Penguin Computing MLB 2203 Bedienungsanleitung

Motherboard

User Manual

MLB 2203/2213

Sep. 2006 (Revision B)

P/N: 1230B0026701

All rights, including copyright, in the content of this manual are owned or controlled by IESC and

protected by the Taiwan and international copyright act.

No one may, transmit, adapt, assign, compile, rent, sale, change, copy, reproduce, distribute, publish,

display, broadcast, or use in any way the content of this manual, in whole or in part, for any other

purpose whatsoever without the prior written permission of IESC.

All product names or brands mentioned herein are the trademarks of IESC, its subsidiaries or other

respective owners in Taiwan, United States and other countries.

This manual provides the information in relation to the set-up and installation of the product herein.

Nothing herein may be construed as granting any right or license relating to any intellectual property

rights of this manual or product. Unless otherwise provided in the Purchase and Sale Agreement for

this product, manufacturer and distributor of this product will not be liable whatsoever relating to the

distribution and/or use of this product. In addition, manufacturer and distributor of this product hereby

specifically disclaim any express or implied warranties of merchantability, fitness for a particular

purpose, or non-infringement of third party rights in connection with this product.

Manufacturer of this product may have the right to change specifications and product descriptions at

any time without notice.

About This Manual ........................................................................................................................................i

Conventions..................................................................................................................................................i

Safety Symbols............................................................................................................................................ii

Safety Precautions......................................................................................................................................iii

Operation Safety.....................................................................................................................................iii

Electrical Safety .....................................................................................................................................iii

Battery Replacement Safety...................................................................................................................iv

Laser Peripherals or Devices Safety........................................................................................................v

Intended Application Uses.......................................................................................................................v

Site Selection...........................................................................................................................................v

Tools Required ........................................................................................................................................v

Regulatory and Integration Information.....................................................................................................vi

Regulatory Compliance Identification Numbers....................................................................................vi

Product Regulatory Compliance ............................................................................................................vi

1Introduction........................................................................................................................................1-1

1.1 Audience Assumptions.................................................................................................................1-1

1.2 Manual Organization....................................................................................................................1-1

1.3 Product Features...........................................................................................................................1-2

1.4 Motherboard Layout.....................................................................................................................1-4

1.4.1 Connectors and Component Locations.................................................................................1-4

1.4.2 Back Panel Connectors.........................................................................................................1-6

1.4.3 System LED Information .....................................................................................................1-6

1.4.4 Port 80 LEDs Information....................................................................................................1-7

2Hardware Operations ........................................................................................................................2-1

2.1 Before You Start...........................................................................................................................2-1

2.2 Screw Holes..................................................................................................................................2-2

2.3 Battery..........................................................................................................................................2-3

2.3.1 To remove the battery...........................................................................................................2-4

2.3.2 To install the battery.............................................................................................................2-4

2.4 Processor ......................................................................................................................................2-5

2.4.1 To remove the heat sink........................................................................................................2-6

2.4.2 To install the heat sink..........................................................................................................2-6

2.4.3 To remove the processor.......................................................................................................2-7

2.4.4 To install the processor.........................................................................................................2-8

2.4.5 To remove the heat sink socket ............................................................................................2-9

2.4.6 To install the heat sink socket...............................................................................................2-9

2.5 System Memory .........................................................................................................................2-10

2.5.1 DIMM Population ..............................................................................................................2-10

2.5.2 To remove a DIMM............................................................................................................2-13

2.5.3 To install a DIMM..............................................................................................................2-14

2.6 System Configuration Jumper....................................................................................................2-15

3Connectors and Jumper.....................................................................................................................3-1

3.1 Power Connectors (J8, J6)............................................................................................................3-1

3.1.1 Main Power Connector (J8) .................................................................................................3-1

3.1.2 Processor Power Connector (J6) ..........................................................................................3-2

3.2 Front Panel IDE Connector (J24).................................................................................................3-3

3.3 Floppy Connector (J45)................................................................................................................3-5

3.4 Chassis Intrusion Connector (J27)................................................................................................3-6

3.5 Front Panel VGA Connector (J68) ...............................................................................................3-7

3.6 D-sub VGA Port (J61)..................................................................................................................3-8

3.7 Serial Port (J62)............................................................................................................................3-9

3.8 Keyboard and Mouse Ports (J60, J59)........................................................................................3-10

3.9 Rear Dual USB Port (J58)..........................................................................................................3-12

3.10 Front Panel USB Connector (J19)..............................................................................................3-13

3.11 I2C (SMBus) Signal Connector for PSU (J20)...........................................................................3-14

3.12 Two Dual NIC Connectors (RJ45) (J56, J57).............................................................................3-15

3.13 Management Port (RJ45) (J75) ..................................................................................................3-17

3.14 Fan Board Connector (J1) ..........................................................................................................3-18

3.15 Mini-SAS Connectors (J69, J70, J71, J72).................................................................................3-19

3.16 LCM Connector (Optional) (J73)...............................................................................................3-20

3.17 Internal USB Port for USB Floppy (J67)...................................................................................3-21

3.18 System Configuration Jumper Setting (J54)...............................................................................3-22

4BIOS Setup .........................................................................................................................................4-1

4.1 BIOS Setup Utility.......................................................................................................................4-1

4.2 Entering the BIOS Setup Utility...................................................................................................4-2

4.3 Keyboard Command Bar..............................................................................................................4-3

4.4 BIOS Updates...............................................................................................................................4-5

4.4.1 BIOS Requirements..............................................................................................................4-5

4.4.2 ROM Flash...........................................................................................................................4-5

Figure 1-1 Motherboard Overview....................................................................................................1-2

Figure 1-2 Connectors and Component Locations............................................................................1-4

Figure 1-3 Back Panel Connectors....................................................................................................1-6

Figure 1-4 Port 80 LEDs...................................................................................................................1-7

Figure 2-1 Screws Placement............................................................................................................2-2

Figure 2-2 Battery Location..............................................................................................................2-3

Figure 2-3 Pulling the Battery out of the Holder...............................................................................2-4

Figure 2-4 Putting the Battery into the Holder..................................................................................2-4

Figure 2-5 Processor Location ..........................................................................................................2-5

Figure 2-6 Pulling up the Heat Sink..................................................................................................2-6

Figure 2-7 Opening the Load Plate ...................................................................................................2-7

Figure 2-8 Lifting the Processor out of the Socket............................................................................2-7

Figure 2-9 Closing the Load Plate.....................................................................................................2-7

Figure 2-10 Placing on the PnP Cap..................................................................................................2-8

Figure 2-11 Aiming the Golden Corner at the Socket.......................................................................2-8

Figure 2-12 Removing the Heat Sink Base Socket...........................................................................2-9

Figure 2-13 Lifting up the Heat Sink Socket.....................................................................................2-9

Figure 2-14 System Memory Location............................................................................................2-10

Figure 2-15 Lifting the DIMM out of the Socket............................................................................2-13

Figure 2-16 Pressing the Retaining Clips Outward.........................................................................2-14

Figure 2-17 Inserting the DIMM into the Socket............................................................................2-14

Figure 2-18 System Configuration Jumper Location......................................................................2-15

Figure 3-1 Main Power Connector....................................................................................................3-1

Figure 3-2 Processor Power Connector.............................................................................................3-2

Figure 3-3 Front Panel IDE Connector .............................................................................................3-3

Figure 3-4 Floppy Connector............................................................................................................3-5

Figure 3-5 Chassis Intrusion Connector............................................................................................3-6

Figure 3-6 Front Panel VGA Connector............................................................................................3-7

Figure 3-7 D-sub VGA Port ..............................................................................................................3-8

Figure 3-8 Serial Port........................................................................................................................3-9

Figure 3-9 Keyboard Port................................................................................................................3-10

Figure 3-10 Mouse Port...................................................................................................................3-11

Figure 3-11 Rear Dual USB Port.....................................................................................................3-12

Figure 3-12 Front Panel USB Connector ........................................................................................3-13

Figure 3-13 I2C (SMBus) Signal Connector for PSU......................................................................3-14

Figure 3-14 Dual NIC Connector (RJ45)........................................................................................3-15

Figure 3-15 Management Port (RJ45).............................................................................................3-17

Figure 3-16 Fan Board Connector...................................................................................................3-18

Figure 3-17 Mini-SAS Connector...................................................................................................3-19

Figure 3-18 LCM Connector...........................................................................................................3-20

Figure 3-19 Internal USB Port for USB Floppy..............................................................................3-21

Figure 3-20 System Configuration Jumper .....................................................................................3-22

Table 1-1 Introduction of the Manual................................................................................................1-1

Table 1-2 Product Features................................................................................................................1-2

Table 1-3 LED Information...............................................................................................................1-6

Table 1-4 Code Information ..............................................................................................................1-8

Table 1-5 Boot Block Initialization Code Checkpoints.....................................................................1-8

Table 1-6 Bootblock Recovery Code Checkpoints............................................................................1-9

Table 1-7 POST Code Information..................................................................................................1-10

Table 1-8 DIM Code Checkpoints...................................................................................................1-13

Table 1-9 ACPI Runtime Checkpoints............................................................................................1-13

Table 1-10 Beep Codes....................................................................................................................1-13

Table 1-11 Troubleshooting BIOS Beep Codes...............................................................................1-14

Table 2-1 DIMM Installation Option 1 ...........................................................................................2-11

Table 2-2 DIMM Installation Option 2 ...........................................................................................2-12

Table 3-1 Main Power Connector Pin Definition..............................................................................3-2

Table 3-2 Processor Power Connector Pin Definition.......................................................................3-2

Table 3-3 Front Panel IDE Connector Pin Definition .......................................................................3-3

Table 3-4 Floppy Connector Pin Definition......................................................................................3-5

