Pegasus DC-7010 Bedienungsanleitung

Ver.1 2011.03

Pegasus DC-7010 Data

Collector

CollectorCollector

Collector

User’s Manual

Contents

1. Introduction .......................................................................................................................................... 1

1.1. Features ........................................................................................................................................... 1

1.2. Unpack ............................................................................................................................................. 1

1.3. Overview .......................................................................................................................................... 2

2. Key ad .................................................................................................................................................. 3

2.1. Function Keys .................................................................................................................................. 3

2.2. FN Key + Numeric Key .................................................................................................................... 3

2.3. Numeric and Alpha etic Keys .......................................................................................................... 4

3. Battery Care .......................................................................................................................................... 5

3.1. Charging the Battery ........................................................................................................................ 5

3.1.1. Recharge y the cradle with USB interface ca le ................................................................. 5

3.1.2. Recharge y the cradle with RS-232 interface ca le ............................................................ 6

3.1.3. Low Battery Warning ............................................................................................................. 6

3.1.4. Auxiliary Battery .................................................................................................................... 7

3.1.5. Replace Battery .................................................................................................................... 7

4. Communication/Utility ......................................................................................................................... 8

4.1 Installing cradle with USB interface ca le ......................................................................................... 8

4.2. Communication .............................................................................................................................. 9

5. Get Started .......................................................................................................................................... 10

5.1. Turn On .......................................................................................................................................... 10

5.2. Turn Off .......................................................................................................................................... 10

5.3. Main Menu ..................................................................................................................................... 10

5.3.1. Collect ............................................................................................................................... 11

5.3.2. Upload ............................................................................................................................... 11

5.3.3. Browse .............................................................................................................................. 12

5.3.4. Delete ................................................................................................................................ 13

5.3.5. Utilities .............................................................................................................................. 14

5.3.6. Download .......................................................................................................................... 18

6. Memory ............................................................................................................................................... 19

6.1. Memory ........................................................................................................................................ 19

6.2. Memory Near Full warning ............................................................................................................. 19

6.3. Memory Full warning ...................................................................................................................... 19

7. Exam le .............................................................................................................................................. 20

7.1. Collecting data ............................................................................................................................... 21

7.2. Lookup ........................................................................................................................................... 23

7.3. Browse ........................................................................................................................................... 24

1. Introduction

DC-7010 is a attery-operated porta le data collector with lookup function. Equipped with high quality

laser engine, it is easy and fast to acquire accurate arcode data. The ergonomic- uilt ody offers

comforta le gra to guaranty DC-7010 ideal for long-time work. The vividly right LCD display, tactile

keypad (21 key), and small foot-print cradle furnish convenient operations and data processing: key-in,

editing, navigation, communication and attery-charging.

In addition, DC-7010 provides a very user-friendly jo generator utility. You need not create applications

y writing the program source code anymore. With the aid of Jo Generator, you may convert

incomprehensi le development process to simple steps and configurations and makes data collecting

works ecome distinct and effortlessly.

DC-7010 is an ideal device for various data collecting applications, such as warehouse management,

shop floor management, asset tracking…etc.

1.1. Features

 Jo Generator offers users to design their own application easilly.

 High quality laser engine equipped makes arcode reading aggressively.

 The ig capacity rechargea le attery endures long working time.

 A cradle offers communication and recharge via RS-232 or USB ca les.

 A tactile 21 keys keypad provides works of arcode scan, data key-in, editing and navigation

comforta ly.

 Great sharp LCD with acklight furnishes clear and pleasant viewing.

 A capacious memory furnishes a large amount of data storage.

1.2. Un ack

Standard Package

 BCP unit x 1

 Cradle with USB interface for recharge and communication x 1

 CD disk contains with DC-7010 User’s Manual and DC-7010 Jo Generator Utility Operation

Manual and example Jo Application file x 1

O tions

 Cradle with RS-232 interface for recharge/communication ca le.

 Power adapter: 110V or 220V for cradle with RS-232 interface.

Note:

＊ The contents may vary with different options.

＊ If there’s any physical damage or missing parts, please contact your supplier immediately.

＊ Please keep all packing material and items as they were as the product may e send ack terminal

for service.

1.3. Overview

FRONT VIEW SIDE VIEW REAR VIEW

2. Key ad

The terminal equips with 21 ru er keys. All the keys’ details/functions are descri ed at Section 2.1, 2.2

and 2.3.

2.1. Function Keys

Scan ： Press to scan a arcode.

Down ： Press to cursor down.

Up ： Press to cursor up.

Alpha ： The toggle key to shift etween Alpha et Upper Case, Lower

Case and Numeric modes.

Back Space ： The ack space key.

Space ： The space key.

Enter ： This key is for data enter confirmation or execution command.

Power ： The toggle key to shift etween power on or power off.

To avoid an accidental press, it requires pressing it for over 1.5

sec. to activate the terminal to power on or off.

Function ： The key has to associate with another numeric key to activate

the functions. Please refer to Section 2.2 “ FN Key + Numeric

Key” for further information.

Escape ： Exit or purge the current operation and ack to previous

operation/menu.

2.2. FN Key + Numeric Key

Fn+0 (Backlight Switch): When operating under a low-light environment, press “FN” key then press

“0” key; it would turn on the LCD acklight so as to acquire etter images.

Press “Fn” key then press “0” key again to turn off the acklight.

2.3. Numeric and Al habetic Keys

1 (ABC)(a c) Numeric 1 or Alpha A,B,C or (a, ,c)

2 (DEF)(def) Numeric 2 or Alpha (D,E,F) or (d,e,f)

3 (GHI)(ghi) Numeric 3 or Alpha (G,H,I) or (g,h,i)

4 (JKL)(jkl) Numeric 4 or Alpha (J,K,L) or (j,k,l)

5 (MNO)(mno) Numeric 5 or Alpha (M,N,O) or (m,n,o)

6 (PQR) (pqr) Numeric 6 or Alpha (P,Q,R) or (p,q,r)

7 (STU)(stu) Numeric 7 or Alpha (S,T,U) or (s,t,u)

8 (VWX) (vwx) Numeric 8 or Alpha (V,W,X) or (v,w,x)

9 (YZ*)(yz*) Numeric 9 or Alpha (Y,Z) or sym ol(*) or (y,z) or (*)

-%: Numeric (.) or Sym ol (-, %, :)

0+$/ Numeric (0) or Sym ol (+, $, /)

3. Connecting to Your PC

DC-7010 can easily perform data management, unit configuration and attery charge via the undled

cradle.

The attery supplied in each terminal unit has een partially charged at the factory. It is recommended to

charge the attery efore first use.

You can install the terminal unit to the undled cradle and charges the attery either from USB or RS-232

interface ca le.

3.1. Connecting to Your PC and Charging the Battery

3.1.1. Connecting to PC by the cradle with USB interface cable:

 Connect the USB interface ca le to the USB port on the PC. The ORANGE power LED in front of

the cradle would e lighted. The cradle is ready for recharging the attery or terminal configuration.

 Place the terminal onto the cradle. You may hear a eep sound when the terminal is placed onto

the cradle if the SETTING item “Key Click” is set to “Ena le”.

 There is a LED indicator on the top of the terminal and lit RED.

In the Display of the terminal there is a attery status icon indicates the attery status.

 As the attery is eing charged, the attery status icon is varying and indicates the attery is

charging. It takes approximately 6 hours to charge from low attery status..

 When the attery is charged completely, the attery status icon will turn to static and indicated the

attery is full (dark icon). The terminal RED LED turns off.

＊ To install USB driver of DC-7010, please refer to “4. Communication / Utility” for further information.

USB Connector

3.1.2. Connecting to PC by the cradle with RS-232 interface cable

 Turn off computer efore connection.

 Connect the DC plug of the power adapter to the power jack which located at the DB9F connector.

 Connect the DB9F connector (with power jack connected) to PC.

 Connect the AC Adaptor to an electrical outlet. The ORANGE power LED in front of the cradle

would e lighted. The cradle is ready for recharging the attery or terminal configuration.

 Place the terminal onto the cradle. You may hear a eep sound when the terminal is placed onto

the cradle if the SETTING item “Key Click” is set to “Ena le”.

 There is a LED indicator on the top of the terminal and lit RED.

In the Display of the terminal there is a attery status icon indicates the attery status.

 As the attery is eing charged, the attery status icon is varying and indicates the attery is

charging. It takes approximately 6 hours to charge from low attery status..

 When the attery is charged completely, the attery status icon will turn to static and the terminal

RED LED turns off.

3.1.3. Low Battery Warning

When the attery availa le capacity drops low, a flashing empty attery icon will e appeared at the right

ottom corner of the display. There are a out 500 scans can e made after the warning occurred.

Note:

When Low Battery Warning appears:

 Terminate the work.

 Put the terminal ack in the cradle to charge the attery.

DB9F Connector to RS-232

3.1.4. Auxiliary Battery

The terminal is equipped with an auxiliary rechargea le attery to furnish the power supply to SRAM. The

auxiliary attery can work at least one month since the main attery removed from the terminal or the

main attery stores no power.

Note:

The maintenance or replacement of Auxiliary Battery is for qualified service personnel only. Any

unauthorized changes or modifications could void the warranty.

3.1.5. Re lace Battery

In case you need to replace the attery on your own, follow the steps elow.

Step 1: Press and push to unlock the attery cover.

Step 2: Remove the attery cover.

Sep 3: Slight lift and remove the attery from the attery compartment.

Step 4: Replace a new attery into the attery compartment and then replace the attery cover.

Note:

＊ Make sure to turn off the terminal and upload the data in the terminal efore attery replacement.

＊ Make sure the exposed cooper contacts of attery are engaged into the attery compartment.

＊ Battery Disposal: Do Not dispose the attery and make sure to follow the attery recycling

guidelines.

4. Communication/Utility

4.1 Installing Cradle with USB interface cable

Installing USB Driver

When you plug in the USB interface ca le to your host PC for the first time, you will e prompted to install

a device driver for the newly detected hardware. Insert the undled Utility/Driver CD disk into an availa le

CDROM on your PC. Specify the path to the USB Driver folder and complete the driver installation. You

only need to install the device once.

USB driver will automatically assign a virtual serial port (recommended) for communications.

You can manually assign the COM Port. Enter the advance menu of the device for advanced

configurations. Execute Start > Control Panel > System > Hardware > Device Manager > Ports (Com

& LPT) will lead you to identify the port num er.

Andere Handbücher für DC-7010

Inhaltsverzeichnis

Andere Pegasus Datenlogger Handbücher

Pegasus

Pegasus DC-7010 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung