Peerless-AV IRTO55-XHB4 Gebrauchs- und Pflegehandbuch

IRTO55-XHB4

IR Touch Overlay for Xtreme XHB554-EUK display

Calibration & Orientation

Prerequisite Software:Expert Calibration Tool; Rotating Orientation Tool

Calibration:- https://tsitouch.com/knowledge-base/touch-expert-irt-calibration-in-windows

Rotation:- https://tsitouch.com/knowledge-base/touch-expert-irt-rotating-orientation-in-windows

The following steps must be done in a Windows environment, even if your touch screen is being used with

a different operating system. Touch Service needs to be installed before using the Touch Rotation Tool.

*If Calibration is needed, it must be done in Landscape Orientation and before the Rotation Tool is

used*

Calibration in Windows

Applies to: Touch Expert/IRT Touch Frames

Symptom(s): Misaligned Calibration, Flipped Orientation

Affected OS: Windows 10

Prerequisite Software:Expert Calibration Tool; Rotating Orientation Tool

The following steps must be done in a Windows environment, even if your touch screen is being used with

a different operating system. After connecting the touch screen USB to a Windows device, follow the steps

below.

1. Download the Touch Service Utility from the link above.

2. Open the below file.

3. Double click the Setup application.

4. To install the Touch Service application, click Next and then click Install.

5. To complete the installation, click Finish.

6. Once installation is complete, open the Touch Service application located on your desktop.

7. This will bring you to the main menu. Make sure that the touch screen USB is connected to your device.

If it is connected correctly, it will state "Already link equipment". Should the device not be correctly

installed, it will state "Have not linked equipment". In order to disable right click, the touch screen must

be properly connected.

NOTE: If the issue is Flipped Orientation, the Operating System Display Settings must be set to Landscape

8. To calibrate your touch screen, click on the Calibration button. Cross-hairs will appear on the

display. Touch the centre of each cross-hair as they appear.

9. After calibration is completed, you will be prompted to save the changes. Click Yes to save the

calibration or No if you wish to re-calibrate. If there was an error while calibrating, an error will

appear asking to either save the calibration or reset. It is recommended that you calibrate the touch

screen again to ensure accuracy.

10. Disconnect the USB cable from the Windows device and reconnect to the intended device. Touch

should now function as expected in the new operating system.

11. If performing Calibration does not resolve Flipped Orientation issue, the Touch Rotation Tool

will need to be used. See following pages for the Rotation Tool

12. If the above steps do not resolve the issue, please contact the TSI Touch Customer Service team

at 802-874-0123 Option 2; email: support@tsitouch.com; or by visiting our TSI Touch website and

clicking on the red “Help” icon in the lower right corner of the webpage.

Rotating Orientation in Windows

Applies to: Touch Expert/IRT Touch Frames

Symptom(s): Touch Orientation off by 90 Degree Increment

Affected OS: Windows 10

Prerequisite Software: Expert Calibration Tool; Rotating Orientation Tool

The following steps must be done in a Windows environment, even if your touch screen is being used with

a different operating system. Touch Service needs to be installed before using the Touch Rotation Tool.

Follow this guide's previous steps to install Touch Service.

*If Calibration is needed, it must be done in Landscape Orientation before the Rotation Tool is used*

1. Download the Rotation Tool Utility from the link

2. Extract all Files to the desired location on your PC.

3. Open the TouchRotate.exe file.

Note: There is a possibility of being prompted by Microsoft Defender SmartScreen with the following

message. If so, select More Info, then Select Run anyway.

4. This will bring you to the Touch Rotation Tool. If the Touch Expert Frame is detected, options to

Adjust System or Touch will be selectable. If the Frame is not detected, this interface will be greyed out.

5. To Rotate Touch to the proper Orientation select the Drop Down menu for System. This will give you

four options for Degrees of Rotation, 0, 90, 180, and 270 Degrees.

Note: Rotating Orientation must be done from System Drop Down Menu. The Touch Drop Menu will

have no affect on Orientation.

6. When placing a Touch Expert (TE) IPxx rated IR touch frame in portrait in any type of outdoor

configuration, (e.g. kiosk or enclosure), the rotation of the touch frame needs to be 90-degree counter-

clockwise. The USB cable will end up in the lower right corner.

Note: This is the same as 270 degrees clockwise for purposes of the TE Rotation software if needed to

assist with rotation of the touch orientation.

7. Depending on the Degree of Rotation needed, select that option and press Save. If Rotation is

successful, Succeeded will be posted under Result

Ex. of 180 Degree Rotation:

Beliebte Industriemonitor Handbücher anderer Marken

JUMO

JUMO mTRON T Bedienungsanleitung

SWEDX

SWEDX SWSS156 Bedienungsanleitung

Saia

Saia PCD7.D410VTCF Bedienungsanleitung

weintek

weintek EasyView MT-608S Bedienungsanleitung

Advantech

Advantech FPM-212 Series Bedienungsanleitung

Advantech

Advantech FPM-3191G Series Bedienungsanleitung

Austin Hughes

Austin Hughes RP-F821 Bedienungsanleitung

WAGO

WAGO WAGO-PERSPECTO 762 Series Produkthandbuch

HIS

HIS HIS-ML12-Series D Bedienungsanleitung

Advantech

Advantech IDS-3319 Series Bedienungsanleitung

Acnodes

Acnodes APH 8064 Bedienungsanleitung

Acnodes

Acnodes APW 5400 Bedienungsanleitung

Dynamic Displays

Dynamic Displays QES1500 Progressive Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK Dk3g4PANEL 6153-O/P Bedienungsanleitung

ESA

ESA XM7W7 Bedienungsanleitung

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Bedienungsanleitung

Siemens

Siemens INOX PRO SIMATIC IFP1900 Administratorhandbuch

Advantech

Advantech IDK-1115WP-45FHA1 Bedienungsanleitung

peerless-AV IRTO55-XHB4 Gebrauchs- und Pflegehandbuch

Beliebte Industriemonitor Handbücher anderer Marken