Table 3-5 Chassis Intrusion Connector Pin Definition......................................................................3-6

Table 3-6 Front Panel VGA Connector Pin Definition......................................................................3-7

Table 3-7 D-sub VGA Port Pin Definition ........................................................................................3-8

Table 3-8 Serial Port Pin Definition..................................................................................................3-9

Table 3-9 Keyboard Port Pin Definition..........................................................................................3-10

Table 3-10 Mouse Port Pin Definition.............................................................................................3-11

Table 3-11 Rear Dual USB Port Pin Definition...............................................................................3-12

Table 3-12 Front Panel USB Connector Pin Definition ..................................................................3-13

Table 3-13 I2C (SMBus) Signal Connector for PSU Pin Definition ...............................................3-14

Table 3-14 Dual NIC Connector (RJ45) Pin Definition..................................................................3-15

Table 3-15 Management Port (RJ45) Pin Definition.......................................................................3-17

Table 3-16 Fan Board Connector Pin Definition.............................................................................3-18

Table 3-17 Mini-SAS Connector Pin Definition.............................................................................3-19

Table 3-18 LCM Connector Pin Definition.....................................................................................3-20

Table 3-19 Internal USB Port for USB Floppy Pin Definition........................................................3-21

Table 3-20 System Configuration Jumper Function........................................................................3-22

Table 4-1 BIOS Setup Utility Screen Description.............................................................................4-2

Table 4-2 Keyboard Command Bar Description...............................................................................4-3

Table 4-3 BIOS Requirements Description.......................................................................................4-5

About This Manual

Conventions

Safety Precautions

Regulatory and Integration Information

About This Manual

1230B0026701 i

To make sure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

Warning: Information to prevent injury to yourself when trying to complete a task.

Caution: Information to prevent damage to the components when trying to complete

a task.

Important: Information that you must follow to complete a task.

Note: Tips and information to aid in completing a task.

About This Manual

1230B0026701 ii

Before troubleshooting, you must be familiar with the safety information listed below. In order to avoid

any potential hazards, the following symbols may be placed on some components of the server.

The shape and the color of symbols shown below are mainly for your reference. Please take the actual

shipment as standard.

Indicates the potential hazard of energy circuits or electric shock. To reduce the risk of

injury from electric hazards, do not open this enclosure.

Warning: Any surface or area of the equipment marked with this symbol indicates the

presence of electric shock hazards. The enclosed area contains no operator serviceable

parts.

Indicates the potential hazard of electric shock. The enclosed area contains no user of

field serviceable parts. Do not open for any reason.

Warning: To reduce the risk of injury from electric shock hazards, do not open this

enclosure.

Indicates the presence of a hot surface or hot component.

Warning: To reduce the risk of injury from a hot component, allow the surface to co

before touching it.

Any RJ45 receptacle marked with this symbol indicates a network interface connection

Warning: To reduce the risk of electric shock, fire, or damage to the equipment, do no

plug telephone or telecommunications connectors into this receptacle.

This symbol, on power supplies or systems, indicates that the equipment is supplied

by multiple sources of power.

Warning: To reduce the risk of injury from electric shock, remove all power cords to

completely disconnect power from the system.

Weight in kg

Weight in lb

This symbol indicates that the component exceeds the recommended weight for one

individual to handle safely.

Warning: To reduce the risk of personal injury or damage to the equipment, observe

local occupational health and safety requirements and guidelines for manual material

handling.

About This Manual

1230B0026701 iii

Observe the following safety precautions when you are connecting or disconnecting any device.

 Regarding the standards of workstation regulations, do not place the server in the visual

field of the user, because of the glossy front of the case.

 The product is non-consumer product and for profession technical person used only.

Operation Safety

 Any operation on this server must be conducted by certified or experienced engineers.

 Before operating your server, carefully read all the manuals included with the server package.

 Before using the server, make sure that all cables are correctly connected and power cables are not

damaged. If any damage is detected, contact your dealer as soon as possible.

 To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets

and circuitry.

 Before opening the chassis panels, make sure all power cables are unplugged.

 Avoid dust, humidity, and extreme temperatures, place the server on a stable surface.

 If the power supply is broken, do not try to fix it by yourself. Contact an authorized dealer.

 It is recommended that you wear gloves when assembling or dissembling the server to protect

from cuts and scrapes.

 When the server is powered on, heat sinks and the surfaces of certain IC devices may be hot. Do

not touch them. Check whether the fans are functioning properly.

Electrical Safety

 Before installing or removing signal cables, ensure that the power cables for the system unit and

all attached devices are unplugged.

 To prevent electric shock hazard, disconnect the power cable from the electrical outlet before

relocating the system.

 When adding or removing any additional devices to or from the system, ensure that the power

cables for those devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

 Use one hand, when possible, to connect or disconnect signal cables to prevent a possible shock

from touching two surfaces with different electrical potentials.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Penguin Computing Hauptplatine Handbücher

Penguin Computing

Penguin Computing R270-B2O Kurzanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung