Page 19

Safety instructions for grinding tools .........................................Page 19

Safety instructions for batteries/rechargeable batteries ..........................Page 20

Operation.............................................................Page 21

Inserting/replacing the battery .............................................Page 21

Check base plate/blade guard .............................................Page 21

Switching on and oﬀ .....................................................Page 22

Selecting the cutting depth.................................................Page 22

Fitting the rip fence.......................................................Page 22

Handling the circular saw .................................................Page 22

Types of saw blades......................................................Page 23

Markings for cutting line ..................................................Page 23

Connecting the sawdust extractor ...........................................Page 23

Changing the saw blade ..................................................Page 24

Switching the laser on and oﬀ ..............................................Page 24

Cleaning and care ...................................................Page 25

Cleaning...............................................................Page 25

Maintenance ...........................................................Page 25

Repair.................................................................Page 25

Storage ...............................................................Page 25

Transportation ..........................................................Page 25

Disposal...............................................................Page 26

Warranty .............................................................Page 27

Warranty claim procedure.................................................Page 27

Service ................................................................Page 27

EC declaration of conformity.......................................Page 28

UKCA declaration of conformity...................................Page 29

6 GB/IE/NI

Warnings and symbols used

The following warnings are used in this instruction manual, on the packaging and on the rating label:

Read the instruction manual.

Switch oﬀ the product and disconnect

it from the mains before making any

adjustments, performing maintenance,

cleaning and when the product is not

in use.

Follow the warnings and safety notes! Protection class II (double insulation)

Risk of electric shock! Alternating current/voltage

Maximum depth cut Direct current/voltage

CE mark indicates conformity with

relevant EU directives applicable for

this product.

UKCA mark indicates conformity with

relevant Great Britain regulations

applicable for this product (The UKCA

mark logo is valid in Great

Britain only).

ELECTRIC PLUNGE SAW

Introduction

We congratulate you on the purchase of your

new product. You have chosen a high quality

product. The instructions for use are part of the

product. They contain important information

concerning safety, use and disposal. Before using

the product, please familiarise yourself with all

of the safety information and instructions for use.

Only use the product as described and for the

speciﬁed applications. If you pass the product on

to anyone else, please ensure that you also pass

on all the documentation with it.

Intended use

This electric plunge saw (hereinafter “product” or

“power tool”) is suitable for sawing longitudinal

and cross cuts in a plunge cut into ﬁrmly

supported following materials:

Solid wood

Chip board

Plywood

Aluminium

Tiles

Stone

Plastics

Lightweight construction materials

7GB/IE/NI

Any other use or modiﬁcation of the product

are considered improper use and can result in

hazards such as death, life-threatening injuries

and damage. The manufacturer is not liable

for any damages caused by improper use. The

product is exclusively intended for domestic use.

The product is not intended for commercial use,

industrial operations or similar purposes.

Observe all applicable local safety regulations,

standards and ordinances. The use of noise

emitting power tools may be restricted to certain

times by national or local regulations.

Scope of delivery

mWARNING!

uThe product and the packaging are not

children’s toys! Children must not play with

plastic bags, sheets and small parts! There

is a danger of choking and suﬀocation!

1 Electric plunge saw

1 TCT saw blade Z89/30

1 Diamond-coated cutting saw blade

1 HSS circular saw blade Z89/60

1 HSS circular saw blade Z89/80

1 Rip fence

1 Suction hose

1 Hex key

1 Carrying case

1 Button cell

(Type: CR2023)

1 Operating instructions

Parts description

Before reading, unfold the page containing

the illustrations and familiarise yourself with all

functions of the product.

[1] Front handle

[2] Safety lock-out

[3] On/oﬀ switch

[4] Rear handle

[5] Power on/control lamp

[6] Power cord

[7] Base plate

[8] Scale for cutting depth

[9] Cutting depth pre-selector

[] Rip fence

[] Rip fence slot

[] Screw for rip fence

[] Viewing window for cutting line

Figure A

[] Battery compartment cover

[] Dust extractor connection

[] Spindle lock

Figure B

[] Clamping ﬂange

[] Tensioning screw

[] Saw blade

[] Hex key

Figure C

[] Laser on/oﬀ switch

[] Laser aperture

Figure D

[] Diamond-coated cutting saw blade

[] HSS circular saw blade Z89/60

[] HSS circular saw blade Z89/80

[] TCT saw blade Z89/30

[] Suction hose

8 GB/IE/NI

Technical data

Electric plunge

saw PTS 710 B2

Model number HG09158 VDE plug

HG09158-BS BS plug

Nominal output 710 W

Nominal voltage 230 V∼, 50 Hz

(Alternating current)

Idle speed n/n05500 min–1

Max. cutting depth 27 mm

Thread size M6

Protection class II / (double insulation)

Noise and vibration data

Noise measurement value determined in

accordance with EN 62841. The A-rated noise

level of the power tool is typically as follows:

Sound pressure level LPA = 100 dB(A)

Uncertainty KPA = 3 dB

Sound power level LWA = 111 dB(A)

Uncertainty KWA = 3 dB

mWARNING!

Wear ear muﬀs!

Vibration emission value

Cutting wood ah,W = 2.2 m/s2

Uncertainty K = 1.5 m/s2

Cutting metal ah,M =2,6 m/s2

Uncertainty K = 1.5 m/s2

NOTE

uThe declared vibration total values and

the declared noise emission values have

been measured in accordance with a

standard test method and may be used for

comparing one tool with another.

uThe declared total vibration values and the

declared noise emission values may also

be used for a preliminary assessment of

exposure.

mWARNING!

uThe vibration and noise emissions during

actual use of the power tool can diﬀer

from the declared values depending on the

manner in which the tool is used, especially

what kind of workpiece is processed.

Try to minimise exposure to vibration and

noise. Examples of measures to reduce

vibration include wearing gloves when

using the tool and limiting working time. All

parts of the operating cycle must be taken

into account (e.g. times when the power

tool is switched oﬀ and when it is running

idle in addition to the trigger time).

9GB/IE/NI

Safety instructions

General power tool safety

warnings

mWARNING!

uRead all safety warnings,

instructions, illustrations and

speciﬁcations provided with

this power tool. Failure to follow

all instructions listed below may result in

electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for

future reference.

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

a) Keep work area clean and well

lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in

explosive atmospheres, such as in

the presence of ﬂammable liquids,

gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders

away while operating a power

tool. Distractions can cause you to lose

control.

Electrical safety

a) Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power

tools. Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed

or grounded surfaces, such as

pipes, radiators, ranges and

refrigerators. There is an increased risk

of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering a

power tool will increase the risk of electric

shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged or

entangled cords increase the risk of electric

shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk

of electric shock.

f) If operating a power tool in a

damp location is unavoidable, use

a residual current device (RCD)

protected supply. Use of an RCD

reduces the risk of electric shock.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Parkside Gesehen Handbücher

Parkside

Parkside PFS 710 - MANUEL 5 Bedienungsanleitung

Parkside

Parkside PMTS 180 A1 Bedienungsanleitung

Parkside

Parkside PMTS 210 A1 Kurzanleitung

Parkside

Parkside PFS 710 D3 Bedienungsanleitung

Parkside

Parkside PZKS 2000 B2 Kurzanleitung

Parkside

Parkside 282495 Bedienungsanleitung

Parkside

Parkside PTS 500 A1 Bedienungsanleitung

Parkside

Parkside PTSS 1200 C2 Bedienungsanleitung

Parkside

Parkside 36453 Betriebsanleitung

Parkside

Parkside PHKS 1350 A1 Betriebsanleitung

Parkside

Parkside PHKS 1300 A1 Bedienungsanleitung

Parkside

Parkside PHKS 1350 B2 Bedienungsanleitung

Parkside

Parkside PHKS 66 Bedienungsanleitung

Parkside

Parkside PFS 710 A1 Bedienungsanleitung

Parkside

Parkside PFS 710 Kurzanleitung

Parkside

Parkside PDKS 6.0 A1 Bedienungsanleitung

Parkside

Parkside PKS 1700 B2 Bedienungsanleitung

Parkside

Parkside SABRE SAW PFS 710 A1 Bedienungsanleitung

Parkside

Parkside 373210-2104 Bedienungsanleitung

Parkside

Parkside PHKSU 710 A1 Betriebsanleitung

Parkside

Parkside PFS 710 D3 Bedienungsanleitung

Parkside

Parkside PSSAP 20-Li B2 Bedienungsanleitung

Parkside

Parkside PKS 1700 B2 Bedienungsanleitung

Parkside

Parkside PTS 500 A1 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung