Pfeiffer TPG 261 Bedienungsanleitung

BG 5195 BEN / A (2011-05)

A PASSION FOR PERFECTION

VACUUM

TPG 261

SingleGauge™, Single-Channel Measurement and Control Unit for

Compact Gauges

Operating Instructions

2BG 5195 BEN / A (2011-05) TPG261.oi

In all communications with Pfeiffer Vacuum, please

specify the information on the product nameplate. For

convenient reference copy that information into the

space provided below.

Typ:

No:

F-No:

V Hz VA

Pfeiffer Vacuum, D-35614 Asslar

This document applies to products with part number

PT G28 030.

The part number (No.) can be taken from the product

nameplate.

This manual is based on firmware version 302-510-D.

If your unit does not work as described in this document,

please check that it is equipped with the above firmware

version (→58).

We reserve the right to make technical changes without

prior notice.

All dimensions are indicated in mm.

Product Identification

Validity

BG 5195 BEN / A (2011-05) TPG261.oi 3

The TPG 261 is used together with Pfeiffer Vacuum

Compact Gauges (in this document referred to as

gauges) for total pressure measurement. All products

must be operated in accordance with their respective

Operating Instructions.

The scope of delivery consists of following parts:

1 TPG 261 Single-Channel Measurement and Control

Unit

1 Power cord

1 Connector for control connection

4 Collar screws and plastic sleeves

2 Rubber feet

1 Rubber bar

1 CD-ROM (Operating Instructions)

1 EC Declaration of Conformity

1 Installation Instructions

1 Safety Guide

SingleGauge™ INFICON AG

FullRange™ INFICON GmbH

Intended Use

Scope of Delivery

Trademarks

4BG 5195 BEN / A (2011-05) TPG261.oi

Contents

Product Identification 2

Validity 2

Intended Use 3

Scope of Delivery 3

Trademarks 3

1Safety 6

1.1 Symbols Used 6

1.2 Personnel Qualifications 7

1.3 General Safety Instructions 7

1.4 Liability and Warranty 8

2Technical Data 9

3Installation 14

3.1 Personnel 14

3.2 Installation, Setup 14

3.2.1 Rack Installation 14

3.2.2 Installation in a Control Panel 17

3.2.3 Use as Desk-Top Unit 18

3.3 Mains Power Connector 19

3.4 Gauge Connector sensor 20

3.5 control Connector 21

3.6 relay Connector 22

3.7 Interface Connector RS232 23

4Operation 24

4.1 Front Panel 24

4.2 Turning the TPG 261 On and Off 25

4.3 Operating Modes 26

4.4 Measurement Mode 27

4.5 Parameter Mode 31

4.5.1 Switching Function Parameters 33

4.5.2 Gauge Parameters 37

4.5.3 Gauge Control 47

4.5.4 General Parameters 52

4.5.5 Test Parameters 56

BG 5195 BEN / A (2011-05) TPG261.oi 5

5Communication (Serial Interface) 65

5.1 RS232C Interface 65

5.1.1 Data Transmission 65

5.1.2 Communication Protocol 67

5.2 Mnemonics 69

5.2.1 Measurement Mode 70

5.2.2 Parameter Mode 76

5.2.2.1 Switching Function Parameters 76

5.2.2.2 Gauge Parameters 77

5.2.2.3 Gauge Control 82

5.2.2.4 General Parameters 83

5.2.2.5 Test Parameters 84

5.2.3 Example 90

6Maintenance 91

7Troubleshooting 92

8Repair 93

9Storage 94

10 Disposal 94

Appendix 95

A: Conversion Tables 95

B: Default Settings 96

C: Firmware Update 97

D: Literature 100

E: Index 103

EC Declaration of Conformity 105

For cross-references within this document, the symbol

(→XY) is used, for cross-references to further docu-

ments, listed under "Literature", the symbol (→[Z]).

6BG 5195 BEN / A (2011-05) TPG261.oi

1 Safety

DANGER

Information on preventing any kind of physical injury.

WARNING

Information on preventing extensive equipment and

environmental damage.

Caution

Information on correct handling or use. Disregard can

lead to malfunctions or minor equipment damage.

The lamp/display is lit.

The lamp/display flashes.

The lamp/display is dark.

Press the key (example: PARA key).

Do not press any key.

1.1 Symbols Used

Symbols for residual

risks

Further symbols

BG 5195 BEN / A (2011-05) TPG261.oi 7

Skilled personnel

All work described in this document may only be

carried out by persons who have suitable technical

training and the necessary experience or who have

been instructed by the end-user of the product.

Adhere to the applicable regulations and take the nec-

essary precautions for all work you are going to do and

consider the safety instructions in this document.

DANGER

DANGER: mains voltage

Contact with live parts is extremely

hazardous when any objects are introduced

or any liquids penetrate into the unit.

Make sure no objects enter through the

louvers and no liquids penetrate into the

equipment.

Communicate the safety instructions to all other users.

1.2 Personnel

Qualifications

1.3 General Safety

Instructions

8BG 5195 BEN / A (2011-05) TPG261.oi

Pfeiffer Vacuum assumes no liability and the warranty

becomes null and void if the end-user or third parties

•disregard the information in this document

•use the product in a non-conforming manner

•make any kind of interventions (modifications, altera-

tions etc.) on the product

•use the product with accessories not listed in the cor-

responding product documentation.

1.4 Liability and

Warranty

BG 5195 BEN / A (2011-05) TPG261.oi 9

2 Technical Data

Voltage 90 … 250 VAC

Frequency 50 … 60 Hz

Power consumption ≤45 W

Overvoltage category II

Protection class 1

Connection European appliance connec-

tor IEC 320 C14 (→19)

Temperature

storage

operation

–20 … +65 °C

+ 5 … +50 °C

Relative humidity ≤80% up to +31 °C,

decreasing to 50% at +40 °C

Use indoors only

max. altitude 2000 m NN

Pollution degree II

Protection type IP30

Number 1

Compatible

Compact Gauges

Pirani

Pirani Capacitance

Cold Cathode

FullRange™ CC

Process Ion

FullRange™ BA

Capacitance

Piezo

TPR 261, TPR 265, TPR 280,

TPR281

PCR 260, PCR 280

IKR 251, IKR 261, IKR 270

PKR 251, PKR 261

IMR 265

PBR 260

CMR 261 … CMR 375

APR 250 … APR 267

Number 1

sensor connector Amphenol C91B appliance

connector, female, 6-pin

(pin assignment →20)

Mains specifications

Ambiance

Compatible gauges

Gauge connections

10 BG 5195 BEN / A (2011-05) TPG261.oi

Voltage +24 VDC ±5%

Current 750 mA

Power 18 W

Fuse protection 900 mA with PTC element,

self-resetting after turning the

TPG 261 off or disconnecting

the gauge. The supply con-

forms to the requirements of a

grounded protective extra low

voltage (SELV).

Front panel

Remote control

via 3 keys

via RS232C interface

Measurement range depending on gauge

(→[1] … [17])

Measurement error

gain error

offset error

≤0.01% F.S.

Measurement rate 50 / s

Display rate 10 / s

Filter time constant

slow

normal (nor)

fast

1.2 s (fg= 0.13 Hz)

400 ms (fg= 0.4 Hz)

20 ms (fg= 8 Hz)

Measurement units mbar, Pa, Torr

Offset correction for linear gauges

–5 … 110% F.S.

Calibration factor for logarithmic gauges

0.10 … 9.99

for linear gauges

0.500 … 2.000

A/D converter resolution 0.001% F.S.

Gauge supply

Operation

Measurement values

Inhaltsverzeichnis

Andere Pfeiffer Steuereinheit Handbücher

Pfeiffer

Pfeiffer TC 110 Bedienungsanleitung

Pfeiffer

Pfeiffer Series 6a Einrichtungshandbuch

Pfeiffer

Pfeiffer 14t Series Leitfaden

Pfeiffer

Pfeiffer 14c Series Leitfaden

Pfeiffer

Pfeiffer Samson BR1a Bedienungsanleitung

Pfeiffer

Pfeiffer 26a Series Leitfaden

Pfeiffer

Pfeiffer 28z Series Bedienungsanleitung

Pfeiffer

Pfeiffer 20b Series Leitfaden

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung