Peerless-AV ACC 845 Leitfaden

ISSUED:12-18-01 SHEET#: 055-9070-3 11-10-04

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 4

IMPORTANT! Read entire instruction sheet

before you start installation and assembly.

Installation andAssembly - VibrationAbsorber Ceiling Mount for Unistrut®Model:

ACC845

Description

Aanti- vibration mount

Brubber bumper

Cplastic finishing caps

Dadapter bracket for unistrut

E5/16-18 x 1.25 socket bolt

Frubber grommet

GM5 x .8 x 10 mm socket-pin screw

HM5 x .8 x 10 mm phillips screw

Ispring nut

Parts List Qty.

Part Number

055-0004

590-1124

590-1123

055-1175

520-1104

530-9401

520-1063

520-9250

560-2101

Note: Actual parts may appear slightly different than illustrated.

Before you start check the parts list below to

make sure all of the parts shown are included.

• Installer must verify that the ceiling will safely support

fourtimes the combinedweight ofall attachedequip-

mentandhardware.

WARNING

• If mounting to wood, purchase modelACC 840. ModelACC 845 should be mounted to Unistrut®only. Ifthe anti-

vibration mount is altered in any way it may not be as effective, or effective at all, in controlling vibration. In

addition, be certain that no part of the system, including any extension column that might be used, comes in

contact with the vibrating surface. If mounting through a drop ceiling, be sure to cut a large enough hole in the

ceiling tile as to avoid contact with the extension column. If using an escutcheon ring, be sure it does not come

in contact with the false ceiling.Also be sure to use the rubber bumpers (B) provided.

WARNING

ISSUED:12-18-01 SHEET#: 055-9070-3 11-10-04

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 4

Unistrut®

Track

Insert two spring nuts (I) into Unistrut®track as shown.

Attachfour rubberbumpers (B)toanti-vibration mount(A) asshownbelow.

ISSUED:12-18-01 SHEET#: 055-9070-3 11-10-04

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

3 of 4

Unistrut®

Track

Place adapter brackets (D) on top of rubber bumper (B) then fasten to spring nuts (I) inside Unistrut®track using

two 5/16-18 socket bolts (E). Note: Make sure rubber bumpers (B) are firmly in place before attaching to ceiling.

Whenattaching anti-vibration mount(A) toflush mounttube orextension column(both tubeandcolumn aresold

separately ), tighten at least four complete turns ending with one of the small threaded holes aligned with slot in

the end of flush mount tube or extension column. Insert and tighten one M5 screw (H)to lock tube position

(shown below on right side). Note: For security the M5 philips screw (H) can be replaced with M5 socket-

pinscrews(G).

flush mount tube or

extension column

(sold sparately)

• Tighten socket bolts so that anti-vibration mount is

firmlyattached, butdo notovertighten.Overtightening

candamage the bolts,greatly reducingtheir holding

poweranddecrease theanti-vibrationaleffectiveness!

• Tighten to 30-40 in • lb (3.4 - 4.5 N.M.) maximum

torque.

WARNING

ISSUED:12-18-01 SHEET#: 055-9070-3 11-10-04

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

4 of 4

Placeonefinishing cap (C)on each endof

anti-vibrationmount(A). OPTIONAL: Place grommet(F)onanti-vibration

mount (A)and place onefinishing cap (C)on other

endof anti-vibrationmount (A).Routecordsthrough

extensioncolumnand out cordmanagement holes

inanti-vibration mount(A).

Note: If using Vector Pro projector mounts, you

will need accessory ACC 800 to route cords

through column.

PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.

Unistrut®isaregistered trademarkof Peerless Industries,Inc.

Andere Handbücher für ACC 845

Inhaltsverzeichnis

Andere peerless-AV Projektorzubehör Handbücher

peerless-AV

peerless-AV ACC-V900X Bedienungsanleitung

peerless-AV

peerless-AV PRGS-455 Bedienungsanleitung

peerless-AV

peerless-AV PJR250 Bedienungsanleitung

peerless-AV

peerless-AV ACC560 Bedienungsanleitung

peerless-AV

peerless-AV PJR125 Bedienungsanleitung

peerless-AV

peerless-AV PLCM-UNL Bedienungsanleitung

peerless-AV

peerless-AV PSTA-028-W Leitfaden

peerless-AV

peerless-AV ACC 912 Leitfaden

peerless-AV

peerless-AV PRS Series Leitfaden

peerless-AV

peerless-AV PRG-1 Leitfaden

peerless-AV

peerless-AV PPF Bedienungsanleitung

peerless-AV

peerless-AV PRG-1S Leitfaden

peerless-AV

peerless-AV PRG-EXA Leitfaden

peerless-AV

peerless-AV PSTA-028 Leitfaden

peerless-AV

peerless-AV PeerAir WL-PRG-UNV-100 Bedienungsanleitung

peerless-AV

peerless-AV ACC560S Bedienungsanleitung

peerless-AV

peerless-AV ACC978 Bedienungsanleitung

peerless-AV

peerless-AV Modular Series Bedienungsanleitung

peerless-AV

peerless-AV ACC810 Bedienungsanleitung

peerless-AV

peerless-AV PSTA-028 Leitfaden

peerless-AV

peerless-AV PRSS-455 Gebrauchsanweisung

Beliebte Projektorzubehör Handbücher anderer Marken

Optoma

Optoma BX-AL133B Bedienungsanleitung

PEERLESS

PEERLESS PE 1120 Leitfaden

Osram

Osram SIRIUS HRI Series Handbuch

Presentation Switchers

Presentation Switchers PS111 Bedienungsanleitung

Kramer

Kramer VIA GO Bedienungsanleitung

Yamaha

Yamaha PJL-112 Stücklistenhandbuch

Mitsubishi Electric

Mitsubishi Electric 236CB Betriebsanleitung

Epson

Epson BrightLink 475Wi Bedienungsanleitung

Acer

Acer WP100 Bedienungsanleitung

i3 i3board Bedienungsanleitung

CHIEF

CHIEF HB-43E Bedienungsanleitung

Biamp

Biamp Modena Hub Service-Handbuch

NEC

NEC MP10RX Bedienungsanleitung

Panamorph

Panamorph DCR-S3 Bedienungsanleitung

Exact solutions

Exact solutions FRAME-EVO-P10 Bedienungsanleitung

CHIEF

CHIEF VCM103S Bedienungsanleitung

InFocus

InFocus LP70+ Leitfaden

Sharp

Sharp AN-PH20EZ Bedienungsanleitung

peerless-AV ACC 845 Leitfaden

Beliebte Projektorzubehör Handbücher anderer Marken