Perlick HP15 Bedienungsanleitung

PERLICK RESIDENTIAL UNDERCOUNTER REFRIGERATION

To prevent appliance damage or injury, read these instructions

thoroughly prior to installation.

UNDERCOUNTER

INSTALLATION

INSTRUCTIONS

HP15 15”SIGNATURE SERIES

HP24 24”SIGNATURE SERIES

HH24 SIGNATURE SERIES SHALLOW DEPTH

HC24 C-SERIES

HA24 ADA-COMPLIANT SERIES

R600a Refrigerant

Form No. Z2667-A

Rev. 12.15.2020

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

2| perlick.com/residential

Warranty

To register your product, visit our web site at www.perlick.

com. Click on “Residential”, then “Resources”. Click on the

link “Warranty Registration Form”. You must complete and

submit this form or the installation date will revert back to

the ship date.

Please record the purchase date and the dealer’s name,

address and telephone number below.

Model Number: ________________________________

Serial Number: _________________________________

Purchase Date: _________________________________

Dealer Name & Address __________________________

______________________________________________

Phone Number _________________________________

Introduction

Congratulations on your purchase of a Perlick Residential

undercounter product. This manual has been prepared

to assist you in the installation of your cabinet and to

acquaint you with its operation and maintenance.

This manual has been prepared to assist you in the

installation of your under counter refrigerator and to

acquaint you with its operation and maintenance.

We dedicate considerable time to ensure that our products

provide the highest level of customer satisfaction. If

service is required, your dealer can provide you with a list

of qualied service agents. For your own protection, never

return merchandise for credit without our approval.

We thank you for selecting a Perlick product and assure

you of our continuing interest in your satisfaction.

GENERAL INFORMATION

TABLE OF CONTENTS

General Information................................................................................................................................................................................2

Safety ............................................................................................................................................................................................................3

Refrigerant..................................................................................................................................................................................................3

Prior To Installation ..................................................................................................................................................................................3

Preparing the Cabinet for Use

Uncrating and Inspection ..............................................................................................................................................................4

Electrical...............................................................................................................................................................................................4

Use and Operation...................................................................................................................................................................................4

Repair & Maintenance ............................................................................................................................................................................5

Installing Casters or Legs.......................................................................................................................................................................5

Installation ..................................................................................................................................................................................................5

Preparing the Space ................................................................................................................................................................................6

Placing the Cabinet..........................................................................................................................................................................6

Installing the Unit.....................................................................................................................................................................................6

Toe Plate Installation........................................................................................................................................................................7

Adjusting Full Extension Shelving ..............................................................................................................................................8

Door Options/Adjustment.............................................................................................................................................................8

Handle/Lock Installation ............................................................................................................................................................. 11

Overlay Installation ....................................................................................................................................................................... 12

Touch-Screen Control Operation..................................................................................................................................................... 15

Checking Product Temperature................................................................................................................................................ 15

Digital Temperature Control ...................................................................................................................................................... 15

Programming Button Denitions ............................................................................................................................................ 15

LED Functions ................................................................................................................................................................................. 15

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

Perlick customer service (800)558-5592 | 3

IMPORTANT!

Read and understand all information in this manual before attempting the installation. All plumbing

and electrical work must be performed by a qualied technician and conform to all applicable state

and local codes.

SAFETY

PLEASE READ all instructions completely before

attempting to install or operate the unit. Take particular

note of the DANGER, WARNING and CAUTION information

in the manual. The information is important for the safe

and ecient installation, operation and care of your Perlick

unit.

DANGER

Indicates a hazard that WILL result

in serious injury or death if

precautions are not followed.

WARNING

Indicates a hazard MAY cause

serious injury or death if

precautions are not followed.

CAUTION

Indicates a hazard where minor

or moderate injury may occur if

precautions are not followed.

NOTICE

Indicates that property damage

may occur if warnings or

instructions are not followed.

Refrigerant

DANGER

Take caution when handling,

moving and using the product to

avoid damaging the refrigerant tubing or increasing

the risk of a leak

WARNINGAll service work shall be

performed by factory authorized

service personnel and all component parts shall be

replaced with like components to minimize the risk of

possible ignition due to incorrect parts or improper

service.

CAUTIONIf service is necessary, repair work

must be performed by a Perlick

authorized servicer. Work done by unqualied

individuals could potentially be dangerous and will

void the warranty.

NOTICE

This product contains blown foam

insulation using blowing agent

R-611 (Methyl Formate). The foam in this product

does not contain HFC’s, CFC’s, or HCFC’s.

All models covered in this user manual are manufactured

usingrefrigerantR600a(Isobutane).R600aisahydrocarbon.

This refrigerant is ammable and is only allowed for use in

appliances with fulll the requirements of UL/IEC 60335-1

and UL/IEC 60335-2-24. (To cover potential risk originated

from the use of ammable refrigerants). Consequently,

R600a is only allowed to be used in refrigerating appliances

with are designed for this refrigerant and fulll the above-

mentioned standard.

• R600a is heavier than air. The concentration will always

be highest at the oor level.

• The explosion limits are as follows:

o Lower Limit: 1.8% by volume

o Upper Limit: 8.4% by volume

o Ignition Temperature: 460°C

Prior To Installation

Carefully inspect cabinet for hidden damage. If damage is

discovered, le your claim immediately with the transport

company. Perlick is not responsible for damage in transit.

CAUTION

When moving the unit, be sure to

protect nished ooring with

appropriate material to avoid damage from moving the

unit.

CAUTION

Do not lift unit by drawer, shelving

or door handles, as damage to the

unit could occur if not moved as instructed.

WARNING

To prevent personal injury, a

minimum of two people are

required to lift the unit. Larger units may require

additional personnel.

Before moving the unit, secure the door shut with tape

to prevent door from swinging open while being moved.

Carefully move unit to installation site and place in front

of opening.

CAUTION

If unit has been laid on its back or

sides, place unit upright and allow

minimum of 24 hours before connecting power.

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

4| perlick.com/residential

WARNING

Never use an extension cord to

connect the unit to the electrical

source. Do not use a two-prong adapter or remove the

power cord ground prong. Failure to use grounding

mayresultindeath,seriousinjury,or property damage.

NOTICE

Using any voltage other than

specied will result in serious

damage to the unit.

Figure 1. HH (Sottile Model) Electrical Connections

USE & OPERATION

DANGER

Do not use or store ammable

liquids (ie; gasoline) or vapors

near the appliance to avoid re.

WARNING

To avoid contamination, use food

safe containers (not included) for

the storage of craft ice in the cabinet’s freezer

compartment.This equipment does not include a drain

and is intended for use with craft ice and other non-

hazardous food stored in food safe containers. Perlick

recommends the use of NSF food certified containers.

CAUTION

If service is necessary, repair work

should be performed by a Perlick-

authorized service personnel. Work done by

unqualied individuals could create dangerous

conditions in unit that may result in serious injury or

death.

NOTICE

The unit must NOT be totally

enclosed or damage may occur.

UNCRATING AND INSPECTION

Remove all crating material before operating. Carefully

inspect cabinet for hidden damage. If damage is

discovered, le your claim immediately with the transport

company. Perlick is not responsible for damage in transit.

DANGER

Do not use or store ammable

liquids (ie; gasoline) or vapors

near the appliance to avoid re.

INSTALLATION

NOTICE

The unit must NOT be totally

enclosed or damage may occur. Air

circulation must not be restricted. The condenser at

cabinet front must be provided with a minimum of two

inches air space. Be sure to provide access so front cover

can be removed to clean the condenser.

NOTICE

If unit has been laid on its back or

sides, place unit upright and allow

a minimum of 24 hours before connecting power.

Failure to follow this procedure may damage the

compressor and void the warranty.

NOTICE

Use care when handling, moving

and using the product to avoid

damaging the refrigerant tubing or increasing the risk

of a leak.

PLUMBING

No plumbing connections are required. Condensate from

the cooling coil is automatically evaporated through a

condensate pan located in the condensing section of the

unit.

ELECTRICAL

For specifications, see data plate located on the cabinet.

Also, see wiring diagram located in this publication.

WARNING

Inspect the electrical cord and

plug for damage prior to

energizing the unit to avoid potential electric shock.

WARNING

Use electical grounding to avoid

electrocution or electric shock.

This appliance is equipped with a 3-prong (grounding)

polarized plug for your protection against possible

shock hazards. Failure to use grounding may result in

death, serious injury, or property damage.

Preparing the Cabinet for Use

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

Perlick customer service (800)558-5592 | 5

13-⁄”

⁄”

⁄”

Figure 2A. 15” Anti-tip Kit

22-⁄”

⁄”

⁄”

Figure 2B. 24” Anti-tip Kit

REPAIR & MAINTENANCE

WARNING

All service work shall be performed

by Perlick-authorized service

personnel. All component parts shall be replaced with

like components. Incorrect parts or improper service

may result in re.

INSTALLING CASTERS OR LEGS OPTIONAL

Attach bracket assembly to the bottom of the cabinet base

using the ¼”-20 Philips head machine screws provided.

Attach casters or legs to the mounting bracket with ¼” –

20 Philips head screws provided

NOTICE

Anti-tip brackets are only used for

stationary cabinets and should not

be installed on cabinets with accessory casters. Caster

kits are available for HP, HC and HA model cabinets.

Refer to the instructions supplied with the caster kit

for proper installation.

NOTICE

If installing on a concrete oor,

concrete fasteners are required and

not included with the anti-tip kit.

NOTICE

Some installation sites may require

modications to provide a secure

surface for attaching the brackets.

A set of anti-tip brackets is supplied with the unit. These

brackets should be attached to the oor at the rear of the

unit. Each bracket must be located to engage the rear

glides when the cabinet is pushed back into position. Refer

to Figures 2A and 2B (shown on right) for anti-tip bracket

mounting locations.

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

6| perlick.com/residential

PREPARING THE SPACE

CAUTION

If the unit is to be installed under

a countertop, it is recommended

that the countertop be supported by surrounding

cabinetry and use shims to support countertop

directly above the refrigerated cabinet.

CAUTION

Make sure the oor under the

unit is level with the surrounding

nished oor. Protect a nished oor with plywood,

cardboard, or some other suitable material before

moving the unit into place. Failure to do this may result

in damage to the oor.

PLACING THE CABINET

To assure maximum performance, fresh air must

be allowed to circulate through the machinery

compartment. Do not place anything in front of the

cabinet that would obstruct air ow at these grilles. Do

not place the unit in an unventilated small room.

NOTICE

Cabinet should be leveled front to

back then side to side

1). Make sure the space opening is correctly sized for

the unit. See chart below for nished rough opening

requirements:

HP15 15” Signature Series

Height Depth Width

34-3/8”minimum,

35-1/2”maximum

24” 15”

HP24 24” Signature Series

Height Depth Width

34-3/8”minimum,

35-1/2”maximum

24” 24”

HH24 Signature Shallow Depth

Height Depth Width

32-1/2” 18” 24”

HC24 24” C-Series

Height Depth Width

34-3/8”minimum,

35-1/2”maximum

24” 24”

HA24 24” ADA-Compliant Series

Height Depth Width

32-1/2” 24” 24”

NOTE: For a cabinet door to open properly, the door must open a

minimum of 90°. Use a minimum 3” ller in corner installations to

assure a full 90° opening. Allow 25” clearance in front of unit for full

door swing and shelf/drawer pull out for all units.

2). Check that the following are level and square:

• Front and interior opening

• Installation opening and oor surface

• Countertop bottom front edge

NOTE: The oor under the unit must be at the same level as the

surrounding nished oor.

CAUTION

To prevent possible damage to

the countertop, do not place

heavy objects on countertop directly over unit.

