Pepperl+Fuchs KFU8-DW-1.D Bedienungsanleitung

KFU8-DW-1.D

Rotational speed monitor

FACTORY AUTOMATION

MANUAL

With regard to the supply of products, the current issue of the following

document is applicable: The General Terms of Delivery for Products and

Services of the Electrical Industry, published by the Central Association of

the ElectricalIndustry (Zentralverband Elektrotechnik und Elektroindustrie

(ZVEI) e.V.) in its most recent version as well as the supplementary

clause: "Expanded reservation of proprietorship"

KFU8-DW-1.D

Contents

129506 2012-12

1 Introduction....................................................5

2 Declaration of conformity .............................7

3 Safety ..............................................................8

3.1 Symbols relevant to safety ................................................8

3.2 Intended use.....................................................................9

3.3 General safety instructions................................................9

4 Product Description ....................................11

4.1 Device description ..........................................................11

5 Operation......................................................15

5.1 Operating mode..............................................................15

5.2 Setup mode ....................................................................17

5.3 Timer functions, reversing the detection direction of the

output relay .....................................................................21

6 Service and Maintenance ...........................27

129506 2012-12

KFU8-DW-1.D

Contents

7 Appendix ......................................................28

7.1 Technical data.................................................................28

7.2 Terminal assignment.......................................................33

7.3 Dimensions, operating and display devices ....................34

7.4 Connection diagram .......................................................35

7.5 Functional description.....................................................36

KFU8-DW-1.D

Introduction

129506 2012-12

1Introduction

Congratulations

You have chosen a device manufactured by Pepperl+Fuchs.

Pepperl+Fuchs develops, produces and distributes electronic

sensors and interface modules for the market of automation

technology on a worldwide scale.

Before you install this device and put it into operation, please read the

operating instructions thoroughly. The instructions and notes

contained in this operating manual will guide you step-by-step

through the installation and commissioning to ensure the trouble-free

usage of this product. This is useful to you, because with this you:

■support the safe operation of the device

■can utilize the device’s entire range of functions

■reduce faulty operation and the associated errors

■reduce costs from downtime and incidental repairs

■increase the effectiveness and operating efficiency of your

plant.

Store this operating manual somewhere safe in order to have it

available for future work on the device.

Directly after opening the packaging, please ensure that the device is

intact and that the package is complete.

129506 2012-12

KFU8-DW-1.D

Introduction

Symbols used

The following symbols are used in this manual:

Handling instructions

This symbol denotes handling instructions.

Contact

If you have any questions about the device, its functions, or

accessories, please contact us at:

Pepperl+Fuchs GmbH

Lilienthalstraße 200

68307 Mannheim

Telephone: +49 621 776-4411

Fax: +49 621 776-274411

E-Mail: fa-info@pepperl-fuchs.com

Note!

This symbol brings important information to your attention.

KFU8-DW-1.D

Declaration of conformity

129506 2012-12

2 Declaration of conformity

This product was developed and manufactured under observance of

the applicable European standards and guidelines.

The product manufacturer, Pepperl+Fuchs GmbH, D-68307

Mannheim, has a certified quality assurance system that conforms to

ISO 9001.

Note!

A Declaration of Conformity can be requested from the manufacturer.

ISO9001

129506 2012-12

KFU8-DW-1.D

Safety

3Safety

3.1 Symbols relevant to safety

Danger!

This symbol indicates a warning about an immediate possible danger.

In case of ignoring the consequences may range from personal injury

to death.

Warning!

This symbol indicates a warning about a possible fault or danger.

In the event the warning is ignored, the consequences may course

personal injury or heaviest property damage.

Do not proceed beyond a warning notice until the indicated

conditions are fully understood and met. Refer to this manual for

specific Warning or Caution information.

Caution!

This symbol indicates a warning about a possible fault.

In case of ignoring the devices and any connected facilities or

systems may be interrupted or fail completely.

KFU8-DW-1.D

Safety

129506 2012-12

3.2 Intended use

The KFU8* series comprises a range of devices used to display and

monitor periodic signals. The devices can be used as a control

cabinet module or for field applications. Use wiring designed

specially for the devices.

3.3 General safety instructions

Installation and commissioning of all devices must be performed by a

trained professional only.

Always operate the device as described in these instructions to

ensure that the device and connected systems function correctly. The

protection of operating personnel and plant is only guaranteed if the

device is operated in accordance with its intended use.

The devices fulfill a degree of protection IP 20 according to IEC/EN

60529.

When packing the device for storage or transport, use materials that

will protect the device from bumps and impacts and protect against

moisture. The original packaging provides the best protection. Also

take into account the permitted ambient conditions.

The operating company bears responsibility for observing locally

applicable safety regulations.

129506 2012-12

KFU8-DW-1.D

Safety

User modification and or repair are dangerous and will void the

warranty and exclude the manufacturer from any liability. If serious

faults occur, stop using the device. Secure the device against

inadvertent operation. In the event of repairs, return the device to your

local Pepperl+Fuchs representative or sales office.

Andere Handbücher für KFU8-DW-1.D

Inhaltsverzeichnis

Andere Pepperl+Fuchs Industrieanlagen Handbücher

Pepperl+Fuchs

Pepperl+Fuchs EI-0D2-10Y-10B-LT Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs LS68 DA-F2 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs BEBCO EPS 1002 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PGV100RS-F200-B16-1,5M Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PGV -F213-B16-1.5M Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VisuNet EX2 GMPRM/PC 3700 Series Handbuch

Pepperl+Fuchs

Pepperl+Fuchs LS684 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs WITTSensoric LIGI-01 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VisuNet RM Shell 6 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs 7500 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs 6000 SERIES Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PCV F200-R4-V19 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs R2-SP-N Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs MLV12-54-LAS-300/76b/95 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs KFD2-CD-1.32 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs KCD2-SLD-Ex1.1045 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs FieldConnex KFD2-BR-1.PA.1500 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PGV100R-F200-R4-1.5M Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs Absolute Rotary Encoder Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PGV100R-F200-B16 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VisuNet Control Center 6 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs FD0-VC-Ex4.FF Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs SIL KCD2-SCS-2 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PXV80AQS-F200-R4-V19 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Rioned

Rioned UrbanJet Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung