Page 1of 3
Press
MENU
to access the Admin
MENU
Press 3 for SET-UP
Press 3 for SYSTEM SET-UP
Enter default Admin password 000000, press OK
Enter new Admin password
Confirm new Admin password
Press Menu to access
ADMIN MENU
.
Select 3 for
SET-UP
, press OK
Select 1 for OPTIONS, press OK
Key in Admin password, press OK
Select MERCHANT LANGUAGE using scroll arrows
Choose Language
Press Menu to access
ADMIN MENU
(default password is 000000)
Use scroll arrows to each 9, or Press 9 to access
PASSWORDMENU
Options
CHANGING MERCHANT AND ADMIN PASSWORDS
TO CHANGE MERCHANT PASSWORD
PRESS1
Enter current password, press OK
Set new password, press OK
Confirm new password, press OK
PRESS 2
Enter current password, press OK
Set new password, press OK
Confirm new password, press OK
To access letters on the numeric
keypad, press the key quickly until
the desired letter appears.
For [ .] press UP scroll arrow
Useyellow Arrow Button to go back
Lit arrows on the terminal screen
indicate more menu options. Press
up or down arrows to reach options
Remove back cover of terminal
Connect the S300 POS connector cable
Replace back cover of terminal
Connect power cable to S300 connector cable
(terminal is turned on/off via power connection)
Connect Ethernet cable to red LAN port on S300 POS connector cable
Connect other end of Ethernet cable to router
To begin configuration, exit ECR mode by pressing red cancel button
Enter admin password. Terminal will now be in Admin mode
To return to ECR mode press yellow arrow button
PAX S300 Reference Guide
Integrated Mode
Cables Required:
For LAN connection:
S300 POS connector cable
S300 Power Cord
Ethernet Cable
For serial connection:
S80 Download cable
DB 9 USB to serial convertor
