Unlike the Ref. 5002, it indicates the moon phases
instead of the moon age and features apertures
instead of hands for the day of the week, month,
and leap year displays.
The totally new aspect of the Sky Moon Tourbillon
Ref. 6002 is its appearance, with lavish decorations
that elevate it to the status of a grand creation. To
refer to a case or a dial is almost a sacrilege in the
context of the Ref. 6002. Sculpture would be the
more fitting term for a genuine work of art like the
Sky Moon Tourbillon. In particular, it showcases
two artisanal skills: the art of the engraver and
that of the enameler. Since the advent of Geneva’s
watchmaking heritage in the late 16th century, both
of these crafts have been inseparably allied with
watchmaking..
Recommendations
WATER RESISTANCE
Although your watch is equipped with a water-re-
sistant crown, it is not protected at all against the
ingress of moisture because of the slot for the
minute repeater slide.
Therefore, exercise care to ensure that liquid does
not come into contact with your watch.
SERVICE
We recommend that you have your watch ser-
viced at least once every five years. For this pur-
pose, we suggest you take it to an Authorized
Patek Philippe Retailer who will send it to our
Geneva manufacture, the only location autho-
rized to service watches with minute repeaters.
You can then be assured that your watch will
be inspected and overhauled by a qualified mas-
ter watchmaker at Patek Philippe headquarters in
Geneva.
The master watchmaker will completely disas-
semble the movement and then inspect, clean,
and lubricate all the individual parts prior to re-
assembly. All functions of the watch will also be
tested in detail and the escapement regulated if
necessary. Finally, its rate accuracy will be moni-
tored and precision-adjusted for a further period
of at least two weeks.
The case and the buckle will be polished as per
your instructions and your watch will be returned
to you in mint condition. The entire process will
take several weeks because each watch must un-
dergo a complete series of tests to fulfill the strict
quality criteria of Patek Philippe.
If you have any questions regarding the main-
tenance of your watch, contact the Authorized
Patek Philippe Retailer nearest to you or our In-
ternational Customer Service department in Ge-
neva, or visit www.patek.com.
WINDING
We advise you to wind the watch before you put
it on. This way, you can avoid lateral pressure
on the winding stem which, in the course of the
years, could damage the stem tube.
Make sure you wind the watch gently and uni-
formly. If you proceed too vigorously, you could
damage the movement and break parts, especially
toward the end of the winding process. To reduce
this risk, Patek Philippe has equipped some of its
manually wound watches, including the reference
6002, with a dynamometric crown. This patented
Patek Philippe innovation prevents damage to
the winding mechanism when the mainspring is
fully tensioned. When you hear a succession of
soft clicks, this indicates that the watch is now
wound. This clicking sound is absolutely normal
and indicates when you can stop winding the
watch.
