PEERLESS Jumbo 2000 JM 2630S Leitfaden

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

Installation and

Assembly -

Jumbo 2000®

Models: JM 2630S, JM 2640S, JM 2640DS, JM 2650S,

JM 2650DS, JM 2655S, JM 2660S, JM 2665S,

JM 2670S, JM 2675S

Please read this information first

Read entire instruction sheet before beginning

assembly and installation.

Check parts on parts listing before beginning

assembly.

Many accessories are available for this product.

Please contact customer service or visit website for

more information.

The retainer bar (D) in step 4 must be placed with

extruded side towards the anti rollout hook (C).

Pay close attention to the assembly of the threaded

flush mount tube (N) in step 6. The retaining collar

(K) threads up into the horizontal support (G). The

set screw (W) is then installed from the inside of

that collar into the notch in the tube. Refer to

drawings for correct placement.

The placement of set screw (W) in detail 3 of step 6

is essential to the safety of the installation.

This product is intended for use with UL Listed

products and must be installed by a qualified

professional installer.

Model #

JM 2630S

JM 2640S,

JM 2640DS

JM 2650S,

JM 2650DS,

JM 2655S

JM 2660S,

JM 2665S

JM 2670S,

JM 2675S

27"

35"

40"

Product is UL rated up to ___ TV

sizes, per attached chart

TV size

17"

21"

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

QTY.

PARTS LIST

JM 2630S

128-4023

128-4024

128-4128

128-4107

128-4116

128-4117

128-4105

570-2024

128-4016

128-4340

128-4339

540-9432

1800-375S

540-9431

128-4067

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2650S

128-4023

128-4024

128-4130

128-4111

128-4116

128-4117

128-4105

570-2024

128-4018

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2650DS

128-4026

128-4027

128-4135

128-4111

128-4116

128-4117

128-4105

570-2024

128-4018

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2655S

128-4026

128-4027

128-4135

128-4109

128-4116

128-4117

128-4105

570-2024

128-4018

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2660S

128-4026

128-4027

128-4136

128-4113

128-4116

128-4117

128-4105

570-2024

128-4019

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2665S

128-4026

128-4027

128-4136

128-4111

128-4116

128-4117

128-4105

570-2024

128-4019

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2670S

128-4026

128-4027

128-4137

128-4115

128-4116

128-4117

128-4105

570-2024

128-4020

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2675S

128-4026

128-4027

128-4137

128-4113

128-4116

128-4117

128-4105

570-2024

128-4020

128-4335

128-4334

540-9432

1800-375S

540-9431

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

support tray left

support tray right

support tray center

vertical support arm

anti-rollout hook

retainer bar

top clamp

adhesive pad

horizontal support

tilt bracket right

tilt bracket left

fiber washer - large inside dia.

retaining collar

fiber washer - small inside dia.

spacer (only 2630-2640D models)

flush mount tube

5/16 - 18 x 1/2" carriage bolt

5/16 washer/nut combo

M10-1.5 x .7 flange nut

M6 x 18 mm flat phillips screw

M10-1.5 x 16 mm socket screw/washer combo

M10 serrated flange head screw

M5 x .8 x 10 mm screw

uni-clip

plastic cover for anti-rollout hook

#10 x 3/4 particle board screw

#10 flat washer

M O D E L N U M B E R

DESCRIPTION

JM 2640S

128-4023

128-4024

128-4129

128-4109

128-4116

128-4117

128-4105

570-2024

128-4017

128-4335

128-4334

540-9432

1800-375S

540-9431

128-4067

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

JM 2640DS

128-4026

128-4027

128-4134

128-4109

128-4116

128-4117

128-4105

570-2024

128-4017

128-4335

128-4334

540-9432

1800-375S

540-9431

128-4067

1446-014S

520-2047

530-2016

520-9269

520-2166

520-7041

520-7105

520-2005

2245-081S

590-7055

500-2014

540-9442

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

3 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

SIDEVIEW

FLOOR

!Place TV onto a piece of pipe as

shown.(Pipeshouldbeafewinches

wider than the TV.) Roll TV back and

forth to find the balance point. This is

the center of gravity. Mark the center

of gravity on the side of the TV.

CENTEROF

GRAVITY

"Adjust support tray (A1,A2,& A3, three pieces)

to match width of TV.

Lock support tray using four carriage bolts (O),

andwasher/nutcombos(P).Tightensecurely.

Attachadhesivepads

(F) to top clamps (E).

Insertplasticcovers(Y)

ontoendsofanti-rollout

hooks(C).

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

4 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

Attach support tray (A) to vertical support arms (B) as shown. Choose the square hole which aligns closest

with the center of gravity mark on the TV (as determined in step 1). Attach anti-rollout hooks (C) as shown

usingM6screws(S)andretainerbars(D).

Althoughtopclamps(E)and anti-rollout

hooks (C) [see step 5] will provide more than

adequate support for the TV, some installers

may wish to also attach the support tray to

the TV bottom.

Using uni-clips (X) and M5 screws (W) (see

instruction card in fastener pack), or #10 x

3/4"particleboardscrews(Z)andwashers

(AA)(forattachmenttomountingbossesif

present), or a combination of both, attach

support tray (A) to TV bottom. [To do this

place TV upside down on a flat stable

surfaceandposition supporttrayupside

down on TV bottom.] Attach at four places

as close to the four corners of the TV bottom

as possible.

Required for OSHPD approved installation - optional otherwise

TV BOTTOM

TV(UPSIDEDOWN)

Note:Extrudedsideofretainerbar(D)goestowards

anti-rollouthook(C).Handtightenonly.

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

5 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

Pump ratchet handle to tighten belt. For secure

hold, ratchet reel must have at least two layers of

belt around it.

Note: Too many layers of belt around ratchet reel

will cause it to jam. To avoid this problem be sure to

remove ALL slack from belt before pumping ratchet

handle.

After belt is tight, close ratchet handle.

To release, compress release bar and open ratchet

handle 180°.

Wrap belt around TV or monitor and mounting

surface. Insert end of belt through ratchet reel

and pull until ALL slack is out of belt.

release bar

ratchet

handle

belt

Insert belt under,

behind, then through

ratchet reel.

ratchet reel

Position TV on support tray (A), thread belt through slots in top

clamps (E). Secure TV with belt as directed in detail 1, 2, & 3.

Safety belt, ACC 666 (Sold Separately), required for OSHPD approved installation.

Use of this belt is optional for all other installations.

Optional safety belt ACC 666 (required for OSHPD approved

installation) sold separately.

Threadbeltbetweensupportarms(B)andanti-rollouthooks(C),

andbetweensupportarms(B)andsupporttray(A).

belt

detail 1

detail 2

detail 3

belt

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

6 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

%Note: Slots in corners of top clamps (E) and corners of vertical support arms (B) allow for the installation of

safety belt (model ACC 666, sold separately). If using this belt, install it now as shown on page five.

Position TV onto support tray (A).Positionanti-rollouthooks(C) against front edge of TV.

Insert and press down on top clamps (E) with sufficient force to assure that the top clamps are fitted snugly to

theTVcabinet.Note: Topclamps(E)fit betweenrolloutprotectors(C)and verticalsupportarms(B) [DETAIL1].

Press down on each top clamp (E) while securely tightening each M6 screw (S).

Press inwards on the left and right vertical support arms (B) with sufficient force to assure that the arms are

fitted snugly to the TV cabinet. By hand, thread one M10 serrated flange head screw (U) into each vertical

support arm (B)throughoneofthreethreadedholes[1,2,or3;DETAIL2].Choosethethreadedholes that will

allowjustenoughclearance(approximately11/2")between the horizontal support arm and top clamps[see

step7].Leaveabout 1/4" ofexposedthread.

DETAIL 1

DETAIL 2

• Each anti-rollout hook (C) should have at least 1/4" of surface contact and fit snugly against the front edge of the

TV cabinet. If this is not the case, the support tray (A) must be adjusted smaller [see step 2], or the vertical

support arms (B) adjusted inward [see step 4].

WARNING

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

7 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

&Jumbo mount shown with optional ceiling plate/wall arm accessories.

FIRST: From the top fully thread flush mount tube (N) into threaded fitting in wall arm or ceiling plate. Install

the wall arm or ceiling plate according to instructions included with it.

NEXT: Attach right and left tilt brackets (H &I) to horizontal support (G) using four screw/washer combos

(T). Before tightening screws make sure tilt brackets are adjusted horizontally to align precisely with screws

in the side of vertical support arms (B). Attach horizontal support (G) to wall arm or ceiling plate using fiber

washers (J &L), spacer (M, only included with smaller models) and retaining collar (K). IMPORTANT:

Retainingcollar(K)requiresasafetyscrew(W)[refertoDETAIL3, page 8].

FINALLY: Be sure that hooks in right and left tilt brackets (H & I) are open end forward. Hang the TV /

bracket assembly.

Insert one screw/washer combo (T) through slot in each tilt bracket (H & I). Hand tighten.

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

8 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

When attaching the horizontal support (G) to wall arm or ceiling

plate,carefullythreadretainingcollar (K)ontoendofflushmount

(N)tube(orextension column). Tighten atleastfourcompleteturns

ending with one of the small threaded holes aligned with slot in the

endofflushmount tube(N)(orextension column).Insertand

tighten one M5 screw (W).

DETAIL3

(BOTTOMVIEW)

TILTCLEARANCE

'Adjust TV to desired tilt, then TIGHTEN ALL SCREWS SECURELY. Maximum tilt is 30°. If tilt

clearance is a problem revisit step 5, DETAIL 2.

• Set screw (W) is self tapping and may be hard to get

started but is essential to this installation. Failure to

install this screw can cause the mount to fall.

WARNING

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

9 of 9ISSUED: 08-11-04 SHEET #: 128-9151-2 06-21-05

APPLICATION: ATTACHMENT TO CONCRETE MOUNTING SURFACE

Support

Tray

Depth

10"

14"

10"

14"

TV/Monitor Product Peerless rated when attached to...

Screen

Aspect

Ratio

standard

wide

standard

wide

standard

wide

Model

Number

JM 2630S

JM 2640S

JM 2640DS

JM 2650S

JM 2650DS

JM 2655S

JM 2660S

JM 2665S

JM 2670S

JM 2675S

(330 mm) (432 mm)

(482 mm) (533 mm)

(635 mm) (711 mm)

(762 mm) (889 mm)

(686 mm) (889 mm)

(940 mm) (1067 mm)

(889 mm) (1067 mm)

(254 mm)

(356 mm)

(254 mm)

(356 mm)

Screen Size

13" - 17"

19" - 21"

25" - 27"

30" - 35"

27" - 35"

37" - 42"

35" - 42"

Support

Tray

Depth

10"

14"

10"

14"

Jumbo 2000 mount TV/Monitor

JUMBO2000®SPECIFICATIONS

Product Peerless rated when attached to...

Screen

Aspect

Ratio

standard

wide

standard

wide

standard

wide

Model Number

JM 2630S

JM 2640S

JM 2640DS

JM 2650S

JM 2650DS

JM 2655S

JM 2660S

JM 2665S

JM 2670S

JM 2675S

(330 mm) (432 mm)

(482 mm) (533 mm)

(635 mm) (711 mm)

(762 mm) (889 mm)

(686 mm) (889 mm)

(940 mm) (1067 mm)

(889 mm) (1067 mm)

(254 mm)

(356 mm)

(254 mm)

(356 mm)

Screen Size

13" - 17"

19" - 21"

25" - 27"

30" - 35"

27" - 35"

37" - 42"

35" - 42"

APPLICATION: ATTACHMENT TO WOOD MOUNTING SURFACE

*not compatible

Wall Arm

WMJ018S

150 lb

(65 kg)

Wall Arm

WMJ018S

125lb

125 lb

(57 kg)

Wall Arm

WMJ022S

150 lb

Suspended

Ceiling Plate

CMJ450

250 lb

(113 kg)

