Phase DP4000 Benutzerhandbuch

Phase Technology Corporation www.phasetech.com

MSE Audio 10661 Rene St. Lenexa, Kansas 66215 (855) 663-5600 www.mseaudio.com

Power FL-8 Power FL-10 Power FL-12

DP4000

System Installation Guide

Thank you for purchasing Phase Technology’s

revolutionary dARTS (Digital Audio Reference The-

ater System). This exciting entertainment system

will provide the best possible sound reproduction

of music and video programming in any room envi-

ronment, and at every seat in that room.

Please take a few moments to study this Instal-

lation Guide to get the most out of your dARTS

system. Your professional installer will make every

effort to place the speakers to take into account

your room’s natural acoustics, but will also accom-

modate your needs in making them t into your

decorating plans. Phase Technology’s perfectly

matched speakers, and the Audyssey Laboratories

MultEQ XT 32 room correction software as imple-

mented by your installer, will then work together

to overcome the acoustic anomalies of your room

and give you ideal sound at every seating location.

Contents:

Safety Instructions 2

Audyssey MultEQ XT32 Installation 3

DP4000 Features 3

Speaker Placement 3

System Wiring and Connection 4

Caring for Your DP4000 7

Maintenance and Service 7

Warranty 7

DP4000 Features:

Audyssey MultEQ XT32 callibration software

Molded aluminum enclosure

Large dual mode power supply

Eight (8) XLR balanced Inputs

Sixteen (16) congurable input/output channels

Controls up to four (4) rooms of stereo

Auto switch

1. Read Instructions - All the safety and operating

instructions should be read before the appliance is

operated.

2. Retain Instructions - The safety and operating

instructions should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions - All operating and other instructions

should be followed.

5. Water and Moisture - The appliance should not be

used near water - for example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, or near a

swimming pool, etc.

6. Carts and Stands - The appliance should be used

only with a cart or stand that is recommended by the

manufacturer.

PORTABLE CART WARNING

7. Wall or Ceiling Mounting - The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

8. Ventilation - The appliance should be situated so that

its location or position does not interfere with its proper

SAFETY INSTRUCTIONS

ventilation. For example, the appliance should not be

situated on a bed, sofa, rug, or similar surface that may

block the ventilation openings; or placed in a built-in

installation, such as a bookcase or cabinet that may

impede the ow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat

sources such as radiators, stoves, or other appliances that

produce heat.

10. Power Source - The appliance should be connected to

a power supply only of the type described in the operating

instructions or as marked on the appliance.

11. Power Cord Protection - Power supply cords should

be routed so that they are not likely to be walked on or

pinched by items placed up or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

12. Cleaning - The appliance should be cleaned only as

recommended by the manufacturer.

13. Nonuse Periods - The power cord of the appliance

should be unplugged from the outlet when left unused for

a long period of time.

14. Object and Liquid Entry - Care should be taken so that

neither objects fall nor liquids spill into the inside of the

appliance.

15. Damage Requiring Service - The application should be

serviced by qualied service personnel when:

a. the power supply cord or the plug has been damaged,

b. objects have fallen onto or liquid has been spilled into

the appliance,

c. the appliance has been exposed to rain,

d. the appliance does not appear to operate normally or

exhibits a marked change in performance, or

e. the appliance has been dropped or the cabinet

damaged.

16. Servicing - The user should not attempt to service the

appliance beyond those means described in the operating

instructions. All other servicing should be referred to

qualied service personnel.

17. Grounding or Polarization - Precautions should be

taken so that the grounding or polarization means of an

appliance is not defeated.

Explanation of Graphical Symbols

The lightning ash with arrowhead symbol, within

an equilateral triangle, is intended to alert you to the

presence of un-insulated “dangerous voltage: within the

product’s enclosure that may be off sufcient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION: To reduce the risk of electric shock, do not remove cover (or

back). No user-serviceable parts inside. Refer servicing to qualied service

personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

APPLICABLE FOR USA, CANADA OR WHERE

APPROVED FOR USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRESE

ET POUSSER JUSQU AU FOND.

Audyssey MultEQ XT32 Software Installation

Referring to Audyssey’s calibration guide, your installer will use a professional calibration microphone

and a digital audio interface with his laptop computer to analyze your room’s acoustic properties as they

affect the entire seating area. This will give him the information to properly set up the volume levels and

delays for each speaker, and then it will automatically generate a series of correction lters to load into

your Phase Technology DP4000 amplier/speaker controller. This correction process will then return your

speakers to their original perfectly matched levels, and remove the room’s harmful acoustic contribu-

tions, leaving you with superb sonic performance that sounds the same at every seat in the room.

Speaker Placement

Phase Technology’s ability to precisely match each speaker to one another yields a much more envelop-

ing and accurate soundeld. This immersive entertainment experience will be enhanced if you will follow

a few basic rules of speaker placement. The front speakers (left, center, right) should all be placed in as

close to a horizontal line as possible, and should be at or slightly above ear level while seated. The left

and right speakers should be far enough apart (6- 8 feet if seated no more then 12 feet from your video

display) to separate the information from each channel, but not so far as to create a discontinuity with

the image on the video display. With a large projection screen, they should be placed as close to the

sides of the screen as is practical. In addition to being in line with the front channels, the center speaker

should be as close to the center of the display as possible, whether above/below the display, or behind a

perforated projection screen. Phase Technology speakers are magnetically shielded so they will not inter-

fere with any type of television set. Please place the included rubber feet on the bottom corners of each

speaker to keep it from vibrating against the shelf or stand on which it sits.

Each of the dARTS speakers (except for subwoofers) includes Phase Technology’s acclaimed variable-

axis soft dome tweeters. This allows your installer to direct high frequencies toward your listening loca-

tion for even greater latitude in speaker placement, and more precise imaging and localization of sound.

Please adjust these tweeters by carefully pressing on the outer rim of the housing only, avoiding contact

with the actual soft dome speaker element. These adjustments, if needed, should be done prior to your

installer calibrating the system to your room, so the correction process will read the tweeters’ energy ac-

curately at each listening position.

The surround speakers should be placed well above ear level in most rooms. Whether you are using di-

rect- radiating speakers or our switchable dipolar/bipolar speakers for the surround channels, please pay

attention to placing them to create a large and enveloping soundeld. In a 5.1-channel conguration, you

will use one pair of surround speakers. If your listening area is near the back wall, the best results can of-

ten be obtained by placing the surround speakers on the side walls, centered on your listening positions.

With speakers directly to the sides, switching the surround speakers into “Dipole” mode (with their front-

panel toggle switch) will a very diffuse, non-directional soundeld. If you prefer to have more localization

of the surround effects, select the “Bipole” mode or use direct-radiating speakers to match the front

channels. If your seating is away from the back wall, you can choose to mount your surround channels

either beside or behind the listening position. Experiment with both “Dipole” and “Bipole” surround set-

tings with your installer to see which sounds best to you, so he can calibrate the room to your taste.

In a 6.1-channel setup, a pair of surround speakers will be placed to the sides of your listening area, with

an additional rear center channel speaker behind you. If you choose to implement 7.1-channel surround

you will use a pair of surrounds to the sides, and another pair behind you, spaced evenly to ll the room.

Again, please experiment with your installer to determine which modes sound best for each pair before

he calibrates your room to determine the correction curves for each channel. If you change your mind

later, you will need to have the room recalibrated to accommodate the new speaker settings. Also, if you

change your room’s furnishings in any signicant way (oor coverings, drapes, furniture) please have your

installer recalibrate the room to return your system to its original target response curves.

Your dARTS powered subwoofer(s) are specically designed to blend well with the dARTS main speak-

ers, and to perform well with either music or movies, augmenting the deep bass which is such an inte-

gral part of our emotional involvement with our entertainment choices. Although very deep bass is es-

sentially non-directional, the higher bass frequencies and the initial attacks of each note are often shared

by the main speakers. Thus, subwoofers usually blend best when they are relatively close to the front

channels. The dARTS Custom Built-In line offers subs which are the same width as the main speakers,

so they can be readily used as speaker stands, ensuring proper integration and impact. If you do use the

system in this way, please have your installer mount the included connecting brackets to lock the subs

and main speakers together, with their fronts vertically aligned. The brackets allow for vertical adjustment

of the main speakers to accommo-date the use of isolation feet. The Audyssey Laboratories MultEQ XT

32 room calibration software WILL account for sub placement (as it does for all speakers) while measur-

ing your room and designing the correction curves, but the closer you can come to ideal placement, the

better will be the results.

System Wiring and Connection

Phase Technology’s dARTS systems are unique in that all speakers are either bi-amplied or tri-amplied.

This means that each tweeter, midrange, and woofer set is connected to their own individual amplier

channel to allow for greater dynamic performance and exibility in conguration. To take advantage of

these connections, front main and surround channels need to be wired with four-conductor speaker

wire. The horizontal center channel is tri-amplied, so it needs to have six conductors available. Phase

Technology recommends using 14 AWG speaker wire (no smaller than 16 gauge) for each of these con-

nections. Wire with higher gauge numbers is thinner, and is not recommended.

The dARTS subwoofer includes its own 500-watt on-board power amplier. It will need to have a shield-

ed audio interconnect run to its “LINE INPUT L” jack from the DP4000 amplier/controller’s “SUB OUT 8”

jack. The subwoofer’s amplier features both line-level inputs and outputs To add additional subwoofers

to increase the bass performance in a large room, have your installer run an additional shielded audio

interconnect from the rst sub’s “LINE OUTPUT L” jack to the second sub’s input “LINE INPUT L” jack,

continuing on to as many subs as desired. The sub amp’s volume control should be set at the“12:00”

position for the calibration process, but can then be raised or lowered a bit to match your own desired

bass levels in the room.

The heart of the dARTS system is the DP4000 digital amplier/controller. It consists of a 16-channel

power amplier (up to 250 w/ch), the setup rmware used by Phase Technology to individually match

your speakers to each other (frequency response, crossover, time alignment), and space for the room

correction program your installer will run to calibrate the system to your room. Each of your speakers will

connect to the DP4000 with either two or three pairs of speaker wire. Your surround processor or receiv-

er’s preamp outputs will also be connected to the DP4000. If desired, your installer can connect

a 12 V DC trigger to the amplier’s “POWER CONTROL IN” jack from your surround processor or your

automated control system to turn the amplier on and off. There is also a “POWER CONTROL OUT”

jack available to pass on the control voltage to another component in your theater system. The following

tables show how each channel’s wiring is connected to the amplier/controller’s input and output termi-

nals:

Connections From DP4000 to Surround Preamp/Receiver

DP Input

Number

XLR Balanced

Input Number Preamp Output Channels

1 1 Left Front

2 2 Right Front

5 3 Center Channel

6 4 Subwoofer

9 5 Left Surround

10 6 Right Surround

13 7 Left Rear Surround in 7.1 System;

Rear Center in 6.1 System

14 8 Right Rear Surround in 7.1 System

Connections From DP4000 to System’s Speakers

DP4000 Output

Numbers (Channels 1-8) Speaker Connections

1Input 1: Left Front Woofer;

XLR Input 1: Left Front Speaker

2Input 2: Left Front Tweeter;

XLR Input 1: Left Front Speaker

3Input 3: Right Front Woofer;

XLR Input 2: Right Front Speaker

4Input 4: Right Front Tweeter

XLR Input 2: Right Front Speaker

Input 5: Center Channel Woofer;

XLR Input 5: Center Channel Speaker

Note: Not connected if using a 2-way center

channel speaker

6Input 6: Center Channel Woofer/Midrange;

XLR Input 5: Center Channel Speaker

7Input 7: Center Channel Tweeter;

XLR Input 5: Center Channel Speaker

8 (RCA “Sub Out 8” Jack) Input 8: To Subwoofer;

XLR Input 6: Subwoofer

DP4000 Output

Numbers (Channels 9-16) Speaker Connections

9Input 9: Left Surround Woofer;

XLR Input 9: Left Surround Speaker

10 Input 10: Left Surround Tweeter;

XLR Input 9: Left Surround Speaker

11 Input 11: Right Surround Woofer;

XLR Input 10: Right Surround Speaker

12 Input 12: Right Surround Tweeter

XLR Input 10: Right Surround Speaker

Input 13: Left Rear Woofer in 7.1 System

(or Rear Center Woofer in 6.1 System);

XLR Input 13: Left Rear Speaker

Input 14: Left Rear Tweeter;

(or Rear Center Woofer in 6.1 System);

XLR Input 13: Left Rear Speaker

15 Input 15: Right Rear Woofer;

XLR Input 14: Right Rear Speaker

16 Input 16: To Right Rear Tweeter;

XLR Input 14: Right Rear Speaker

PLEASE NOTE: Although these connecting connections directions are not “normal,” based on conven-

tional surround systems, they ARE correct for the dARTS system, and must be followed exactly for the

system to operate properly and safely. Please do not plug the amplier into AC power or turn it on until ALL

system connections have been securely made.

Speaker outputs 1-16

12 v input trigger

12 v output trigger

Input channels 1-16

Subwoofer line level output

AC Input

XLR Balanced Level Inputs

Caring for Your DP4000

The DP4000 is molded in an aluminum enclosure and nished with a high degree of craftsmanship. We

recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of

the nish. Avoid products containing silicones, oils, oil derivatives, or solvents. Aluminum enclosures may

be cleaned with a damp cloth as necessary.

Maintenance and Service

Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your DP4000

will ever need service if connected and used as outlined in this Owners’ Manual. In the unlikely event that

a problem does occur, please contact your Phase Technology dealer. Your dealer has the necessary

factory-authorized parts and trained technicians to quickly restore your speaker to its original performance

specications.

Warranty

Limited Warranty

Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a

period of ten (10) years for speaker product and three (3) years for the electronic components to the original

purchaser. Purchase must be made from an authorized Phase Technology dealer.

This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in

transit, alterations, unauthorized repairs, failure to follow instructions, re, ood or any other cause beyond

the reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be brought to the

attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number

has been altered or removed.

To obtain warranty service, the defective product must be shipped in its original carton or equivalent

together with original invoice or bill of sale, insured and prepaid to your authorized Phase Technology dealer

or the factory when warranty service is requested.

If you choose to return the defective product to the factory you must rst call us at (888) phase-tk to obtain

a Return Authorization number prior to shipping. Product repaired under this warranty will be returned to

you freight collect.

Andere Handbücher für DP4000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Phase Heimkinosystem Handbücher

Phase

Phase DP4000 Bedienungsanleitung

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Sony

Sony BDV-N990W Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung