Performax 242-1452 Bedienungsanleitung

541-242

traCgnidleW

Owner’s Manual

Weight Capacity

100 lbs

Overall Dim.

28″H x 27-3/4″D x 15-1/2″W

Important Safety Information .…………………………………………………….

Assembly Instructions ……………………………………………………………..

Operation …………………………………………………………………………..

Parts List and Diagram ……………………………………………………………..

Warranty ……………………………………………………………………….………

TABLE

TABLE OF

OF CONTENTS

CONTENTS

Maintenance …………………………………………………………………………

Important Safety Information

Assembly Precautions

Assemble only according to these

instructions. Improper

assembly

can

create hazards.

Wear ANSI-approved safety

goggles

and heavy-duty

work

gloves

during assembly.

Keep assembly area clean and well lit.

Keep bystanders out of the

area during

assembly.

Do not assemble when tired

or when under the influence

of drugs or medication.

Weight capacity and other product

capabilities apply to properly and

completely assembled product only.

Use Precautions

This product is not a toy. Never allow

children to play or come near this item.

Inspect before every use; do not use

if parts are loose or damaged.

Do not exceed listed weight capacity,

evenly distributed and balanced.

Be aware of dynamic loading!

Sudden load movement may

briefly create excess load

causing product failure.

Maintain product labels and

nameplates. These carry

important safety information.

Operate and store the Cart on

a flat, dry, level surface.

Read welding equipment

manual before use.

If using gas cylinders, be especially

careful to prevent tipping or damage

to the cylinders. Follow gas cylinder

supplier’s and gas supplier’s

safety instructions at all times.

Only use as intended.

Assembly Instructions

Read the

ENTIRE

IMPORTANT SAFETY INFORMATION

section at the

beginning of this document including all text under subheadings therein

before set up or use of this product.

Note:

When attaching hardware, hand tighten only until the unit

together,

then use the appropriate tools to tighten all hardware.

Put a Wheel

(2) on the end of the

Axle

(9) and secure it with Washer

and Cotter Pin

(11). See

Figure

Repeat on the other side.

Figure

Wheel Attachment

Using four Bolts, Washers, and

Nuts

(10), attach a Caster

(3)

to the Bottom Shelf

(1). See

Figure

B. Repeat on other side.

Figure

Caster (3) Attachment

Connect the bottom (note the hole

locations in the diagram) of the

Left

Support (7a) to the Bottom

Shelf

(1)

using Bolts, Washers, and Nuts

(10).

See

Figure

C. Repeat on other

side with Right Support

(7b).

Figure

Connection of Bottom

Shelf

(1)

and Left Support (7a)

Attach the Middle Shelf (5) to the Left

and Right Supports (7a,7b) using

Bolts, Washers, and Nuts

(10).

Place a Hook

(8) over the holes on the

outside of the top of a Support

(7a/7b),

and place the Bolts (10) through both

the Hook

(8), Support (7a/7b), and the

Top Shelf (6). Secure with Washers

and Nuts

(10). Repeat on other side.

Attach the Back Panel (4) to the

Bottom Shelf (1) using Bolts,

Washers, and Nuts

(10).

Attach the Back

Panel

(4) to the Middle

Shelf

(5) and the Top Shelf

(6) using

Bolts, Washers, and Nuts

(10).

Insert the Chains (13) through the

holes in the Back Panel (4).

Wrench tighten all of the hardware.

Parts List and Diagram

Part

Description

Qty

Bottom Shelf Asm.

Wheel

Swivel Caster

Back Panel

Middle Shelf

Top Shelf

Left Support

Part

Description

Qty

Right Support (not shown)

Hook

Axle

Bolt, Washer, Nut (set) M6x12

Flat Washer, Cotter Pin (set)

Cap

Chain

Operation

Make sure that the welder and all

accessories combined do not exceed

the weight capacity of this cart.

Place any gas cylinders on the

back shelf, and secure in place with

both chains. Adjust chains’ length

to hold the cylinder(s) securely.

Place the welder on the top

shelf and the other accessories

on the other shelves.

Make sure everything is secure

and the cart is well balanced.

the

welder is unstable or does

not fit securely on the shelf, do not

use that welder with this cart.

Maintenance

Periodically tighten all of the hardware.

Make sure the casters and wheels

are free of all dirt, debris, or grease.

PERFORMAX

PERFORMAXTM

WARRANTY

30-DAY

30-DAY MONEY

MONEY

MONEY BACK

BACK

BACK GUARANTEE:

GUARANTEE:

This PERFORMAX brand welding cart carries our 30-Day Money Back

Guarantee. If you are not completely satisfied with your PERFORMAX brand

welding cart for any reason within thirty (30) days from the date of purchase,

return the welding cart with your original receipt to any MENARDS retail store,

and we will provide you a refund – no questions asked.

2-YEAR

2-YEAR LIMITED

LIMITED

LIMITED WARRANTY:

WARRANTY:

This PERFORMAX brand welding cart carries a 2-Year Limited Warranty to the

original purchaser. If, during normal use, this PERFORMAX welding cart breaks

or fails due to a defect in material or workmanship within two (2) years from the

date of original purchase, simply bring this welding cart with the original sales receipt

back to your nearest MENARDS®

retail store. At its discretion, PERFORMAX

agrees to have the welding cart or any defective part(s) repaired or replaced with

the same or similar PERFORMAX product or part free of charge, within the stated

warranty period, when returned by the original purchaser with original sales

receipt. Not withstanding the foregoing, this limited warranty does not cover any

damage that has resulted from abuse or misuse of the Merchandise. This

warranty: (1) excludes expendable parts ; (2) shall be void if this welding cart

isused for commercial and/or rental purposes; and (3) does not cover any losses,

injuries to persons/property or costs. This warranty does give you specific legal

rights and you may have other rights, which vary from state to state. Be careful,

welding carts are dangerous if improperly used or maintained. Seller’s employees

are not qualified to advise you on the use of this Merchandise. Any oral

representation(s) made will not be binding on seller or its employees. The rights

under this limited warranty are to the original purchaser of the Merchandise and

may not be transferred to any subsequent owner. This limited warranty is in lieu

of all warranties, expressed or implied including warranties or merchantability

and fitness for a particular purpose. Seller shall not be liable for any special,

incidental, or consequential damages. The sole exclusive remedy against the

seller will be for the replacement of any defects as provided herein, as long as

the seller is willing or able to replace this product or is willing to refund the

purchase price as provided above. For insurance purposes, seller is not allowed

to demonstrate any of these power tools for you.

For questions / comments, technical assistance or repair parts –

Please Call Toll Free at: 1-866-915-8626 (M-F 9am-5pm EST)

SAVE

SAVE YOUR

YOUR

YOUR RECEIPTS.

RECEIPTS.

RECEIPTS. THIS

THIS

THIS WARRANTY

WARRANTY

WARRANTY IS

IS VOID

VOID

VOID WITHOUT

WITHOUT

WITHOUT THEM.

THEM.

15/09/2014

Distributed by: Menard, Inc., Eau Claire, WI 54703

WELDING CART

Inhaltsverzeichnis

Beliebte Outdoor-Wagen Handbücher anderer Marken

Costway

Costway TH10057 Bedienungsanleitung

Vivo

Vivo CART-PC02S Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV42-3162-1 Bedienungsanleitung

VEVOR

VEVOR SC01 Bedienungsanleitung

Carts Vermont

Carts Vermont 20 Bedienungsanleitung

Vivo

Vivo CART-PC01 Bedienungsanleitung

Costway

Costway TL0400 Bedienungsanleitung

XPOtool

XPOtool 30261 Bedienungsanleitung

Branick

Branick 130 Gebrauchs- und Pflegehandbuch

Anthro

Anthro PrinterCart Bedienungsanleitung

Westward

Westward 2CZY4 Service-Handbuch

Hupfer

Hupfer TTW/V Bedienungsanleitung

Gorilla Carts

Gorilla Carts GCR-10P Bedienungsanleitung

Numatic

Numatic EcoMatic EM-5 Bedienungsanleitung

Bosch

Bosch XL-Cart Montageanleitung

Tennsco

Tennsco Modular Cart Top Component Assembly Bedienungsanleitung

Makita

Makita DCU601 Bedienungsanleitung

Clam

Clam POLAR TRAILER HD MAX Bedienungsanleitung