Double

Wall Arm

WMJ025HS

300 lb

(137 kg)

Double

Wall Arm

WMJ025HS

300 lb

(137 kg)

Suspended

Ceiling Plate

CMJ450

250 lb

(113 kg)

Ceiling Plate

CMJ 470W,

CMJ 480W,

CMJ 490W

300 lb

(137 kg)

Ceiling Plate

CMJ 470W,

CMJ 480W,

CMJ 490W

300 lb

Jumbo 2000 mount

JUMBO2000®SPECIFICATIONS

(65 kg)

(57 kg)

Wall Arm

WMJ022S

125 lb

PeerlessandJumbo2000areregisteredtrademarksofPeerlessIndustries,Inc.

Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.

• Weight of TV or monitor not to exceed maximum load capacity (Peerless rated)!

WARNING

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PEERLESS TV-Halterung Handbücher

PEERLESS

PEERLESS PARAMOUNT PT660 Bedienungsanleitung

PEERLESS

PEERLESS HAVE1 FPZ-655 Bedienungsanleitung

PEERLESS

PEERLESS IM740P Leitfaden

PEERLESS

PEERLESS CMJ 470 Leitfaden

PEERLESS

PEERLESS PARAMOUNT PRTLU Bedienungsanleitung

PEERLESS

PEERLESS SMART MOUNT SF 16D and assembly Leitfaden

PEERLESS

PEERLESS HLG452-002 Leitfaden

PEERLESS

PEERLESS PARAMOUNT PT660 Leitfaden

PEERLESS

PEERLESS SR1M Leitfaden

PEERLESS

PEERLESS Paramount PC930A Bedienungsanleitung

PEERLESS

PEERLESS SUF640P and assembly Leitfaden

PEERLESS

PEERLESS SlimLine SLWS210/BK Bedienungsanleitung

PEERLESS

PEERLESS SUA746PU Leitfaden

PEERLESS

PEERLESS Smartmount ST630P and assembly Leitfaden

PEERLESS

PEERLESS SP730P and assembly Leitfaden

PEERLESS

PEERLESS Smartmount ST650 and assembly Leitfaden

PEERLESS

PEERLESS PLA1-UN7 Leitfaden

PEERLESS

PEERLESS PLA 60 and assembly Leitfaden

PEERLESS

PEERLESS Smartmount D-FPT-220 Leitfaden

PEERLESS

PEERLESS SUF660P and assembly Leitfaden

PEERLESS

PEERLESS LWS310/BK Leitfaden

PEERLESS

PEERLESS PM 13 and assembly Leitfaden

PEERLESS

PEERLESS PLCM-UNL Bedienungsanleitung

PEERLESS

PEERLESS PLA 50-S Leitfaden

Beliebte TV-Halterung Handbücher anderer Marken

Ergotron

Ergotron Neo Flex Cantilever UHD Bedienungsanleitung

StarTech.com

StarTech.com FPCEILBTB Bedienungsanleitung

VonHaus

VonHaus 05/038 Bedienungsanleitung

Techlink

Techlink ECHO TV Bedienungsanleitung

Sandstrom

Sandstrom SSTVMC12X Bedienungsanleitung

Sony

Sony SU-WL700 Leitfaden

ICW

ICW SCACC18 Bedienungsanleitung

LG WM-L640V Bedienungsanleitung

Gembird

Gembird WM-65ST-01 Bedienungsanleitung

ERARD

ERARD FiTUP XXL 035320 Bedienungsanleitung

Kanto

Kanto RCF180 Bedienungsanleitung

GEM

GEM GEM GP001 Bedienungsanleitung

Gladiator Joe

Gladiator Joe GJ0A0053 Bedienungsanleitung

Vivotek

Vivotek AM-105 Bedienungsanleitung

Vivo

Vivo VESA STAND-VAD1B Bedienungsanleitung

AmazonBasics

AmazonBasics B07QG3LMG4 Bedienungsanleitung

Secura

Secura QLF210 Bedienungsanleitung

Marquant

Marquant 929-083 Betriebsanleitung