Perenio PEIRC01 Bedienungsanleitung

Installation and Operation Manual

for Perenio® PEIRC01

Indoor Motor Camera

July, 2021

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 3of 48

Introduction

Perenio® Cameras are specially designed for indoor monitoring. They are used as

part of the Perenio Smart Building Management System for the purpose of video

surveillance and recording.

Such Cameras allow Users to control and hear everything happening in the area of

interest. A high-quality (Full HD) video can be maintained under poor lighting

conditions which makes sense for video recording and imaging at night.

The present Manual contains a detailed description of the device, as well as instructions

for its installation and operation.

Copyrights

The Perenio® trademark is owned by Perenio IoT spol s r.o. (hereinafter referred to

as the Perenio IoT). All other similar trademarks and names, as well as logos and other

symbols are the property of their respective owners*.

All materials under Perenio® tradename contained therein are protected in

accordance with international and local laws including Acts on copyrights and related

rights.

Any reproduction, copying, publication, as well as further distribution or public display

of materials contained in the present document (whether in full or in part) shall not be

allowed until an appropriate permission of the copyright owner is obtained. Any

unauthorized usage of materials contained herein may lead to civil liability and criminal

prosecution in accordance with applicable laws.

Any eventual mentioning of other company names and equipment in the present

document is made solely for the purpose of clarifying and describing the device

operation and shall not infringe on the third party’s intellectual property rights.

*ZIGBEE is the registered trademark of ZigBee Alliance; iOS is the registered trademark of CISCO TECHNOLOGY, INC.;

Android is the registered trademark of Google Inc.; Google Play is the trademark of Google Inc.; App Store is the

registered trademark of Apple Inc.; Linux is the registered trademark of Linus Torvalds.

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 4of 48

Responsibility and Technical Support

The present document is prepared in accordance with all necessary requirements and

contains detailed information on the device installation, configuration and control valid

as of the date of its issue.

Perenio IoT reserves the right to modify the device and make corrections or changes

to this document without prior notice of the User, and shall not be responsible for any

potential negative consequences which may arise from the use of an outdated version

of the document, as well as for any possible technical and/or typographical errors,

either omitted or accidental, or any related damage that may result from the document

transfer or the use of devices.

Perenio IoT shall make no guarantee with respect to any data contained herein

including but not limited to the device merchantability and fitness for a particular

purpose.

In case of any discrepancies between language versions of this document, the Russian

version of this User Manual shall prevail.

For any technical issues, please contact your local Perenio IoT representative or the

Tech Support Department at perenio.com.

The most common problems may be found in Section 7 of the present document and

at perenio.com where you can also download the latest version of this Installation

and Operation Manual.

Manufacturer:

Perenio IoT spol s r.o.

Na Dlouhem 79, Ricany –Jazlovice 251 01, Czech Republic

perenio.com

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 5of 48

Conformance to Standards

The device is CE certified and complies with requirements of the

following Directives of the European Union:

2014/53/EU Radio Equipment Directive (RED);

2014/35/EU Low Voltage Directive;

2004/30/EC Electromagnetic Compatibility Directive.

The device complies with the UKCA marking requirements for

selling the device in the UK

The device has passed all procedures of assessments established

in Technical Regulations of the Customs Union and conforms with

standards of the Customs Union

The device complies with the requirements of Restriction of the Use

of Certain Hazardous Substances in Electronic and Electrical

Equipment (2011/65/EU Directive)

The device complies with requirements of the Technical Regulations

of the Republic of Belarus TR 2018/024/BY (Telecommunications.

Security)

The external power source complies with STB 2463-2020 where

requirements for the environmental design of external power

sources in the area of average effective efficiency and power

consumption in idle mode are established

The national conformity mark of the Ukraine indicating that the

device meets requirements of all applicable technical regulations

The crossed-out trash can symbol is used to label electrical and

electronic equipment, and indicates its separate collection.

The symbol is given in accordance with the Directive 2012/19/EU

on Waste Electrical and Electronic Equipment (WEEE)* and

indicates that this equipment requires separate collection at the

end of its life and must be disposed of separately from unsorted

household waste.

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 6of 48

To protect the environment and human health, please dispose of

used electrical and electronic equipment according to approved

safe disposal guidelines

Details on available Certificates are specified in

Section 6 of the present document. For copies

of Certificates and Reports, please visit a

corresponding Section at perenio.com.

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 7of 48

Table of Contents

Introduction ..................................................................................................... 3

Copyrights ....................................................................................................... 3

Responsibility and Technical Support................................................................... 4

Conformance to Standards................................................................................. 5

Table of Contents.............................................................................................. 7

1 General Description and Specifications ............................................................. 9

1.1 General Purpose ....................................................................................... 9

1.2 Technical Specification ............................................................................ 12

1.3 Scope of Delivery.................................................................................... 15

1.4 Packaging and Labelling .......................................................................... 16

1.5 Safe Operation Rules .............................................................................. 16

1.6 The Use of Power Adapters ...................................................................... 17

2 Installation and Setup................................................................................... 20

2.1 First Installation and Configuration ........................................................... 21

2.2 Camera Control Panel ............................................................................. 28

2.2.1 Armed Mode ..................................................................................... 29

2.2.2 Event History.................................................................................... 30

2.2.3 Presets............................................................................................. 30

2.2.4 Viewing Saved Videos........................................................................ 31

2.2.5 Additional Settings ............................................................................ 32

2.2.6 Subscriptions.................................................................................... 34

2.3 Upgrading the Camera Firmware .............................................................. 36

2.4 Reset to Factory Settings......................................................................... 36

2.5 Camera Rotation..................................................................................... 37

2.6 Ethernet Connection ............................................................................... 37

2.7 Wi-Fi Router Frequency Settings .............................................................. 37

2.8 The Use of MicroSD................................................................................. 38

2.9 Using the Camera Mic ............................................................................. 39

2.10 Changing the Room or Location for Cameras............................................ 39

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 8of 48

2.11 History and Push-Notifications ................................................................40

3 Maintenance and Repair ................................................................................41

4 Warranty Obligations ....................................................................................42

5 Storage, Transportation and Disposal of Devices..............................................45

6 Other Information.........................................................................................46

7 Troubleshooting............................................................................................47

8 Glossary ......................................................................................................48

Figures and Tables

Figure 1 –Front View.......................................................................................10

Figure 2 –Back View .......................................................................................10

Figure 3 –Viewing Angles ................................................................................14

Figure 4 –Pan/Tilt Angles.................................................................................15

Figure 5 –Scope of Supply...............................................................................15

Figure 6 - Examples of Installation ....................................................................20

Figure 7 –Mounting holes at the bottom of the Camera.......................................22

Figure 8 –Add new device procedure (The Camera activation process) .................27

Table 1 –Basic Technical Specifications .............................................................12

Table 2 –Types of connectors and USB Standards ..............................................18

Table 3 –Buttons and icons of the Camera Control Panel ....................................28

Table 4 –Buttons and icons of the “Recordings” tab............................................31

Table 5 –Available subscriptions.......................................................................35

Table 6 –Typical Errors and Troubleshooting Methods.........................................47

Connection to the Perenio Smart Mobile App

A. INSTALLATION OF THE PERENIO SMART MOBILE APP......................................22

B. DEVICE ACTIVATION BY QR CODE SCANNING ................................................24

C. SENDING WI-FI NETWORK DATA TO THE DEVICE...........................................25

D. LOCATION AND ROOM SETTING ...................................................................26

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 9of 48

1 General Description and Specifications

1.1 General Purpose

The Perenio® PEIRC01 Indoor Motor Camera is specially designed for indoor

monitoring purposes. It can be used both as an independent device and as a part of

the Perenio Smart Building Management System, when various scenarios for

device interaction are activated. A special port allows you to connect external signaling

devices, while the HiSilicon Processor ensures high purity of colored images

throughout the day.

Key features of the Indoor Motor Camera are as follows:

High resolution video: Full HD 1080p, 2Mp;

Wider viewing angle: 90º;

Remote pan/tilt function: 350º/120º;

iOS (12.1 and higher) and Android (5.0 and higher) smartphone compatibility;

Wi-Fi connection;

MicroSD Card slot (up to 64GB);

Real-time video recording;

Setting up of an automatic video recording;

Built-in IR-filter and a Night Vision mode;

Increased visibility at night time;

Motion detection function;

Arm/Disarm mode;

Alarms and Push-notifications.

Installation and Operation Manual for

Perenio® PEIRC01 Indoor Motor Camera

Page 10 of 48

Figure 1 –Front View

Figure 2 –Back View

Microphone

IR LED

Panel

PIR Sensor

Camera

Lens

Light

Sensor

RJ-45

Port

Speaker

I/O Alarm

Ports

Power Port

Audio Out

Reset Button

MicroSD

Card Slot

Wi-Fi

Antenna

Andere Handbücher für PEIRC01

Inhaltsverzeichnis

Andere Perenio Digitalkamera Handbücher

Perenio

Perenio PEIRC01 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung