Performax 240-3687 Bedienungsanleitung

OPERATING MANUAL

Sliding Compound Miter Saw

240-3687

IMPORTANT:

Read through this operating manual carefully before using this tool. Pay close

attention to all Safety Instructions, Warnings, and Caution sections.Use this

tool properly, and only for its intended use.

Safety symbols in this Manual are used to call attention to possible dangers.

The safety symbols and their explanations require the operator’s full understand-

ing. The safety warnings do not, by themselves, eliminate any danger, and they

are not a substitute for proper accident-prevention measures.

This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey

a safety warning can result in serious injury to the operator or to others. To reduce

the risk of injury, ﬁre, or electric shock, always follow the safety precautions.

TABLE OF CONTENTS

Rules for Safe Operation…………..……………………………….........Page 3

Description…………..…………………………………………............Page 10

Assembly…………..…………………………………………........... . . . Page11

Adjustments…………..………………………………………….........Page 13

Operation…………..…………………………………………..............Page 14

Maintenance…………..……………………………………….............Page 23

Troubleshooting…………..…………………………………….............Page 23

Accessories…………..…………………………………….................. Page 24

Warranty…………..……………………………………………...........Page 25

SPECIFICATIONS

Miter Saw Speciﬁcations:

Model: 240-3687

Motor: 120V~60Hz, 15A

Speed: 5500 RPM, no load

Blade: 10˝ (25.4 cm) (40-tooth) carbide-tipped

Laser: CLASS llla

Laser wavelength: 650 nm

Laser max outpower: ≤ 2.5 mW

sliding length: 8 1/4”

Weight: 38 lb 9 oz (17.5 kg)

Cutting capacity: 3-1/8 x 11-5/8" crosscut at 0° miter, 0° bevel

3-1/8 x 8" miter at 45° miter, 0° bevel

1-1/2 x 11-5/8" bevel at 0° miter, 45° bevel

1-1/2 x 8" compound at 45° miter, 45° bevel

RULES FOR SAFE OPERATION

KNOW THE TOOL

To operate this tool safely, carefully read this Owner’s Manual and all labels

afﬁxed to the Compound Miter Saw before using it, and follow all instructions

contained therein. Keep this Manual for future reference.

IMPORTANT

This tool should only be serviced by a qualiﬁed service technician.

READ ALL INSTRUCTIONS THOROUGHLY

GENERAL SAFETY RULES FOR BENCH TOOLS

WARNING! Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, ﬁre and/or serious

personal injury.

KEEP GUARDS IN PLACE and in working order.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see

that keys and adjusting wrenches are removed from tool before turning it on.

KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp

or wet locations, or expose them to rain. Keep work area well lighted.

KEEP CHILDREN AWAY. All visitors should be kept safe distance from work

area.

MAKE WORKSHOP KID PROOF with padlocks master switches, or by

removing starter keys.

DON’T FORCE TOOL It will do the job better and safer at the rate for which it

was designed.

USE RIGHT TOOL Don’t force tool or attachment to do a job for which it was

not designed.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good

condition. When using an extension cord, be sure to use one heavy enough

to carry the current your product will draw. An undersized cord will cause a

drop in line voltage resulting in loss of power and overheating. Table 1 shows

the correct size to use depending on cord length and nameplate ampere

rating. If in doubt, use the next heavier gage. The smaller the gage number,

the heavier the cord.

Recommended size of extension cords

Tool’s Ampere rating Volts

Total length of cord in feet

Cord size in A. W. G.(minimum)

25’ 50’ 100’ 150’

0-6

120

18 16 16 14

6-10 18 16 14 12

10-12 16 16 14 12

12-16 14 12 Not Recommended

WEAR PROPER APPAREL Do not wear loose clothing, gloves, neckties, rings,

bracelets, or other jewelry which may get caught in moving parts. Nonslip

footwear is recommended. Wear protective hair covering to contain long hair.

ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting

operation is dusty. Everyday eyeglasses only have impact resistant lenses,

they are NOT safety glasses.

SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer

than using your hand and it frees both hands to operate tool.

DON’T OVERREACH. Keep proper footing and balance at all times.

MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and

safest performance. Follow instructions for lubricating and changing

accessories.

DISCONNECT TOOLS before servicing; when changing accessories, such as

blades, bits, cutters, and the like.

REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in

off position before plugging in.

USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for

recommended accessories. The use of improper accessories may cause risk

of injury to persons.

NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if

the cutting tool is unintentionally contacted.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other

part that is damaged should be carefully checked to determine that it will

operate properly and perform its intended function-check for alignment of

moving parts, binding of moving parts, breakage of parts, mounting, and any

other conditions that may affect its operation, A guard or other part that is

damaged should be properly repaired or replaced.

DIRECTION OF FEED. Feed work into a blade or cutter against the direction

of rotation of the blade or cutter only.

NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave

tool until it comes to a complete stop.

ELECTRICAL SAFETY

Grounding instruction: In the event of a malfunction or breakdown, grounding

provides a path of least resistance for electric current that reduces the risk

of electric shock. This tool is equipped with an electric cord that has an

equipment-grounding conductor and a grounding plug. The plug must be

plugged into a matching outlet that is properly installed and grounded, in

accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not ﬁt

the outlet, have a proper outlet installed by a

qualiﬁed electrician.

Use only 3-wired extension cords that have

3-pronged grounding plugs and 3-holed

receptacles that accept the tool’s plug.

Permanently connected tools: This tool should

be connected to a grounded metal permanent

wiring system or to a system that has an

equipment-grounding conductor.

SAFETY PRECAUTIONS FOR LASERS

This miter saw has a built-in laser

light. The laser is a Class IIla and emits

output power of a maximum 2.5mW and

650nm wavelengths. These lasers do

not normally present an optical hazard.

However, DO NOT stare at the beam as

this can cause ﬂash blindness.

CAUTION: The following label is on your tool. It indicates where the saw

emits the laser light. BE AWARE of the laser light location when using. AL-

WAYS MAKE SURE that any bystanders in the vicinity of use are made aware

of the dangers of looking directly into the laser.

WARNING: LASER LIGHT. LASER RADIATION. Avoid Direct Eye Exposure.

DO NOT stare into beam. Only turn laser beam on when the saw is on the

workpiece.

Grounding

pin 120V Grounded outlet

WARNING: Use of controls, adjustments or performance of procedures

other than those speciﬁed in this manual may result in hazardous radiation

exposure.

WARNING: Use of controls, adjustments or performance of procedures

other than those speciﬁed in this manual may result in hazardous radiation

exposure.

WARNING: The use of optical instruments such as, but not limited to,

telescopes or transits to view the laser beam will increase eye hazard.

The laser shall be used and maintained in accordance with the

manufacture’s instruction.

Never aim the beam at any person or an object other than the work piece.

Always ensure the laser beam is aimed at a sturdy work piece without

reﬂective surface. I.e. wood or rough coated surface are acceptable. Bright

shiny reﬂective sheet or the like is not suitable for laser use as the reﬂective

surface could direct the beam back at the operator.

Do not attempt to activate the laser when the tool housing is removed.

The laser is activated by means a button switch independent with the main

switch of the saw.

Do not change the laser light assembly with a different type. Any repairs

must only be carried out by the laser manufacture or authorized service

agent.

Do not attempt to repairs the laser guide by yourself.

Do not attempt to change any parts of the laser guide.

SPECIFIC SAFETY RULES FOR MITER SAW

ALWAYS wear eye protection.

DO NOT operate saw without guards in place.

BE SURE turn off tool and wait for saw blade to stop before moving

workpiece or changing settings.

BE SURE disconnecting power before changing blade or servicing.

DO NOT expose to rain or use in damp location.

WHEN SERVICING, use only identical replacement parts.

ALWAYS ﬁrmly clamp or bolt your miter saw to a secure, stable workbench

or table at approximately hip height.

BE SURE that all adjustments are secure BEFORE making a cut.

ALWAYS make sure that the miter table and saw arm (bevel function) are

locked in position BEFORE operating your saw. Lock the miter table by

securely tightening the miter lock lever. Lock the saw arm (bevel function)

by securely tightening the bevel lock knob.

BE SURE that the blade path is free of nails. ALWAYS carefully inspect

lumber and remove all nails BEFORE cutting.

ALWAYS be sure that the blade clears the workpiece. NEVER start the saw

with the blade touching the workpiece. ALWAYS allow the motor to come

up to full speed BEFORE starting a cut.

SUPPORT long workpiece when cutting to minimize the risk of blade

pinching or kickback. The saw may slip, walk or slide while cutting long or

heavy boards.

NEVER use a length-stop on the free (scrap end) of a clamped workpiece,

NEVER hold onto or bind the free scrap end of the workpiece in any

operation. If work clamp and length stop are used together, THEY MUST

BOTH BE INSTALLED on the SAME SIDE of the saw table to prevent the

saw from catching the loose end and kicking up.

NEVER cut more than one piece at a time. DO NOT STACK more than one

workpiece on the worktable at a time.

AVOID awkward operations and hand positions where a sudden slip could

cause your hand to move into the blade. ALWAYS make sure that you

have good balance. NEVER operate your saw on the ﬂoor or in a crouched

position.

ONLY USE the correct blades. Use the right blade size, style and cutting

speed for the material and the type of cut. DO NOT use blades with

incorrect size holes. NEVER use blade washers or blade bolts that are

defective or incorrect. The maximum blade capacity for this saw is

10-inches.

ALWAYS keep blades clean, sharp and with the sufﬁcient set. Sharp blades

minimize stalling and kickback.

DO NOT use dull or damaged blades. Bent blades can break easily, or cause

kickback.

DO NOT remove the saw’s blade guards. NEVER operate the saw with any

guard or cover removed. MAKE SURE that all guards are operating properly

BEFORE each use.

NEVER hand holds a workpiece that is too small to be clamped. ALWAYS

keep your hands clear of the “no hands” zone.

NEVER perform any operation freehand. ALWAYS place the workpiece to

be cut on the miter saw table and position it ﬁrmly against the fence as a

backstop. ALWAYS use the fence.

NEVER apply lubricants to the blade when it is running. NEVER use

solvents to clean plastic parts. Solvents could possibly dissolve or

otherwise damage the material.

KEEP HAND OUT OF SAW BLADE. DO NOT reach under the material being

cut or in the blade’s cutting path with your ﬁngers or hand for any reason.

DO NOT turn the motor switch on and off rapidly. This could cause the blade

to loosen, which could create a hazard. Should this ever occur, stand clear

and allow the saw blade to come to a complete stop. Disconnect the saw

from the power source and securely tighten the blade bolt.

ALWAYS turn off the saw before disconnecting it to avoid accidental

starting when reconnecting the saw to a power supply. NEVER leave the

saw unattended while connected to a power supply.

KEEP THE MOTOR AIR SLOTS clean and free of chips or dust. To avoid

motor damage, the motor should be blown out or vacuumed frequently to

keep sawdust from interfering with the motor ventilation.

NEVER lift this tool by gripping the cutting handle or the miter fence. This

may cause misalignment. ALWAYS carry saw by holding the base or carry

by the support bracket/carrying handle after you have locked the saw arm

in the “DOWN” position.

ADDITIONAL RULES FOR SAFE OPERATION

WARNING: Use of this tool can generate and/or disburse dust, which

may cause serious and permanent respiratory or other injury. Always

use NIOSH/OSHA approved respiratory protection appropriate for the dust

exposure. Direct particles away from face and body.

Know your power tool. Read operator’s manual carefully. Learn the

applications and limitations, as well as the speciﬁc potential hazards

related to this tool. Following this rule will reduce the risk of electric shock,

ﬁre or serious injury.

ALWAYS wear safety glasses or eye shields when using this saw. Everyday

eyeglasses have only impact-resistant lenses; they are NOT safety glasses.

All users and bystanders MUST wear eye protection that conforms to ANSI

Z87.1

PROTECT your lungs. Wear a face mask or dust mask if the operation is

dusty.

PROTECT your hearing. Wear appropriate personal hearing protection

during use. Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

ALL VISTORS AND BYSTANDERS MUST wear the same safety equipment

that the operator of the saw wears.

INSPECT the tool cords periodically and if damaged have it repaired by

qualiﬁed person.

ALWAYS check the tool for damaged parts. Before further use of the tool, a

guard or other part that is damaged should be carefully checked to determine

if it will operate properly and perform its intended function. Check for

misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the tool’s operation. A guard or other part that is

damaged should be properly repaired or replaced by qualiﬁed person.

INSPECT and remove all nails from lumber before sawing.

SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to

instruct others who may use this tool. If someone borrows this tool, make

sure they have these instructions also.

DESCRIPTION

KNOW THE COMPOUND MITER SAW (See Fig. 1)

Before attempting to use this Compound Miter Saw, become familiar with all of

its operating features and safety requirements.

Fig. 1

1. ON/OFF trigger switch

2. Horizontal, rubberized D-handle

3. Safety lock-off button

4. Upper blade guard

5. Blade-screw guard

6. Dust-extraction port

7. Saw blade

8. Laser guide

9. Mounting holes

10. Miter table

11. Miter-angle scale

12. Throat plate

13. Miter-angle indicator

14. Miter lock

15. Clamp mounting holes

16. Fence

17. Lower blade guard

18. Spindle-lock button

19. Laser ON/OFF switch

20. Stop latch

21. Bevel-angle scale

22. Bevel lock

23. Bevel-angle indicator

24. Extension wings

25. Hold-down clamp

26. Slide lock

27. Slide rail assembly

922

Dust Bag

Dust Bag Adaptor

Blade Wrench

Saw Blade

Shop Vacuum Adaptor

Inhaltsverzeichnis

Andere Performax Gesehen Handbücher

Performax

Performax 9'' Band Saw Bedienungsanleitung

Performax

Performax 90235 Bedienungsanleitung

Performax

Performax 241-0944 Bedienungsanleitung

Performax

Performax COMPACT PX12 LITHIUM-ION Bedienungsanleitung

Performax

Performax 240-3605 Bedienungsanleitung

Performax

Performax 241-0987 Bedienungsanleitung

Performax

Performax 241-0950 Bedienungsanleitung

Performax

Performax 240-3669 Bedienungsanleitung

Performax

Performax 241-0995 Bedienungsanleitung

Performax

Performax 240-3756 Bedienungsanleitung

Performax

Performax 240-3688 Bedienungsanleitung

Performax

Performax 241-0985 Bedienungsanleitung

Performax

Performax 241-0932 Bedienungsanleitung

Performax

Performax 240-3600 Bedienungsanleitung

Performax

Performax 241-0988 Bedienungsanleitung

Performax

Performax 240-3680 Bedienungsanleitung

Performax

Performax 241-0951 Bedienungsanleitung

Performax

Performax 240-3724 Gebrauchs- und Pflegehandbuch

Performax

Performax 241-0991 Bedienungsanleitung

Performax

Performax 241-0968 Bedienungsanleitung

Performax

Performax 240-3690 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung