Penn VFD68BBB Service-Handbuch

Refer to the QuickLIT website for the most up-to-date version of this document.

VFD68 Variable Frequency Drives (230 or 460 VAC) Installation Instructions

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

North American Emissions Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Agency Standards Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Checking the Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Selecting a Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Selecting a VFD68 Drive for Controlling Multiple Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Location Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Terminal Screw Torque Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Branch Circuit Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Short Circuit Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

High-Voltage Wire Size and Maximum Wire Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Selecting the Correct VFD68 Drive for a Fan Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Calculating the Maximum Wire Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Making High-Voltage Wiring Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Making Low-Voltage Wiring Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Input Wiring Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

0.5–4.5 VDC Ratiometric P499 Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

0–10 VDC P499 Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

VFD68 Variable Frequency Drives

(230 or 460 VAC)

Installation Instructions

VFD68Bxx, VFD68Cxx Part No. 24-7664-3108, Rev. B

Issued July 17, 2015

VFD68 Variable Frequency Drives (230 or 460 VAC) Installation Instructions

4–20 mA P499 Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Setup and Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Correspondences Between Digital and Actual Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

RUN, MON, PRM LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

VFD68Bxx and VFD68Cxx Drive Basic and Advanced Parameters . . . . . . . . . . . . . . . . . . . . . 27

Frequency and Motor Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Parameter Settings Calculations for Motor Speed vs. Pressure . . . . . . . . . . . . . . . . . . . . . . . 31

PWM Frequency, Audible Motor Noise, and EMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Adjusting the Default Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Enter the Parameter Adjustment Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Select and Change Most Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Select and Change C-Prefix Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Exit the Parameter Adjustment Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Configuring Manual Motor Speed Control in PU Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Configuring EXT Mode Using Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Resetting the VFD68 Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Reset Option 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Reset Option 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Manually Stopping the Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Restarting the Motor After It Has Stopped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

VFD68Bxx or VFD68Cxx Variable Frequency Drive (230 or 460 VAC. . . . . . . . . . . . . . . . . . . . 39

VFD68 Variable Frequency Drives (230 or 460 VAC)

Introduction

The VFD68 Variable Frequency Drives are designed to provide three-phase motor speed control in a variety of

HVACR applications. The VFD68 drives are factory-configured for condenser fan speed control on HVACR

condensing units. You can quickly and easily reconfigure the VFD68 drives to control variable speed pumps in

cooling and heating applications, or to drive variable speed supply fans in VAV applications.

This document provides information for VFD68Bxx (230 VAC) and VFD68Cxx (460 VAC) drive models only.

For information pertaining to VFD68Dxx (575 VAC) drive models, refer to the VFD68 Variable Frequency Drive

(575 VAC) Installation Instructions (Part No. 24-7664-3116).

Note: The VFD68 drive cannot drive motors in conveyor systems or robotic applications.

Note: Do not attempt to install, operate, maintain, or inspect the VFD68 drive until you have read through this

document carefully and can use the equipment correctly. Do not use this product until you fully

understand the equipment, safety information, and instructions.

To view the VFD68 Variable Frequency Drive Technical Bulletin (Part No. 24-7664-3051), which covers

230 VAC, 460 VAC, and 575 VAC models, visit the following web address:

http://cgproducts.johnsoncontrols.com/MET_PDF/2476643051.pdf

North American Emissions Compliance

United States

Canada

IMPORTANT: Use this VFD68 Variable Frequency Drive only as an operating control. Where failure or

malfunction of the VFD68 Drive could lead to personal injury or property damage to the controlled equipment

or other property, additional precautions must be designed into the control system. Incorporate and maintain

other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect

against failure or malfunction of the VFD68 Drive.

IMPORTANT : Utiliser ce VFD68 Variable Frequency Drive uniquement en tant que dispositif de régulation.

Lorsqu'une défaillance ou un dysfonctionnement du VFD68 Drive risque de provoquer des blessures ou

d'endommager l'équipement contrôlé ou un autre équipement, la conception du système de contrôle doit

intégrer des dispositifs de protection supplémentaires. Veiller dans ce cas à intégrer de façon permanente

d'autres dispositifs, tels que des systèmes de supervision ou d'alarme, ou des dispositifs de sécurité ou de

limitation, ayant une fonction d'avertissement ou de protection en cas de défaillance ou de

dysfonctionnement du VFD68 Drive.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when this equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in a residential area may

cause harmful interference, in which case users will be required to correct the interference at their own expense.

This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur

du Canada.

VFD68 Variable Frequency Drives (230 or 460 VAC)

Agency Standards Compliance

• North America: cULus Listed; UL 508C, USA File: NMMS.E244421; Canada File: NMMS7.E244421

• Europe: CE Mark - Conforms to the provisions of the Low Voltage Directive and the EMC Directive when

an EMC-compliant line filter is attached to the power supply.1

• Australia: Regulatory Compliance Mark (RCM)

Installation

Checking the Rating Plate

Before you install the VFD, check the rating plate on the side to verify that the voltage, kW (horsepower), and

output current ratings are correct for your application. See Figure 1, Table 1, and Selecting the Correct VFD68

Drive for a Fan Motor on page 14.

1. For more information, see Appendix 5: EMC Line Filter Selection Chart in the VFD68 Variable Frequency Drive Technical

Bulletin (Part No. 24-7664-3051).

Table 1: VFD68 Drive Model Information

Voltage kW (Horsepower) Dimensions, H x W x D, mm (in.)

B200–240 VAC, 50/60 Hz 0.1 (1/8) 128 x 68 x 81 (5 x 2-11/16 x 3-3/16)

C400–480 VAC, 50/60 Hz 0.2 (1/4) 128 x 68 x 113 (5 x 2-11/16 x 4-7/16)

D0.4 (1/2) 128 x 68 x 133 (5x 2-11/16 x 5-1/4)

F0.75 (1) 128 x 108 x 130 (5 x 4-1/4 x 5-1/8)

G1.5 (2) 128 x 108 x 136 (5 x 4-1/4 x 5-5/16)

H2.2 (3) 128 x 108 x 156 (5 x 4-1/4 x 6-1/8)

J3.7 (5) 128 x 108 x 166 (5 x 4-1/4 x 6-1/2)

K5.5 (7-1/2) 128 x 170 x 142 (5 x 6-11/16 x 5-5/8)

L7.5 (10) 150 x 220 x 155 (5-15/16 x 8-11/16 x 6-1/8)

M11 (15) 150 x 140 x 136 (5-15/16 x 5-1/2 x 5-5/16)

N15 (20) 150 x 220 x 148 (5-15/16 x 8-11/16 x 5-13/16)

P260 x 220 x 190 (10-1/4 x 8-11/16 x 7-1/2)

Figure 1: Rating Plate

Rating plate

VFD model

Input rating

Output rating

Serial number

DATE:XXXX-XX

Production year and month

Johnson Controls

VFD68

-2C

Voltage

Kilowatts

(Horsepower)

Dimensions

H x W x D

FIG:VFD68_rtng_plt

SERIAL :

OUTPUT : XXXX

INPUT : XXXX

MODEL

VFD68 Variable Frequency Drives (230 or 460 VAC)

For example, a VFD68BGG would be rated for 200–240 VAC and 2 horsepower.

Selecting a Motor

Motors used with the VFD68 drive must:

• be AC induction three-phase motors that are UL Recognized and CSA Certified, or equivalent

• be rated for: 230 VAC at 50/60 Hz; 460 VAC at 50/60 Hz; or 575 VAC at 60 Hz

• have an Inverter Rating (460 VAC motors)

• have Insulation Class F or better

The VFD68 drive is intended for use with variable speed motors that are rated for 40:1 operation.

Note: If three-phase power is not available as supply power for the VFD68 drive, refer to the VFD68 Variable

Frequency Drive Technical Bulletin (Part No. 24-7664-3051).

Selecting a VFD68 Drive for Controlling Multiple Motors

A VFD68 drive can control multiple motors wired in parallel; however, the sum of the Full Load Amperes (FLA)

ratings for the motors must not exceed the maximum output amperage rating of the VFD68 drive, including any

de-rating due to altitude. See Table 2 on page 6 for de-rating information.

Location Considerations

IMPORTANT: Frequently starting and stopping the VFD shortens the lifespan of the VFD68 drive. In

applications where the drive will start or stop frequently, select a VFD which has an output current rating that

is 1.5 to 2 times greater than the FLA current rating of the three-phase motor.

IMPORTANT: When selecting the motor, do not exceed the maximum ampere rating of the

VFD68 drive.

IMPORTANT: Do not control both single-phase and three-phase motors with the same VFD68 drive.

WARNING: Risk of Fire or Electric Shock.

Install the device in an environment relatively free of contaminants such as dust, condensation, or

chemical agents. A dirty or damp environment may cause an electric arc across contaminated

terminals.

AVERTISSEMENT: Risque de décharge électrique ou incendie.

Installer l'appareil dans un environnement présentant une quantité réduite de contaminants tels que

de la poussière, de la condensation ou des agents chimiques. Un environnement pollué ou humide

risque d'entraîner la formation d'un arc électrique entre des bornes contaminées.

CAUTION: Risk of Property Damage.

