Perfect Prime IR202 Bedienungsanleitung
IR202 Thermal Camera
For Android Devices
Instruction Manual
Contents
P. 1
1. Overview
2. App Download
3. Phone Connection
4. Product Specifications
5. Product Operation
6. Settings
7. Color Palette
8. Emissivity
9. Temperature Display Unit
10. Over and Under Temperature Alarms
2
3
3
4
5 - 6
7
8
9
10
11
1. Overview
P. 2
PerfectPrime provides you a way to sense the invisible, measure
the unfathomable, and analyze the improbable by providing
thermal imaging and temperature measurements in a new way.
This guide provides you all the information you need to operate
the IR202 Thermal Camera for Android devices.
The IR202 is powered by the host device, no charging or battery is needed.
USB-C
Connector
Thermal
Camera
2. App Download
3. Phone Connection
P. 3
Scan the QR code below or enter the URL (https://play.goo-
gle.com/store/apps/details?id=com.meridianin-
no.perfectprime_IR202) to download the "IR202 Thermal
Camera Viewer" application and install it (only supports
Android Phone system).
2. APP DOWNLOAD
After installation, make sure host device supports USB OTG in
your phone’s settings. Once plugged in, the application will
automatically open within 10 seconds. Select the IR202
Thermal Camera Viewer App to start.
3. PHONE CONNECTION
App
QR Code
4. Product Specications
P. 4
4.1. General
Resolution
FOV (angles in degrees)
Maximum frame rate
Max scene temperature range
NETD
Accuracy
80 × 62
44.2° (H), 34.5° (V)
15 FPS
-40°C to 1000°C
150mK
up to +/-1°C
4.2. Environmental
Operating temperature
Storage temperature
-20 - 85°C
-40 - 85°C
4.3. Interface
Power Consumption
Android Dongle connector
Android Dongle size
300mW
USB Type-C
56mm x 30mm x 14mm
4.4. Mechanical
Android Dongle weight 8.5 g
5. Product Operation
P. 5
7
5
13
2
4
8
6
9
10
11 12 13 14 15 16
1
2
4
3
5
6
Mirroring: Tap on this button to ip
the image horizontally
Software Version: This shows the
current version of software.
Settings: Adjust settings such as
color palette, temperature display
unit, emissivity, over temperature
alarm and under temperature alarm.
Dynamic Range:Tap to turn on or
o the dynamic range
Filter: Tap to turn on or o the lter.
User can control several image
ltering to reduce noise level of the
temperature data. It gives better
performance once these are turned
on at run time. Swipe the page
indicator to second page, adjust
lters by dragging the correspond-
ing bar.
Color Bar: The color bar shows the
color palette you have chosen to use.
5. Product Operation
P. 6
7
8
12
11
10
9
13
16
15
14
Min & Max Temperature: The minimum and maximum temperature
of the detected area will be shown.
Center Point Temperature: This shows the temperature of the center
point.
Thermal Image
Visible Camera Image
Check Images and Videos: Tap to view images and videos taken
previously
Take Photo: Tap on this to take a photo.
Take Video: Tap on this to start recording a video. Tap again to end
video recording.
Switch between Thermal Image and Visible Camera Image: Tap on
this button to switch the position of the thermal image and visible
camera image
Over Temperature Alarm: If the over temperature alarm is turned on
in the settings and the detected temperature goes above the set
temperature, the alarm will be triggered and this part would turn red.
Under Temperature Alarm: If the under temperature alarm is turned
on in the settings and the detected temperature goes below the set
temperature, the alarm will be triggered and this part would turn
blue.
6. Settings
P. 7
Within the settings, you can
adjust variables including the
color palette, temperature
display unit, emissivity, over
temperature alarm and under
temperature alarm.
7. Color Palette
P. 8
16 preset color palettes are
provided for visualization
purpose, temperature data is not
aected. Tap the palette list,
select one of the palettes on the
drop-down list and result will be
applied on the new thermal
image.
8. Emissivity
P. 9
It quanties the ability of an
objects surface to emit
long-wave infrared radiation and
strongly aects the temperature
readout from the IR202. Most of
the objects with matt surface is
about 0.95 as well as human skin
(0.95 – 0.97). Metals tend to have
dramatically lower emissivity,
sometimes as low as 0.1
according to their surface
processing.
Inhaltsverzeichnis
Andere Perfect Prime Wärmebildkamera Handbücher
Perfect Prime
Perfect Prime IR203 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0005 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0019 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0005 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0002 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0018 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0002 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0018 Bedienungsanleitung
Perfect Prime
Perfect Prime IR0280H Bedienungsanleitung
Perfect Prime
Perfect Prime IR281 Bedienungsanleitung
