Step 2
When moving the Phenom Noir, it is recommended for
a 2 person lift. If you try and move it by yourself,
please make sure the door is facing away from you as
the UV acrylic shield could break with the weight if it
the door is pressed against your chest while moving
the printer.
Place the Phenom Noir on a level and sturdy surface.
If you have a level, you can place it on the top of the
printer to ensure the printer is sitting level.
Keep in mind that the printer is large, (46.5 X 37 X
78cm / 18.3 x 14.5 x 30.7 inches) and is heavy (45kg /
99.2 pounds). Please make sure the area you put the
printer on can support the weight and provide enough
space for proper ventilation for the printer.
Also consider that you will need a washing and curing
station near the printer when planning out your set up.