The VFD68 Drive can generate and dissipate significant heat. Mount the VFD68 Drive on a metal,

concrete, or cinder block mounting surface. Mounting the VFD68 Drive on surfaces made of wood

or other heat-sensitive material may result in damage to the mounting surface.

MISE EN GARDE: Risque de dégâts matériels.

Le VFD68 Drive peut générer et émettre une chaleur importante. Installer le VFD68 Drive sur une

surface de montage en métal, en béton ou en parpaings. L'installation du VFD68 Drive sur une

surface en bois ou composée de matériaux sensibles à la chaleur risque d'endommager la surface

de montage.

VFD68 Variable Frequency Drives (230 or 460 VAC)

Observe the following location guidelines:

• Ensure that the mounting surface can support the drive, mounting hardware, and any user-supplied panel

or enclosure.

• Mount drives on flat, even surfaces.

• Allow sufficient space for wires and connections.

• Do not mount the modules on surfaces that are prone to vibration or in locations where radio frequency or

electromagnetic emissions may cause interference.

• Do not install the modules in airtight enclosures.

• Do not install heat-generating devices that may cause the temperature to exceed the ambient operating

limit in the same enclosure as the modules.

The VFD68 drive has been approved for use in an enclosure. Approval tests were conducted under the

conditions in Table 2.

When mounting the VFD68 drive in an enclosure, ensure that the specified space around the drive is

maintained, and that the ambient conditions are within the specified limits.

IMPORTANT: The VFD68 drive is intended to be mounted in an enclosure that only allows access

by trained and authorized personnel, and that prevents the ingress of contamination. It is designed for

use in an environment classified as pollution degree 2 in accordance with IEC 60664-1. This means that

only dry, non-conducting contamination is acceptable.

Table 2: Environmental Considerations

Surrounding Air

Temperature1

1. Surrounding air temperature is a temperature measured at a measurement position in an enclosure. Ambient air

temperature is a temperature outside an enclosure.

-40 to 50°C (-40 to 122°F)

as measured 5 cm from the VFD

Ambient Humidity 90% RH or less (noncondensing)

Storage Temperature -40 to 65°C (-40 to 149°F)

Atmosphere Indoors (no corrosive and flammable gases, oil mist, dust and dirt.)

Altitude Limit2: Below 1,000 m (3,280 ft) above sea level

2. Altitude limit given is for standard operation of the VFD. For operation at higher altitudes, derate by 3% for each 500 m

(1,640.4 ft), up to a maximum of 2,500 m (8,202 ft) (91% derating).

Vibration Limit: 5.9 m/s2(19.4 ft/s2)or less at 10–55 Hz (directions of x, y, z axes)

VFD68

x = Measurement Position

5 cm

(

2 in.)

5 cm

(2 in.)

5 cm

(2 in.)

FIG:temp_loc_diag

VFD68 Variable Frequency Drives (230 or 460 VAC)

Dimensions

Table 3: Three-Phase 230 VAC Models, mm (in.)

VFD Model HH1 WW1 D

VFD68BBB 128 (5.04) 118 (4.65) 68 (2.68) 56 (2.20) 80.5 (3.17)

VFD68BCB

VFD68BDC 112.5 (4.43)

VFD68BFD 132.5 (5.22)

VFD68BGG 108 (4.25) 96 (3.78) 135.5 (5.34)

VFD68BHG

VFD68BJK 170 (6.69) 158 (6.22) 142.5 (5.61)

VFD68BKL 150 (5.91) 138 (5.43) 220 (8.66) 208 (8.19) 155 (6.10)

VFD68BLL

VFD68BMP 260 (10.23) 244 (9.61) 220 (8.66) 195 (7.68) 190 (7.48)

VFD68BNP

Table 4: Three-Phase 460 VAC Models, mm (in.)

VFD Model HH1 WW1 D

VFD68CDF 128 (5.04) 118 (4.65) 108 (4.25) 96 (3.78) 129.5 (5.10)

VFD68CFF

VFD68CGG 135.5 (5.34)

VFD68CHH 155.5 (6.12)

VFD68CJJ 165.5 (6.52)

VFD68CKL 150 (5.91 138 (5.43) 220 (8.66) 208 (8.19) 155 (6.10)

VFD68CLL

VFD68CMP 260 (10.23) 244 (9.61) 220 (8.66) 195 (7.68) 190 (7.48)

VFD68CNP

Figure 2: Dimensions for VFD68 Drives, 230–460 VAC Models

VFD68 Variable Frequency Drives (230 or 460 VAC)

Mounting

1. Loosen the screws on the front cover and remove the cover (Figure 3).

2. Remove the high-voltage wiring cover at the bottom of the VFD68 drive (Figure 4).

Figure 3: Loosen the Cover Screws and Remove the Front Cover

Cover

Screws

Cover

Screw

1) 2)

Cover

Latch

FIG:cvr_rmvl

Figure 4: Remove the High-Voltage Wiring Cover

Guide

Wiring

Cover

Guide

Wiring

Cover

Warning: Risk of Electric Shock

FIG:RMV_CVR

VFD68 Variable Frequency Drives (230 or 460 VAC)

Mount the VFD vertically (Figure 5) in an acceptable NEMA-rated enclosure on a non-flammable surface.

When you drill mounting holes and mount the VFD, ensure that you do not allow metal chips or other material

to enter the VFD housing.

See Figure 6 and Table 5 for mounting space requirements.

Table 5: Required Clearance

Dimension 3.7 kW (5 HP) or Less 5.5–7.5 kW (7-1/2 to 10 HP)

A100 mm (4 in.) or more 100 mm (4 in.) or more

B10 mm (7/16 in.) or more 50 mm (2 in.) or more

Figure 5: Mounting the VFD68 Drive

2 to 10 HP, 230 VAC

1/2 to 10 HP, 460 VAC

1/8 to 1 HP, 230 VAC

Front cover

Wiring cover

Front cover

Wiring cover

FIG:VFD68_instll

Figure 6: Required Clearance for Mounting Inside an Enclosure

5.5 to 7.5 kW (7-1/2 to 10 HP)

FIG:clrnc_rqrd

Side

VFD

3.7 kW (5 HP) or Less

Front

VFD VFD

Side

Front

VFD VFD VFD

AAA

BBBC

VFD68 Variable Frequency Drives (230 or 460 VAC)

Wiring

WARNING: Risk of Electric Shock.

Disconnect the power supply before making electrical connections. Contact with components

carrying hazardous voltage can cause electric shock and may result in severe personal injury or

death.

AVERTISSEMENT: Risque de décharge électrique.

Débrancher l'alimentation avant de réaliser tout branchement électrique. Tout contact avec des

composants porteurs de tensions dangereuses risque d'entraîner une décharge électrique et de

provoquer des blessures graves, voire mortelles.

WARNING: Risk of Electric Shock.

Do not touch any exposed metal parts with anything other than properly insulated tools or insulated

probes of the digital voltage meter. Failure to use properly insulated tools and probes may result in

severe personal injury or death.

AVERTISSEMENT: Risque de décharge électrique.

Ne jamais toucher une partie métallique exposée avec tout élément autre que des outils

correctement isolés ou les sondes isolées du voltmètre numérique. L'utilisation d'outils et de sondes

incorrectement isolés risque de provoquer des blessures graves, voire mortelles.

WARNING: Risk of Electric Shock.

To avoid possible electric shock, wait at least 10 minutes after the AC supply power has been

disconnected from the VFD68 Drive before servicing the device. The VFD68 Drive remains

electrically charged for a period of time after power is removed. Failure to wait until the VFD68 Drive

fully discharges could cause electric shock, personal injury, or death.

AVERTISSEMENT: Risque de décharge électrique.

Afin d'éviter tout risque de décharge électrique, attendre au moins 10 minutes après la déconnexion

de l'alimentation CA du VFD68 Drive pour intervenir sur l'appareil. Le VFD68 Drive reste chargé

électriquement pendant un certain temps après la coupure de son alimentation. Le non-respect du

délai de décharge électrique complète du VFD68 Drive peut entraîner une décharge électrique

provoquant des blessures graves, voire mortelles.

CAUTION: Risk of Property Damage.

Do not apply power to the system before checking all wiring connections. Short circuited or

improperly connected wires may result in permanent damage to the equipment.

MISE EN GARDE: Risque de dégâts matériels.

Ne pas mettre le système sous tension avant d'avoir vérifié tous les raccords de câblage. Des fils

formant un court-circuit ou connectés de façon incorrecte risquent d'endommager irrémédiablement

l'équipement.

CAUTION: Risk of Property Damage.

Do not run low-voltage cable in the same conduit or wiring troughs with high-voltage wires. Running

low-and high-voltage wires in the same conduit or wiring troughs may damage the equipment or

cause system malfunction.

MISE EN GARDE: Risque de dégâts matériels.

Ne pas faire courir un câble basse tension dans les mêmes gaines ou goulottes électriques que des

câbles haute tension. L'installation de fils basse tension et haute tension dans les mêmes gaines ou

goulottes électriques risque d'endommager l'équipement ou de provoquer des dysfonctionnements

du système.

IMPORTANT: Use copper conductors only. Make all wiring in accordance with local, national, and

regional regulations.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Penn Gleichstromantrieb Handbücher

Penn

Penn VFD68D Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung