Phase Technologies CI-10 VIII Bedienungsanleitung

TECHNOLOGY

Custom Installation Series - Round and Rectangular Speakers

IN-WALL & IN-CEILING SYSTEMS WITH HIGH-END TONAL BALANCE

All CI series speakers are covered by a limited lifetime warranty. Amplifiers are covered for three years.

Your System, Your Way

With today’s active lifestyles, your home serves many

purposes. This often means limited choices for placing

cabinet speakers. An efficient, practical and common

solution is ceiling or wall installation.

Phase Technology began producing their top quality

line of Custom Installation speakers in 1985. With

their ever-present insistence on both accuracy and

build excellence, Phase Tech’s line of flush-mount

speakers offers the best in musical and theatrical

performance. A wide variety of both round and

rectangular models are available to meet any budget or

performance expectation, and all fit into universal

mounts to give flexibility in meeting your personal

needs. With 22 years of experience and eight model

generations, Phase Technology has a perfect solution

for you and your home.

Technology in the Service of Your

Entertainment

You have a wide range of movie preferences and

musical styles. Choose a line of speakers designed to

be extremely accurate and lifelike, no matter what the

style. Phase Technology began designing and building

speakers in 1955 and is known for providing superb

speakers in all price ranges. Receive the best possible

value for your investment with Phase Technology’s

Custom Installation Series. What your eyes don’t

notice, your ears certainly will.

Tweeter

Woofer/Midrange

Sensitivity

Impedence

Finish

Mounting Depth

Recommended

Amp Power

Cutout Dim.

Outside Dim.

Weight

.75” variable-axis dome

6.5” mineral-polypropylene

42 Hz - 20 kHz

90 dB

8 Ohms nominal

White (paintable)

4”

10 - 150 Watts RMS

8.375” diameter

9.625” diameter

4 lbs

1” variable axis soft-dome

40 Hz - 22 kHz

90 dB

8 Ohms nominal

White (paintable)

4”

10 - 150 Watts RMS

8.375” diameter

9.625” diameter

6 lbs

Dual .75” dome, mono/stereo/bipolar/dipolar switchable

6.5”woven glass fiber

45 Hz - 20 kHz

91 dB

8 Ohms nominal

White (paintable)

4”

10 - 100 Watts RMS

8.375” diameter

9.625” diameter

6 lbs

CI-6.0 VIII QM CI-6.1 VIII QM CI-6.2s VIII QM

Tweeter

Woofer/Midrange

Sensitivity

Impedence

Finish

Mounting Depth

Recommended

Amp Power

Cutout Dim.

Outside Dim.

Weight

1” variable-axis soft-dome

7” woven glass fiber, 1.5” soft-dome midrange

38 Hz - 22 kHz

92 dB

8 Ohms nominal

White (paintable)

4”

15 - 200 Watts RMS

8.375” diameter

9.625” diameter

7 lbs

1” variable-axis soft-dome

7” woven glass fiber

38 Hz - 22 kHz

91 dB

8 Ohms nominal

White (paintable)

4”

15 - 200 Watts RMS

8.375” diameter

9.625” diameter

6 lbs

CI-7.2 VIII QM CI-7.3 VIII QM

6.5” woven glass fiber

Frequency + 3dB

TECHNOLOGY

Custom Installation Series - Round Speakers

IN-WALL & IN-CEILING SYSTEMS WITH HIGH-END TONAL BALANCE

All CI series speakers are covered by a limited lifetime warranty. Amplifiers are covered for three years.

Tweeter

Woofer

Sensitivity

Impedence

Finish

Mounting Depth

Recommended

Amp Power

Cutout Dim.

Outside Dim.

Weight

.75” variable-axis dome

50 Hz - 20 kHz

90 dB

8 Ohms nominal

White (paintable)

3.25”

10 - 150 Watts RMS

10.75” H x 7.5” W

11.81” H x 8.625” W

4 lbs

1” variable-axis soft-dome

6.5” injection molded poly-cone

48 Hz - 20 kHz

91 dB

8 Ohms nominal

White (paintable)

3.25”

15 - 150 Watts RMS

10.75” H x 7.5” W

11.81” H x 8.625” W

5 lbs

6.5” high power woven glass fiber

43 Hz - 20 kHz

90 dB

8 Ohms nominal

White (paintable)

3.375”

15 - 200 Watts RMS

10.75” H x 7.5” W

11.81” H x 8.625” W

5 lbs

Tweeter

Woofer

Sensitivity

Impedence

Finish

Mounting Depth

Recommended

Amp Power

Cutout Dim.

Outside Dim.

Weight

1” variable-axis soft-dome

7” woven glass fiber, 1.5”

soft-dome midrange

35 Hz - 22 kHz

92 dB

8 Ohms nominal

White (paintable)

3.5”

15 - 200 Watts RMS

10.75” H x 7.35” W

11.81” H x 8.625” W

7 lbs

1” variable-axis soft-dome

7” woven glass fiber

35 Hz - 20 kHz

91 dB

8 Ohms nominal

White (paintable)

3.5”

10 - 200 Watts RMS

10.75” H x 7.5” W

11.81” H x 8.625” W

6 lbs

CI-10 VIII CI-20 VIII CI-40 VIII CI-60 VIII

CI-70 VIII

CI-72 VIII CI-110 II

CI-Surround

1” variable-axis soft-dome 1” variable-axis soft-dome

6.5” RPF flat-piston

40 Hz - 22 kHz

89 dB

8 Ohms nominal

White (paintable)

3.5”

15 - 200 Watts RMS

10.75” H x 7.5” W

11.81” H x 8.625” W

6 lbs

1” variable-axis soft-dome with

Unicell anti-diffraction treatment

32 Hz - 22 kHz

91 dB

8 Ohms nominal

White (paintable)

3.75”

20 - 250 Watts RMS

20.5” H x 8.75” W

21.5” H x 10” W

19 lbs

(2) 6.5” RPF flat-piston

6.5” poly-cone

Dual .75” dome, mono/stereo/bipolar/

dipolar switchable

6.5“ woven glass fiber

45 Hz - 20 kHz

90 dB

8 Ohms nominal

White (paintable)

3.5”

10 - 150 Watts

10.75“ H x 7.5” W

11.81” H x 8.625” W

5.5 lbs

Frequency + 3dB

TECHNOLOGY

Custom Installation Series - Rectangular Speakers

IN-WALL & IN-CEILING SYSTEMS WITH HIGH-END TONAL BALANCE

All CI series speakers are covered by a limited lifetime warranty. Amplifiers are covered for three years.

TECHNOLOGY

Custom Installation Series - Universal Mounting Options

IN-WALL & IN-CEILING SYSTEMS WITH HIGH-END TONAL BALANCE

All CI series speakers arecovered by a limited lifetime warranty. Amplifiers are covered for three years.

Woofer

Frequency

Mounting

Recommended

Room Size

Weight

Enclosure Dim.

Cutout Dim.

IW-100

7” mica/graphite poly cone

30-160 Hz (+ 3dB)

42” H x 14 3/8” W x 3 3/8” D

11 5/8” H x 8 1/2” W

Enclosure mounts between 16”

on-center 2x4 studded wall,

3.5” D

36 lbs (in enclosure)

Up to 1800 cubic feet

Dual 8” mica/graphite poly

cone

25-160 Hz (+ 3dB)

72” H x 14 3/8” W x 3 3/8” D

20 1/2” H x 8 3/4” W

Enclosure mounts between 16”

on-center 2x4 studded wall,

3.5” D

51 lbs (in enclosure)

1800-3300 cubic feet

In-Wall Subwoofers

P-200 Amp

Mounting Options

CI-FGR QM

All CI in-ceiling speakers are now manufactured with the new CI-FGR QM

Quick Mount system, making installation the easiest you’ve

ever done. No longer will you have to suffer through holding speakers in

place overhead while tightening their screws. Newly developed

clamps engage to hold the speaker in the flange. Simply twist the speaker

counter-clockwise into the flange. The clamps engage with the

tabs on the flange. The speaker is then held secure while you safely tighten

the screws.

All previously-produced CIs and flanges are compatible with the newer

models. New CIs fit older flanges by removing the new clamps

from the speakers before installation and then using the screws included

in the box. Or vice-versa, older CIs fit the new flanges by adding

readily-available clamps to the speakers.

