PCE Instruments PCE-CRC 10 Bedienungsanleitung

PCE-CRC 10 Adhesion Tester

User Manual

User manuals in various languages (Deutsch,

français, italiano, español, português, nederlands,

türk, polski, русский, 中文) can be downloaded here:

www.pce-instruments.com

Last change: 20 December 2016

v1.0

English

Contents

1Safety notes........................................................................................... 1

2Test procedure ......................................................................................2

3Analysis ................................................................................................. 3

4Warranty.................................................................................................4

5Disposal ................................................................................................. 4

1 Safety notes

Please read this manual carefully and completely before you use the device for the first time.

The device may only be used by qualified personnel and repaired by PCE Instruments

personnel. Damage or injuries caused by non-observance of the manual are excluded from our

liability and not covered by our warranty.

The device must only be used as described in this instruction manual. If used

otherwise, this can cause dangerous situations for the user and damage to the meter.

The device must only be used with accessories from PCE Instruments or equivalent.

Otherwise, PCE Instruments does not grant any warranty or assume any liability for

defects or damage.

Do not make any technical changes to the device.

Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

If you have any questions please contact PCE Instruments. The contact details can be found at

the end of this manual.

2 Test procedure

1. Place the cross-cut tester on the

test object, apply soft pressure and pull the

device towards yourself in even movements in

order to make parallel cuts with a length of

approx. 20 mm. Apply enough pressure to

make sure that you reach the next layer or

carrier material.

2. Place the cutting tool on the sample

at 90° to the first cut and repeat step 1 to

create a lattice pattern on the coating (Figure

1).

3. Use a brush to remove dirt from the

lattice and inspect to ensure the cuts have

penetrated all the way through the coating

(Figure 2).

4. Remove and discard two complete

turns of adhesive tape. Remove an additional

length of tape at a steady rate and cut a

piece approximately 75 mm from this length.

5. Place the turns in the middle of the

lattice and use a pencil eraser to straighten

the adhesive tape. (Image 3)

6. Remove the adhesive tape carefully

in a 180 ° angle. (Image 4)

7. Analysieren the result.

8. Repeat the test in two more

positions.

Note: If you would like more information on

this test method, please have a look at the

relevant standard (ISO/ASTM).

Figure 1

Figure 2

Figure 3

Figure 4

3 Analysis

Coating adhesion can be assessed by comparing the lattice of cuts with ASTM or Corporate

Standards. The ASTM standards are reproduced in the following table.

The edges of the cuts are completely

smooth; none of the squares of the

lattice is detached.

Detachment of flakes of the coating

at the intersections of the cuts. A

cross cut area not significantly

greater than 5% is affected.

The coating has flaked along the

edges and/or at the intersections of

the cuts. A cross cut area

significantly greater than 5%, but not

significantly

greater than 15% is affected.

The coating has flaked along the

edges of the cuts partly or wholly in

large ribbons, and/or it has flaked

partly or wholly on different parts of

the squares. A cross cut area

significantly greater than 15%, but

not

significantly greater than 35%, is

affected.

The coating has flaked along the

edges of the cuts in large ribbons

and/or some squares have detached

partly or wholly. A cross cut area

significantly greater than 35%, but

not significantly greater than 65%, is

affected.

Any degree of flaking that cannot be

classified even by classification 4

(1B).

4 Warranty

You can read our warranty terms in our General Business Terms which you can find here:

https://www.pce-instruments.com/english/terms.

5 Disposal

In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use

them or give them to a recycling company which disposes of the devices in line with law.

For countries outside the EU, batteries and devices should be disposed of in accordance with

your local waste regulations.

If you have any questions, please contact PCE Instruments.

PCE Instruments contact information

Germany France Spain

PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.

Im Langel 4 76, Rue de la Plaine des Bouchers Calle Mayor, 53

D-59872 Meschede 67100 Strasbourg 02500 Tobarra (Albacete)

Deutschland France España

Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel. : +34 967 543 548

Fax: +49 (0) 2903 976 99 29 Numéro de fax: +33 (0) 972 3537 18 Fax: +34 967 543 542

[email protected] [email protected] [email protected]

www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol

United States of America United Kingdom Italy

PCE Americas Inc. PCE Instruments UK Ltd PCE Italia s.r.l.

711 Commerce Way suite 8 Units 12/13 Southpoint Business Park Via Pesciatina 878 / B-Interno 6

Jupiter / Palm Beach Ensign Way, Southampton 55010 LOC. GRAGNANO

33458 FL Hampshire CAPANNORI (LUCCA)

USA United Kingdom, SO31 4RF Italia

Tel: +1 (561) 320-9162 Tel: +44 (0) 2380 98703 0 Telefono: +39 0583 975 114

Fax: +1 (561) 320-9176 Fax: +44 (0) 2380 98703 9 Fax: +39 0583 974 824

[email protected] [email protected] i[email protected]

www.pce-instruments.com/us www.pce-instruments.com/english www.pce-instruments.com/italiano

The Netherlands Chile Hong Kong

PCE Brookhuis B.V. PCE Instruments Chile SA PCE Instruments HK Ltd.

Institutenweg 15 RUT 76.423.459-6 Unit J, 21/F., COS Centre

7521 PH Enschede Calle Santos Dumont N° 738, Local 4 56 Tsun Yip Street

Nederland Comuna de Recoleta, Santiago, Chile Kwun Tong

Telefoon: +31 (0) 900 1200 003 Tel. : +56 2 24053238 Kowloon, Hong Kong

Fax: +31 53 430 36 46 Fax: +56 2 2873 3777 Tel: +852-301-84912

[email protected] [email protected] [email protected]

www.pce-instruments.com/dutch www.pce-instruments.com/chile www.pce-instruments.cn

China Turkey

Pingce (Shenzhen) Technology Ltd. PCE Teknik Cihazları Ltd.Şti.

West 5H1,5th Floor,1st Building Halkalı Merkez Mah.

Shenhua Industrial Park, Pehlivan Sok. No.6/C

Meihua Road,Futian District 34303 Küçükçekmece - İstanbul

Shenzhen City Türkiye

China Tel: 0212 471 11 47

Tel: +86 0755-32978297 Faks: 0212 705 53 93

[email protected] [email protected]

www.pce-instruments.cn www.pce-instruments.com/turkish

Inhaltsverzeichnis

Andere PCE Instruments Prüfgeräte Handbücher

PCE Instruments

PCE Instruments PCE-PWT 10 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-IT111 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-RT 1200 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-RT 2300 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VTS 50 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-WMM 50 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-900 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-MTS500 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-789 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-2500 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-EVSE 300 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-OM 15 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-SC 09 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-HT 224E Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VT 2700 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VE 5 Series Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-2500N Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VM 25 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-CT 65 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-RT 2200 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-830+PCE-6802 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-MCA 50 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-2000 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-UT81B Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung