mode, directly press the recording button to record, the camera will
give two short vibrations, the red indicating light on its top will
blink, under the video-recording state, press the recording button
again, the camera will give two short vibrations come with beep
prompt, the indicating light will stop blinking, the camera will stop
and save the video.
Under the power-off state, press the recording button for 3 seconds,
the camera will be turned on automatically and start the
video-recording function, at this time, if needing to end and save
the video, methods are same as above.
In case of shooting at dark night, press the IR button, then the IR
light will be turned on and enter the night shooting mode, pictures
shot at night are black and white.
After turned on, the camera will directly enter the camera preview
mode, press directly the photo button to shoot photos, in case of
shooting at dark night, turn on the IR light or white light of the
camera to shoot.
Under the video-recording state, press the photo button to capture
the picture recorded at that time.
