Peerless-AV HLG440-PH Leitfaden

1 of 4 ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11

Model: HLG440-PH, HLG440-PH-Q10

Installation and Assembly:

Desktop Swivel Mount for Philips 32HFL2082 and 40HFL2082 Displays

B C

D E

NOTE: Read entire instruction sheet before you start installation and assembly.

Before you start make sure all parts listed are included with your product.

H I

Mounting to Desktop Surface

Mounting using Bolt Down Method

HLG440-PH HLG440-PH-Q10

Description Qty Part # Qty Part #

swivel plate assembly 1 090-1983 10 090-1983

B10-32 x 3/8 flat head self drilling screw 3 560-2743 30 560-2743

C1/4-20 x 1-3/4" thin head carriage bolt 2 560-1764 20 560-1764

D1/4-20 slope nut 3 530-0035 23 530-0035

Eplastic cap 2 590-1294 20 590-1294

F4 mm allen wrench 1 560-9646 3 560-9646

GM5 x 20 mm socket pin screw 2 520-1065 20 520-1065

H#10 split lock washer 2 540-1035 20 540-1035

I#10 flat washer 2 540-9400 20 540-9400

Parts List

2 of 4 ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11

LEFT SIDE

Use swivel plate assembly (A) as a template to mark location of holes, point 1 and point 2, approximately 3" apart

on table. Drill two holes using a 1/4'' drill bit.

Place two 1/4-20 x 1-3/4" thin head carriage bolts (C) into slots of swivel plate assembly (A).

POINT 1 POINT 2

TABLE TOP

Choose swivel range below and identify swivel range holes of swivel plate assembly (A).

SWIVEL RANGE HOLE

Mounting using Bolt Down Method

90°

60°

90°

30° 30°

FRONT

(76 mm)

USE HOLES TO LOCK SWIVEL

PLATE ASSEMBLY 90° FROM

CENTER

RIGHT SIDE

3 of 4 ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11

Hand tighten slope nut (D) through 1/4-20 x 1-3/4" thin head carriage bolt (C) until snug against bottom of desktop

surface. Thread another slope nut (D) upside-down, about two turns from rst slope nut (D). Insert an open box

wrench between both slope nuts (D) and tighten. NOTE: Avoid jamming both slope nuts (D) together, doing so

may make it difcult to remove slope nut used for tightening rst slope nut (D) as shown in g 4.1. After slope nut is

secure remove bottom slope nut and add plastic cap (E) as shown in gure 4.2. Repeat with remaining

1/4-20 x 1-3/4" thin head carriage bolt (C).

Detail 1

TIGHTENING

SLOPE NUT

32" Display Base Attachment Location

(note orientation of plate to base)

BOTTOM OF DESKTOP

FIG 4.1 FIG 4.2

Secure swivel plate assembly (A) to bottom of display base using three 10-32 x 3/8" at head self drilling screws (B)

in 32" or 42" orientation.

NOTE: Make sure that screws in display base align with slots and holes in swivel plate assembly (A)

as shown below.

FRONT

NOTE: Do not overtighten slope nut (D)

plate may distort

42" Display Base Attachment Location

(note orientation of plate to base)

ARROW INDICATES FRONT OF SWIVEL

PLATE ASSEMBLY

.88"

FRONT

DISPLAY

BASE SCREWS

DISPLAY

BASE SCREWS

4 of 4 ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11

DISPLAY

DISPLAY BASE

NOTE: Display and base may appear

different than illustrated

Installation of Security Screws for Base to Display Attachment

32" Display Base (No Screws Required)

Attach display to base using hardware provided with display using the manufactures installation manual.

42" Display Base

Attach display to base using two M5 x 20 mm socket pin screws (G), two #10 split lock washers (H), and two

#10 at washers (I) into bottom holes as shown below. Tighten with 4 mm security allen wrench (F).

Use screws supplied with display for remaining holes.

All other brand and product names are trademarks or registered trademarks of their respective owners.

42" Display Base Attachment Location

(note orientation of screws)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere peerless-AV TV-Halterung Handbücher

peerless-AV

peerless-AV PFLP650 Bedienungsanleitung

peerless-AV

peerless-AV YBTMU Bedienungsanleitung

peerless-AV

peerless-AV DS508 Leitfaden

peerless-AV

peerless-AV PTL635 Bedienungsanleitung

peerless-AV

peerless-AV PA750 Bedienungsanleitung

peerless-AV

peerless-AV ACC953 Leitfaden

peerless-AV

peerless-AV DS-S560-1X3 Bedienungsanleitung

peerless-AV

peerless-AV PLA50-UNL Leitfaden

peerless-AV

peerless-AV SMARTMOUNT LT TV-MT-SFL637 Bedienungsanleitung

peerless-AV

peerless-AV IWB680-W Bedienungsanleitung

peerless-AV

peerless-AV LCZ-4F4G30B Leitfaden

peerless-AV

peerless-AV SR575M Bedienungsanleitung

peerless-AV

peerless-AV KIP740 Bedienungsanleitung

peerless-AV

peerless-AV SmartMount ST632P Leitfaden

peerless-AV

peerless-AV SC560DPB Leitfaden

peerless-AV

peerless-AV CM850 Leitfaden

peerless-AV

peerless-AV WL-ST660-200 Bedienungsanleitung

peerless-AV

peerless-AV SmartMount SP735P-S Leitfaden

peerless-AV

peerless-AV ESA763PU Leitfaden

peerless-AV

peerless-AV PF660 Bedienungsanleitung

peerless-AV

peerless-AV FPZ-655 Leitfaden

peerless-AV

peerless-AV YBTLU Bedienungsanleitung

peerless-AV

peerless-AV ACC-V1500X Bedienungsanleitung

peerless-AV

peerless-AV DS-S555-3X2 Bedienungsanleitung

Beliebte TV-Halterung Handbücher anderer Marken

Ergotron

Ergotron Neo Flex Cantilever UHD Bedienungsanleitung

StarTech.com

StarTech.com FPCEILBTB Bedienungsanleitung

VonHaus

VonHaus 05/038 Bedienungsanleitung

Techlink

Techlink ECHO TV Bedienungsanleitung

Sandstrom

Sandstrom SSTVMC12X Bedienungsanleitung

Sony

Sony SU-WL700 Leitfaden

ICW

ICW SCACC18 Bedienungsanleitung

LG WM-L640V Bedienungsanleitung

Gembird

Gembird WM-65ST-01 Bedienungsanleitung

ERARD

ERARD FiTUP XXL 035320 Bedienungsanleitung

PEERLESS

PEERLESS PLCK-1 Leitfaden

Kanto

Kanto RCF180 Bedienungsanleitung

GEM

GEM GEM GP001 Bedienungsanleitung

Gladiator Joe

Gladiator Joe GJ0A0053 Bedienungsanleitung

Vivotek

Vivotek AM-105 Bedienungsanleitung

Vivo

Vivo VESA STAND-VAD1B Bedienungsanleitung

AmazonBasics

AmazonBasics B07QG3LMG4 Bedienungsanleitung

Secura

Secura QLF210 Bedienungsanleitung

peerless-AV HLG440-PH Leitfaden

Beliebte TV-Halterung Handbücher anderer Marken