• 200 watts continuous/300 watts peak

• Three modes: Sub, LFE, and Full-Range

• User-adjustable gain control matches the sub

to any system’s efficiency

• Internal crossover range from 40-160 Hz

0º /180º phase switch

• Variable low frequency boost from -3dB to

+6dB allows for tuning to any room’s acoustics

• Dimensions: 17.75”W x 1.875”H x 11.75”D

• Weight: 18 lbs

Specialty Installation Products for

Even Higher Performance

Sometimes we look for higher output or more extended bass response,

even though we need to use inconspicuous flush-mount speakers. Phase

Technology makes in-wall subwoofers with integral enclosures and compan-

ion amplifier/crossover components to meet your need for more dramatic

sound. The 7” IW-100 is suitable for smaller rooms, while the dual 8”

IW-200 produces serious bass response in larger spaces. Each 200 watt

P-200 amplifier can drive an additional sub enclosure for even more low

frequency output.

For those listeners with more sophisticated needs, we proudly offer our

CI-110 in-walls. These highly-reviewed speakers feature twin 6.5” RPF

woofers along with 1” soft-dome tweeters. They add our exclusive Unicell

acoustic foam to eliminate tweeter diffraction and utilize our patented

Positive Clamping system to assure a tight seal with all walls for the best

possible sound quality. They share all speaker and crossover technology

with our acclaimed Premier Collection speakers. You can’t do any better

than the CI-110 II if you’re serious about sound but need to keep speakers

discreetly hidden in the walls.

IW-200

CI-FGR T

CI-FGR QM

Quick Mount clamp prior to engagement

with the flange

CI-FG QM

CI-FGR T

This 15˚ tilt-mount is compatible with

five in-ceiling models, allowing the

speaker’s sound to be directed at the

listener or to compensate for an angled

ceiling.

CI-FG QM

Any of the seven in-wall CI models fit

our CI-FG QM, featuring a patented

tool-free clamping system for an easy

and clean installation or for changing

speakers.

Speaker is rotated counterclockwise

to engage Quick Mount clamp with

flange

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Phase Technologies Sprecher Handbücher

Phase Technologies

Phase Technologies CI6.0 IX QM Bedienungsanleitung

Phase Technologies

Phase Technologies Spacia CI-MM7F Bedienungsanleitung

Phase Technologies

Phase Technologies PC60 CA Originalbetriebsanleitung

Phase Technologies

Phase Technologies CI520 Programmierhandbuch

Phase Technologies

Phase Technologies Custom Installation Series Bedienungsanleitung

Phase Technologies

Phase Technologies SOLARIS OUTDOOR SERIES SPF-25 Bedienungsanleitung

Phase Technologies

Phase Technologies CI-6.0 VIII Konfigurationshandbuch

Phase Technologies

Phase Technologies CI-6.0 VIII QM Konfigurationshandbuch

Phase Technologies

Phase Technologies Speaker Bedienungsanleitung

Phase Technologies

Phase Technologies SPF-15 Konfigurationshandbuch

Phase Technologies

Phase Technologies PC-1.1 II Bedienungsanleitung

Phase Technologies

Phase Technologies Solaris SPF-35 Bedienungsanleitung

Phase Technologies

Phase Technologies CI-MM7W Bedienungsanleitung

Phase Technologies

Phase Technologies CS-6R/MICRO Bedienungsanleitung

Phase Technologies

Phase Technologies CI-6.0 Bedienungsanleitung

Phase Technologies

Phase Technologies Solaris ATS-1 Originalbetriebsanleitung

Phase Technologies

Phase Technologies ATS-1 Bedienungsanleitung

Phase Technologies

Phase Technologies CI-SURR Bedienungsanleitung

Phase Technologies

Phase Technologies dARTS DCB-1.0-LR Bedienungsanleitung

Phase Technologies

Phase Technologies SPF-15 SOLARIS OUTDOOR SERIES Technisches Dokument

Phase Technologies

Phase Technologies CI-6.0 IX QM Konfigurationshandbuch

Phase Technologies

Phase Technologies PC-6.1 Bedienungsanleitung

Phase Technologies

Phase Technologies CI-6.0 VIII QM Konfigurationshandbuch

Phase Technologies

Phase Technologies CI1.5 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung