PCE Instruments PCE-RE01 Bedienungsanleitung

TEMPERATURE CONTROLLER 76x34 mm

PCE-RE01

USER’S MANUAL

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

[email protected]

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Unit 11

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

[email protected]

Contents

1.APPLICATION ........................................................................ 5

2.CONTROLLER SET................................................................... 5

3.FUNDAMENTAL REQUIREMENTS, OPERATIONAL SAFETY ................... 6

4.ASSEMBLY ........................................................................... 6

4.1 INSTALLATION OF THE CONTROLLER ....................................... 6

4.2 ELECTRICAL CONNECTIONS................................................... 8

4.3 INSTALLATION RECOMMENDATIONS ....................................... 8

5.COMMENCEMENT OF OPERATION................................................ 9

6.OPERATION ......................................................................... 11

6.1 PROGRAMMING THE CONTROLLER’S PARAMETERS....................12

6.2 PROGRAMMING MATRIX ..................................................... 13

6.3 CHANGE OF THE SETTING.................................................... 14

6.4 DESCRIPTION OF PARAMETERS ............................................ 15

7.CONTROLLER INPUTS AND OUTPUTS .......................................... 20

7.1 MEASUREMENT INPUT........................................................20

7.2 BINARY INPUT..................................................................20

7.3 OUTPUTS........................................................................ 20

8.CONTROL ............................................................................ 21

8.1 ON-OFF ALGORITHM .......................................................... 21

8.2 SMART PID INNOVATIVE ALGORITHM .....................................21

8.2.1 PULSE REPETITION PERIOD................................................ 22

8.2.2 SELF-TUNING................................................................. 22

8.2.3 PROCEDURE TO FOLLOW WHEN THE PID CONTROL IS UNSATISFACTORY ... 25

9.ALARM AND SOUND ALARM ..................................................... 26

10.ADDITIONAL FUNCTIONS........................................................28

10.1 DISPLAY OF THE CONTROL SIGNAL .......................................28

10.2 MANUAL CONTROL ........................................................... 28

10.3 FACTORY SETTINGS.......................................................... 28

11.PROGRAMMING INTERFACE.................................................... 29

11.1 INTRODUCTION................................................................ 29

11.2 ERROR CODES................................................................. 29

11.3 REGISTER MAP................................................................ 29

12.ERROR SIGNALLING.............................................................. 37

13.TECHNICAL SPECIFICATION..................................................... 38

14.CONTROLLER DESIGN CODE.................................................... 41

The manual applies to the controller with software v1.02 or higher.

1. APPLICATION

Controller PCE-RE01 is designed to control temperature. It cooperates

directly with resistance-type sensors Pt100, Pt1000 and NTC.

The controller has one output for on-off control and one output for alarm

signalling. The on-off control employs the PID or on-off algorithm. For the

on-off control, the minimum on and off times for the output may be set.

The control output has a changeover contact and allows for the direct

control of low-power objects.

An innovative SMART PID algorithm is implemented in the controller.

In addition, the controller has a binary input to control the controller’s fun-

ctions and an internal sound signalling device.

2. CONTROLLER SET

The delivered controller set is composed of:

1. controller......................................... 1 piece

4. holding clips ...................................... 4 pieces

3. BASIC REQUIREMENTS, OPERATIONAL

SAFETY

In the safety service scope, the controller meets to requirements of the

EN 61010-1 standard.

Observations Concerning the Operational Safety:

•The assembly and installation of electrical connections shall be

performedbyapersonqualiedfortheassemblyofelectricaldevices.

•Check if the connections are made correctly before powering on the

controller.

•Power off the controller and disconnect measuring circuits before

removing the controller’s housing.

•The removal of the controller’s housing during the validity of the war-

rantyagreementnulliestheagreement.

•The devices is designed for installation and use in industrial, electro-

magnetic environmental conditions.

• Theinstallationshouldbettedwithaswitchorcircuit-breakerlocated

near the device, easily accessible to the operator and with appropriate

marking.

4. INSTALLATION

4.1. Controller Installation

Attach the controller to the board with four screw mounts

in line with Fig. 1. The hole in the board should be 71+0.7 x 29+0.6 mm.

The board material may be up to 15 mm thick.

Fig. 1. Attaching the controller

Fig. 2. Controller dimensions.

The controller’s dimensions are shown on Fig. 2.

4.2. Electrical Connections

The controller has two disconnectable strips with screw terminals.

One strip allows for the connection of power supply and output

with a wire up to 2.5 mm2in size and the other strip for the connection

of input signals with a wire up to 1.5 mm2in size.

Fig. 3. View of the controller’s connection strips.

4.3. Installation recommendations

To obtain full resistance to electromagnetic interference,

observe the following rules:

•do not power the controller from the mains near equipment genera-

ting impulse interference and do not use common earthing circuits

for them,

• uselinelters,

•measuring signal input wires should be screened twisted pairs and

wires for resistance sensor in three-wire systems formed by screened

twisted wires with the same length, size and resistance,

•all the screens should be earthed or connected to a protective cable,

on one side, as close to the controller as possible,

•follow the general principle that wires which transmit different signals

should run as far from each other as possible (no less than 30 cm)

and bundles should cross each other at the angle of 90o.

PCE-PD14

5. Commencement of operation

Fig. 4. View of the controller’s front panel.

Description of the controller

Power on

Once powered on, the controller performs a display test, shows re01,

software version and then the measured value.

The display may show a sign message on irregularities (see Table no. 13).

The on-off control algorithm with hysteresis 2.0°C is factory set.

Change of the set point

To display the set point, press or , the dot for the last

digit lights up then. To change the set point, press again or

(Fig.5).Thedotashestosignalthestartofchange.Accept

the new set point with within 30 seconds from the last pressed

or ; otherwise the controller changes over to display

the measured value with the previously set-up set point.

PCE-RE01

Fig. 5. Changing the set point.

PCE-RE01

6. OPERATION

Fig. 6 shows the operation of the controller.

Fig. 6. Controller operation menu

Inhaltsverzeichnis

Andere PCE Instruments Temperaturregler Handbücher

PCE Instruments

PCE Instruments PCE-RE21R Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema

Opt Lasers

Opt Lasers TEC-8A-24V-PID-HC Bedienungsanleitung

Vaillant

Vaillant VR 92/3 Bedienungsanleitung