Peco X20 Convertible Trailer Vac Bedienungsanleitung

OPERATOR’S MANUAL

COLLECTION SYSTEM

& UTILITY TRAILER

PECO

PECOPECO

PECO

PECOPECO

PECO

RRR

MANUAL PART#: Q0547 Release: Sept 2019

ASSEMBLY OPERATION MAINTENANCE

Model# 4920, 6930 & 7930

Briggs & Stratton 900 Series 6930

6.5 HP Briggs & Stratton Vanguard 7930

Briggs & Stratton 900 Series 4920

GRASS COLLECTION SYSTEM

TABLE OF CONTENTS

Preparation of Parts - - - - - - - - - - - - - - - - - - - - - - 6-7

Blower Cone Installation - - - - - - - - - - - - - - - - - - - 11

Safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

Wheel Installation - - - - - - - - - - - - - - - - - - - - - - 9-10

Removing Trailer Pan - - - - - - - - - - - - - - - - - - - - - 7

Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

I INTRODUCTION AND DESCRIPTION - - - - - - - - - - - - 5

Engine/Blower/Blade Assembly Installation - - - - - - - 11

Attaching Trailer to Trailer Pan - - - - - - - - - - - - - - - 8

II INSTALLATION FOR USE - - - - - - - - - - - - - - - - - - - - - 6

Upper Hose Installation - - - - - - - - - - - - - - - - - - - 12

Trailer Top Installation - - - - - - - - - - - - - - - - - - - - 10

SECTION PAGE

Safety Alert Symbols- - - - - - - - - - - - - - - - - - - - - - 3

Dump Handle Installation - - - - - - - - - - - - - - - - - - - 8-9

Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Wooden Support Removal - - - - - - - - - - - - - - - - - 7

Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

Removing Trailer from Pallet - - - - - - - - - - - - - - - - 8

Inlet Ring Installation - - - - - - - - - - - - - - - - - - - - - 11

Attaching Trailer to Tractor - - - - - - - - - - - - - - - - - 12

SECTION PAGE

Engine Stay Assembly Installation - - - - - - - - - - - - - 13

Universal Boot Installation - - - - - - - - - - - - - - - - 18-20

Lower Hose Installation - - - - - - - - - - - - - - - - - - - 20

Impeller Blade Removal/Replacement - - - - - - - - - - 21

Exploded Views & Parts List - - - - - - - - - - - - - - 22-37

Engine Stay Adjustments - - - - - - - - - - - - - - - - 14-17

Overall Parts List - - - - - - - - - - - - - - - - - - - - - - 38-40

Safety Decals - - - - - - - - - - - - - - - - - - - - - - - - - - 41

III OPERATING INSTRUCTIONS - - - - - - - - - - - - - - - - - - 42

General Safety - - - - - - - - - - - - - - - - - - - - - - - - - 42

Disengagement Of The PTO Assembly- - - - - - - - - - 42

Unloading The Collection System - - - - - - - - - - - - - 42

IV MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - - - 42

Lubrication - - - - - - - - - - - - - - - - - - - - - - - - - - - - 42

Operation & Tips On Mowing - - - - - - - - - - - - - - - - 42

Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - 45

Parts And Service Information- - - - - - - - - - - - - - - - 43

Torque Specifications - - - - - - - - - - - - - - - - - - - - - 44

V PARTS AND SERVICE - - - - - - - - - - - - - - - - - - - - - - - 43

Maintenance Checklist - - - - - - - - - - - - - - - - - - - - 42

SAFETY

anyone who is not acquainted with the Safety Instructions to use your attachment.

when the container is empty.

you.

6. Do not attempt to operate your machine when not in the driver’s seat.

2. Know the controls and how to stop them quickly. READ THE OPERATOR’S MANUAL!

3. Do not allow children to operate the machine. Do not allow adults to operate it without proper instruction.

4. Be especially watchful of children and pets entering into the area while operating.

1. Read the operator’s manual carefully and familiarize yourself with the proper use of your attachment. Do not allow

7. Always shut off blades and engine when emptying the container.

5. Keep your eyes and mind on your machine while mowing or operating your attachment. Don’t let others distract

removing clogs, removing or replacing hose, boot, blower cone, or performing any maintenance.

9. Mow across the face of slopes (not more than 10 degrees); never up and down the face.

8. Stop machine, shut off deck attachment, set parking brake, shut off engine and remove ignition key before

10. It is recommended that the container be emptied when half full while operating on slopes. Start mowing on slopes

12. Wear hearing protection.

foreign object.

11. Inspect your lawn and remove any foreign objects before mowing. Never deliberately run the mower across any

13. Wear eye protection to prevent debris from getting into your eyes.

2017 (v1.0)

SAFETY

Should be followed by the operator to avoid accidents. When

and heed its advice. Failure to comply with safety precautions

Safety Signs

WARNING! NEVER operate the mower unless the discharge guard and either the deflector assembly or

the vacuum collector adapter are fastened securely in place.

WARNING! To avoid serious injury, perform maintenance on the vacuum collector; ONLY AFTER

STOPPING THE MOWER’S ENGINE AND WAITING FOR ALL MOVING PARTS TO COME TO A

COMPLETE STOP. Set the parking brake. Always remove the ignition key before beginning maintenance.

WARNING! For your own personal safety, ALWAYS mow ACROSS the face of slopes and

NEVER UP and DOWN the face. NEVER attempt to mow excessively steep slopes, and use

caution when turning on any slope.

The signal words DANGER, WARNING, and CAUTION are used on the equipment safety signs. These words

are intended to alert the viewer to the existence and the degree of hazard seriousness.

This Safety Alert Symbol means: “ATTENTION! BECOME

WARNING! Do not work around the mower deck boot or the blower area until you are certain that the mower

blades and the blower impeller have stopped rotating.

could result in death or serious bodily injury.

you see this symbol, carefully read the message that follows

This symbol is used to call attention to safety precautions that

Safety Alert Symbol

ALERT! YOUR SAFETY IS INVOLVED!”

DANGER

CAUTION

This signal word indicates a potentially hazardous situation which, if not

avoided, will result in death or serious injury.

This signal word indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

It may also be used to alert against unsafe practices.

This signal word indicates a potentially hazardous situation which, if not

avoided, will result in minor or moderate injury.

It may also be used to alert against unsafe practices.

White letters on RED

Black letters on ORANGE

Black letters on YELLOW

WARNING

2017 (v1.0)

from the date of delivery of the product to the original purchaser when used for in commercial applications.

Products designated as 'Residential' are warrantied for 90 days from the date of delivery of the product to the

original purchaser when in commercial applications.

1. PRODUCT WARRANTY: Any part of any consumer product, which is defective in material or

workmanship as delivered to the purchaser will be repaired or replaced, as PECO elects, without charge for

parts or labor, if the defect appears within 12 months from the date of delivery of the product to the original

purchaser. ALL DEFECTIVE PARTS MUST BE RETURNED TO PECO FOR INSPECTION TO DETERMINE

VALIDITY OF WARRANTY CLAIMS. Freight and mailing will be borne by the customer.

A. WHAT IS UNDER WARRANTY?

PECO LIMITED WARRANTY FOR NEW PRODUCTS

2. PARTS REPLACED DURING WARRANTY: Any new PECO part which is furnished in performance of

this warranty and is defective in material or workmanship as delivered to the purchaser will be repaired or

replaced, before the expiration of the original warranty period, whichever is later.

PECO extends the following warranties to the original purchaser of each new PECO consumer product subject

to the following limitations.

Engines and batteries attached to PECO products are covered under a separate warranty by the respective

manufacturer.

E. ACCIDENTS AND NORMAL MAINTENANCE

Call PECO for Return Authorization. Damaged or broken parts other than engines or batteries, must be

returned to New PECO, Inc. at 10 Walden Drive, Arden, NC 28704 before any warranty adjustment can be

authorized. At the time of requesting warranty adjustment, the purchaser must present evidence of the date of

delivery of the product. The purchaser shall pay any charge for the product to and from Arden, NC.

Neither New PECO, Inc. nor any company affiliated with it makes any warranties, representations or promises

as to the quality of performance of its products other than those set forth herein. Except as described above,

New PECO, Inc. makes no other warranties AND SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED

WARRANTIES OF FITNESS AND MERCHANTABILITY.

3. COMMERCIAL USE: Products put to personal use around a single household or residence is considered

'Residential'; Products put to any business use (agricultural, commercial, or industrial) or used at multiple

locations is considered 'Commercial.' Products designated as 'Commercial' are warrantied for 12 months

G. PRODUCTS USED FOR RENTAL OR LEASE PURPOSES ARE WARRANTIED FOR 45 DAYS

FROM DATE OF ORIGINAL SALE ONLY

The only remedies the purchaser has in connection with the breach or performance of any warranty on New

PECO, Inc. consumer products are set forth above. In no event will PECO be liable for special incidental or

consequential damages.

H. REMEDIED EXCLUSIVE

1. NO SERVICE CENTER WARRANTY

C. ITEMS NOT COVERED BY PECO WARRANTY

D. UNAPPROVED ALTERATION OR MODIFICATION

F. NO REPRESENTATIONS ADDITIONAL WARRANTIES, DISCLAIMER

The selling Service Center makes no warranty on his own on any item warranted by New PECO, Inc. unless he

delivers to purchaser a separate written warranty certificate specifically warranting the item. The dealer has no

authority to make any representation or promise on behalf of PECO or to modify the terms of this warranty in

any way.

B. SECURING WARRANTY ADJUSTMENTS

All obligations of New PECO, Inc. under this warranty shall be terminated if products are altered or modified in

ways not approved by New PECO, Inc.

The warranty covers only defective material and workmanship. It does not cover depreciation or damage

caused by normal wear, accident, improper use or abuse of products. The cost of normal maintenance and

normal replacement of service items such as belts, cutting blades, hoses, etc., which are not defective shall be

paid for by the purchaser.

2017 (v1.0)

Introduction

We are pleased to have you as a PECO customer. Your

collection system has been designed to give you a low

maintenance, simple, and effective way to collect the

grass clippings from your mower. The manuals are

provided to give you the necessary instructions to

properly mount, operate and maintain the collection

system on your mower. Please read this manual

thoroughly. Understand what each control is for and how

to use it. Observe all safety decal precautions on the

machine and noted throughout the manual.

NOTE: All references made to right, left, front, rear, top

or bottom are as viewed from the normal operator’s

position on the mower.

Description

The grass collection system is designed for turf

maintenance where there is a need to collect the grass

clippings as the mower cuts the turf. It is also used for

picking up leaves in pre-season and post-season clean-

up. The engine/blower/blade assembly, is mounted on

the right side of the unit. The blower draws grass

clippings from the discharge area up and back to the

container mounted to the rear of the mower. The

operator can engage the engine/blower/blade assembly

by starting the engine. Once the container is full of

clippings, the operator can remove the rear door and

then easily pull and lift the handle to dump.

Section I - INTRODUCTION AND DESCRIPTION

Note: The following instructions are used in the

Preparation Of Parts

installation of both the X20 Trailer Vac & X30 Trailer Vac.

PECO Trailer Vacs are shipped as shown in Figure A.

Section II - INSTALLATION FOR USE

Remove the door as shown in Figure C. Rotate the red

reflectors to release the door. Then lift up and out.

Remove the shrink wrap as shown in Figure B.

Shipping Crate

Cut and Remove

Shrink Wrap

Rotate

Reflectors

Figure A

Figure B

Figure C

Remove the hoses as shown in Figure D.

Release the (2) rubber straps (PER SIDE) as shown in

Figure E.

Remove the lightweight top as shown in Figure F.

Release

Rubber Straps

Figure D

Figure E

Figure F

Remove all parts from trailer pan as shown in Figure G.

Cut and remove the (2) retaining wires from the trailer

pan. Refer to Figure B.

Remove the (2) shipping screws from the front trailer

pan as shown in Figure A.

Removing Trailer Pan

Remove (2)

Shipping Screws

Cut (2)

Retaining Wire

Figure G

Figure A

Figure B

Lift the trailer pan off of the chassis and set the trailer

pan upside down as shown in Figure D.

Wooden Support Removal

Using a hammer or pry bar, carefully remove the wooden

supports from the shipping crate. The support consists of

(3) pieces. (2) support legs and (1) top support. Refer to

Figure A.

Using a hammer or pry bar, carefully loosen the top

support and remaining support leg. Refer to Figure B.

Set Trailer Pan

Upside Down

In Preparation

Loosen

Support Leg

Figure D

Figure A

Loosen

Support Top

Figure B

Removing Trailer From Pallet

Cut and remove the remaining retaining wires as shown

in Figure A. Then lift and remove the trailer from the

shipping crate as shown in Figure B.

With the trailer upright on the ground, remove the

cardboard from the trailer as shown in Figure C.

NOTE: Do not remove the engine mount arm zip tie.

Cut and Remove

Shipping Wire

Remove Trailer

Figure A

Figure B

Attaching Trailer to Trailer Pan

Flip the trailer over and place on the trailer pan as shown

in Figure A.

Attach the trailer to the trailer pan using (2) clevis pins

P#(K0082) and (2) hair pin clip P#(K0086). Refer to

Figure B.

Remove Cardboard

Place Trailer On

The Trailer Pan

Secure Using

(2) Clevis Pins and

(2) Hair Pin Clips

Figure C

Figure A

Figure B

Dump Handle Installation

Remove the existing 3/8” nut from the pivot bolt as

shown in Figure A.

Pivot Bolt

3/8”-16

Nut

Figure A

Note: The Dump Handle contains 2 holes that are

specific to the type of Trailer Vac it is being installed on.

The First hole is for the X30 Trailer Vac and the Second

hole is for the X20 Trailer Vac.

Insert the dump handle through the slot in the trailer pan

and through the handle spring P#(J0310) as shown in

Figure B.

Insert the pivot bolt through the hole corresponding with

your Trailer Vac in the dump handle. Secure the handle

to the pivot bolt using the 3/8”-16 Nut that was removed.

Attach the hook end of the spring to the hole in the trailer

pan. Refer to Figure C.

Insert the Handle Grip P#(J0522) onto the end of the

dump handle as shown in Figure D.

Dump Handle

Handle

Spring

Figure B

Attach Spring To

Trailer Pan

3/8”-16 Nut

Handle Grip

Figure C

Figure D

Wheel Installation

Remove the tape from both axles. Refer to Figure A and

Figure B for reference.

Insert the wheels onto the wheel axle as shown in Figure

C. Secure each wheel using (1) 3/4” flat washer

P#(K0061) and (1) 1/8”-1/2” cotter pin P#(K0085). Refer

to Figure C and D.

Remove Tape

From Axle

Tape Removed

From Axle

Insert Wheel

Onto Axle

Figure A

Figure B

Figure C

Flip the trailer over onto the wheels in preparation for the

trailer top installation. Refer to Figure E.

NOTE: It is recommended that someone assist you

during this step.

(1) Flat Washer

(1) Cotter Pin

PER WHEEL

Trailer Top Installation

Lift the trailer top and place onto the trailer pan as shown

in Figure A.

Secure the trailer top to the trailer pan with the (4) rubber

straps. Refer to Figure B.

Attach the trailer door to the assembly. Secure the door

by rotating the (2) red reflectors on the trailer top. Refer

to Figure C.

Place Trailer Top

Onto The Trailer Pan

Rubber Straps

Rotate

Reflectors

Figure A

Figure B

Figure C

Figure D

Figure E

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Peco Nutzfahrzeug Handbücher

Peco

Peco 5920E Bedienungsanleitung

Peco

Peco 5920 Bedienungsanleitung

Beliebte Nutzfahrzeug Handbücher anderer Marken

Polaris

Polaris ACE 900 SP Bedienungsanleitung

TrailMax

TrailMax T-12-UR Bedienungsanleitung

Floe

Floe Cargo Max 9.5-73 Bedienungsanleitung

Toro

Toro 07277 Workman 2110 Bedienungsanleitung

Taylor-Dunn

Taylor-Dunn B0-050-00 Handbuch

Toro

Toro 133-7128 Bedienungsanleitung

Taylor-Dunn

Taylor-Dunn ET 3000 Bedienungsanleitung

Kayo

Kayo S70 Bedienungsanleitung

Range Road

Range Road RR608 Bedienungsanleitung

Landoll

Landoll 900D Series Bedienungsanleitung

SSI SCHAEFER

SSI SCHAEFER WEASEL LITE Bedienungsanleitung

Club Car

Club Car TURF 272 2005 Handbuch

pronovost

pronovost PUMA-10000 Bedienungsanleitung

Toro

Toro 07059TC Bedienungsanleitung

Cushman

Cushman Turf Truckster 84069 Bedienungsanleitung

BERG

BERG Large Trailer Bedienungsanleitung

Cub Cadet

Cub Cadet Big Country 641 Bedienungsanleitung

Westward

Westward Go-4 XTR Bedienungsanleitung