INSTALLING THE UNIT

1) Plug the unit into the 15 amp grounded electrical

outlet located within the installation opening. With

power applied to the unit, check that the lighting and

cooling functions operate properly. Turn o the power

to the wall outlet at the circuit breaker.

2) With all surfaces in the installation opening square

and level, refer to Figure 4 on page 7 and perform the

following steps to level the unit:

• At the front of the opening, measure from the oor to

the bottom of the front edge of the countertop.

• Measure from the oor surface to the top of the unit

at the rear corners.

• Adjust the unit legs so these two measurements are

equal. Using an adjustable wrench or pliers, turn legs

clockwisetolowertheunitorcounterclockwisetoraiseit.

NOTE: Legs should not extend more than 3/4” from the bottom

of the unit.

3) Slide the unit into position in the opening. Make sure

the rear leveling legs slide under the ant-tip brackets.

Push the unit into the opening until the bottom front

edge of the unit is ush with the surrounding cabinetry,

or until the rear legs are tight against the anti-tip

brackets.

4) Shim the front of the unit so the front face is ush

with the surrounding cabinetry. Adjust the front legs to

support the countertop at the shimmed height. Using

an adjustable wrench or pliers, turn the legs clockwise to

lower the unit or counterclockwise to raise it. Countertop

should be resting on top of the unit.

NOTE: Countertop should be resting evenly on entire top of the

unit. Shim if necessary to prevent damage to the countertop.

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

Perlick customer service (800)558-5592 | 7

5) Check interior door openings to make sure the unit is

level and square. Install shelving and/or drawers. Place

the slide brackets squarely into the bracket grooves.

When installed properly, a “click” should be heard from

the slide bracket retaining tabs and the brackets should

slide smoothly. The retaining tabs will stop the shelf/

drawer when pulled out to full extension.

6) Turn on the power to the wall outlet at the circuit

breaker.

NOTE: Improper shelf/drawer installation may not actuate

slide mechanism.

TOE PLATE INSTALLATION

Once the unit is secured in place, install the louvered

toe plate. Secure the plate by snapping the latch into

the latch catch on the unit , and re-attach screws using

through holes provided in the toe kick. A phillips #2

screwdriver, with a 3” long shaft will be required. (Figure

5).

CAUTION

The toe plate must be removed to

service the unit. The oor cannot

interfere with removal, and the louvered sections

must not be covered or obstructed. Obstructions

could prevent proper air circulation, which may

damage the unit.

NOTE: To achieve maximum performance, interior louver

openings and fan guard openings should never be obstructed.

Figure 4. Leveling the Unit

Figure 5. Toe Kick Installation

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

8| perlick.com/residential

SHELVING/DRAWER ADJUSTMENTS

CAUTION

Completely empty shelf or drawer

before removing.

1. Pull the shelf/drawer out to its furthest position.

Locate the tabs in the middle of both extenders. Lift

one tab up while pushing the opposite tab down,

and pull shelf/drawer out (Figure 6).

2. Position each bracket separately. Grasp the middle

of the bracket, pull the front end up and out, then

forward to remove it.

3. Place bracket at desired location. Push the bracket

rear hook into the rear mounting slot, then set front

of the bracket in the front slot.

4. Repeat for other brackets.

5. Push extenders completely into brackets. Align the

shelf/drawer grooves with the extenders and slide

completely into the unit.

DOOR OPTIONS

Perlick residential units oer a variety of door panel

design alternatives; solid stainless steel, solid wood

overlay, glass with stainless steel trim and glass with

wood overlay trim.

Solid stainless steel and stainless steel glass doors are

shipped from the factory with decorative stainless steel

panels and handles in place on the unit. Solid wood

overlay and glass wood overlay doors are designed to

accept a decorative front panel to match surrounding

cabinetry and door handles.

NOTE: Wood overlay models are designed to accept wood

overlay panels from your cabinetry supplier. They do not

include a wood overlay. Templates are available on www.

perlick.com/residential-products. Click on Service & Support,

and then choose Wood Overlay Templates from the menu.

Take care in choosing the correct template for your specic

model. The handle is supplied by the customer.

All Perlick units (excluding beer dispenser and ice maker

models) accept any of the above door congurations

and are fully interchangeable. Glass door congurations

are not available on beer dispenser or ice maker models.

NOTE: Glass with stainless steel trim and glass with wood trim

may sweat in conditions with relative humidity over 75%.

CHANGING DOOR SWING DIRECTION

NOTE: Changing the door mount is not advisable if the door is

equipped with a custom wood overlay. Doing so may result in

an undesirable handle position.

To change the door swing direction, a hinge kit is

required:

• Part No. 67439R - Right hinge kit

• Part No. 67439L - Left hinge kit

In addition to the hinge kit, the following tools are

required:

• Large at head screwdriver

• Regular Phillips head screwdriver

• Plastic putty knife

1) Support the door in the open position as shown in

Fig. 7 on page 9. Remove the hinge pin.

2) Pull door to the side and then lower door.

3) Remove top and bottom hinge brackets. Retain screws

for later use. See Fig. 8 on page 9.

4) Remove the hole plugs from the top and bottom

hinge bracket mounting holes (see Fig. 8 on page 9).

Place the plugs in the holes on the opposite side made

vacant by removing the hinges in step 3.

Figure 5. Shelving/Drawer Adjustment

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

Perlick customer service (800)558-5592 | 9

5) Using the screws removed in step 3, install the top and

bottom hinge brackets from the kit (Fig. 9).

6) Remove the top and bottom door hinge brackets and

the push plunger brackets (Fig. 10). Retain the screws for

later use.

Figure 7. Door Removal

Figure 8. Hinge Removal

Figure 9. Hinge Installation

Figure 10. Door Brackets

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL

10 | perlick.com/residential

8) Remove the Perlick nameplate from the door front

using a plastic putty knife (Fig. 12). Install the new Perlick

nameplate included in the kit.

9) Insert the bearing into the door hinge bracket (Fig.

13).

10). Insert the V-block into the door bottom hinge

bracket and attach with the e-clip (Fig. 13). Note the

orientation of the V-block.

6°

11) Attach the top and bottom hinges and push plunger

using screws removed in step 6 (Fig. 14).

7) Remove the front panel from the door assembly

by removing the door gasket and then removing the

overlay mounting screws, 4 per side, from the perimeter

of the door assembly (Fig. 11). Rotate the front panel

180°. The top becomes the bottom. Reattach using the

same screws and mounting holes and then reinstall the

door gasket.

Figure 11. Removing Front Panel

Figure 12. Nameplate

Figure 13. Bearing and V-Block

Figure 14. Door Hinges

Andere Handbücher für HP15

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Perlick Unter der Theke Handbücher

Perlick

Perlick COMPLIANT Series Bedienungsanleitung

Beliebte Unter der Theke Handbücher anderer Marken

Subzero

Subzero AMPLIFIER Series Bedienungsanleitung

True

True TUC-119 Bedienungsanleitung

EVEREST REFRIGERATION

EVEREST REFRIGERATION ETR1 Bedienungsanleitung

Pkm

Pkm KS 82.3A+UB Bedienungsanleitung

Sub-Zero

Sub-Zero UC-24 series Bedienungsanleitung

Jackson

Jackson DISHSTAR ADA-SEER Benutzerhandbuch

Ice-O-Matic

Ice-O-Matic Gourmet UCG Series Handbuch

Gastros

Gastros InductWarm 130+ Produkthandbuch

Ice-O-Matic

Ice-O-Matic Gourmet UCG Series Handbuch

True

True TUR-24-A Bedienungsanleitung

CombiSteel

CombiSteel 7450.0079 Bedienungsanleitung

ARCHEAN

ARCHEAN DCIL-K200 Bedienungsanleitung

Ice-O-Matic

Ice-O-Matic UCG 45 Handbuch