Philco PHSI 2213 Handbuch

Instruction manual

Návod k obsluze

Návod na obsluhu

Instrukcja obsługi

Használati útmutató

PHSI 2213

Dear customer,

Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all the

instructions in this user's manual.

CONTENTS

PART 1: IMPORTANT SAFETY INSTRUCTIONS...................................................................................................................2

PART 2: KNOW YOUR IRON.....................................................................................................................................................3

PART 3: BEFORE FIRST USE ...................................................................................................................................................4

PART 4: HOW TO CLEAN AND STORE .................................................................................................................................7

PART 1: IMPORTANT SAFETY INSTRUCTIONS

• This appliance may be used by children 8 years of age and

older and by persons with physical or mental impairments

or by inexperienced persons if they are properly

supervised or have been informed about how to use of the

product in asafe manner and understand the potential

dangers. Cleaning and maintenance performed by the

user must not be performed by children unless they are

older than 8 years of age and under supervision. Keep

this appliance and the power cord out of reach of children

younger than 8years of age.

• Children must not play with the appliance.

IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions should always be followed:

1. Make sure the power used corresponds with the one indicated on the rating label.

2. Use the iron only for needed use as descried in the instruction manual.

3. Close supervision is necessary when any appliance is used near children. Do not leave iron unattended

while connected or on an ironing board. Burns can occur from touching hot metal parts, hot water or steam.

4. Keep the iron out of reach of children.

5. The iron should never be left unattended while it is connected to the mains supply.

6. Unplug the iron from the mains electrical supply before:

7. Cleaning

8. Filling with water or emptying the water tank

9. Immediately after use

10. Never operate the iron with damaged power cord or plug, or after it has fallen or been damaged in any

way. To avoid the risk of electric shock, do not disassemble the iron, take it to a qualiﬁed serviceman for

examination and repair.

11. Do not let cord touch hot surfaces.

12. To protect against a risk of electric hazards, do not immerse the iron in water or any other liquid.

13. The iron must be used and rested on a stable surface.

14. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

15. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

PART 2: KNOW YOUR IRON

11. 1. 2. 3. 4. 5. 6.

10.

1. Waterﬁlling inlet

2. Steam control turning knob

3. Burst of steam button

4. Spray Button

5. Temperature contron buttons

6. LED display lights

7. Power cord protector

8. Water tank

9. Soleplate

10. Self-cleaning button

11. Spray Nozzle

PART 3: BEFORE FIRST USE

It is normal for small amount of smoke to be produced the ﬁrst time, this will quickly disappear.

When using the steam function for the ﬁrst time, do not direct the steam towards the laundry, as there could

be debris from the steam vents.

FILLING WITH WATER

We recommend the use of distilled water.

Make sure that both the Steam Control turning Knob is in “off”

Hold the iron upright so that the water-ﬁlling inlet is in a horizontal position.

Fill with water through Water Filling Inlet until the water reach the “MAX” mark indicated on the side of the iron,

and never ﬁll above this mark.

LED DISPLAY PANEL

Displays the fabric setting and the temperatures indicators

SETTING TEMPERATURE

Follow the ironing instructions on the garment label. If there is no instruction but you do know the kind of fabric,

please consult the following table.

NOTE:

If the fabric consists of various kinds of fabrics, always select the temperature required by the most delicate

fabrics.

Fabric Temperature control Temperature requirement

Synthetic Low temperature

Silk, wool  Medium temperature

Cotton, linen  MAX High temperature

Ironing without steam

If you intend to dry-iron fabrics there is no need to ﬁll the water tank ,However,if water is already in the water

tank, you don’t need to empty it

1. Set the steam control to the off position

2. Plug your iron in to the mains supply socket and switch the socket on ,The STANDBY and and lights will

illuminate.

3. Press the +/- buttons to select the temperature setting appropriate to the fabric type being ironed. For

example, if you select the  setting .The STANDBY and  lights will illuminate and the  light

will ﬂash as your iron heats up .when the  light stops ﬂashing .your iron is at the correct temperature

and ready to use .

4. During use, the  light will ﬂash periodically as your iron maintains the selected temperature

Steam ironing

If you do not allow your iron to reach the selected temperature, water may drip from the soleplate during steam

ironing .

It is recommended that for harder to iron fabrics such as cotton and linen, steam should be used when ironing.

When ironing cotton and linen ,always select the highest temperature ,steam should never be used on delicate

fabrics like nylons, acrylics and synthetics .

1. Filled your iron with water

2. Plug your iron into the mains supply and switch on

3. Use the +/- buttons to select the  or MAX setting ,The hotter your iron ,The more steams is generated

4. When the  or MAX light stops ﬂashing ,your irons is at the correct temperature and ready to use,

During use, the  or MAX light will ﬂash periodically as your iron maintains the selected temperature

5. Adjust the steam control lever to select the desired steam output

6. Move the steam control lever to the high steam setting to increase the amount of steam ,or towards

the off (0) setting to decrease the amount of steam ,

7. The steam can be shut off at any time by setting the steam control to the off (0) postion

Spraying

The spray function will only operate when there is water in the water tank

1. The water spray can be used to help iron heavy fabrics or difﬁcult areas(collars, pockects, sleeves, creases,

etc ).It can also be uses when ironing delicate fabrics which can not be steam ironed.

2. Simply press the button as required to produce as spray of water .if the spray is being used for the ﬁrst time

,or if the iron has been standing for some time ,you may need to press the spray button a few times before

it works correctly

Burst of steam

Your iron must be set to either  or MAX ,Wait several seconds between each press of the steam button

.press the shot of steam button whenever you have a stubbom crease that needs extra steam ,Steam will burst

from the holes in the soleplate of your iron into the fabric.

Vertical steam ironing

Never iron garments when they are being worn

Your iron can be used for vertical steam ironing curtains ,dresses on the hangers etc.

1. Fill your iron with water

2. Plug your iron into the mains supply and switch on

3. Use the +/- buttons to select the  or MAX setting ,The hotter your iron ,The more steams is generated

4. When the  or MAX light stops ﬂashing ,your irons is at the correct temperature and ready to use,

During use, the  or MAX light will ﬂash periodically as your iron maintains the selected temperature

5. Hold your iron 15cm(6 inches) from the fabric

6. Press the shot of steam button ,The steam will penetrate the fabric removing the creases. To apply more

steam press the shot of steam button again ,wait several seconds between each press of the button

ANTI-CALC SYSTEM

A special ﬁlter inside the water tank softens the water and prevents scale build-up in the soleplate. The ﬁlter is

permanent and does not need replacing.

Note: Use tap water only. Distilled and demineralized water makes the anti-calc system ineffective by altering

its physicochemical characteristics.

ANTI-DRIPPING SYSTEM

This iron is equipped with drip stop function: the iron automatically stops steaming when the temperature is too

low to prevent water from dripping out of the soleplate.

With the anti-dripping system, you can perfectly iron even the most delicate fabrics.

Safety auto shut-off function

ALWAYS disconnect your iron from the mains supply socket after use, NEVER leave the iron unattended with

the auto shut-off function in operation

Your iron will shut off if it has not been used for 15 minutes when resting on its heel ,or 30 seconds with the

soleplate face down ,The STANDBY light will ﬂash indicating that your iron is now in auto-shut off mode.

To restart your iron, either press the +/- buttons or mover your iron gently. The iron will revert back to its

previous setting .

PART 4: HOW TO CLEAN AND STORE

After using, lift the iron with the ﬁlling hole downwards to empty the remaining water from the Water tank.

Insert the plug into the socket, and set the Temperature Control Dial to “MAX” for 1-2 minutes to evaporate the

remaining water, and then unplug the iron and let it cool down before storing it.

ATTENTION:

When the plug connecting with the power socket, the user is not allowed to leave.

When the power cord is damaged, contact your dealers or an authorized service center for repair.

In case of any repairs, replacement of cord or plug, or adjustment, please consult a qualiﬁed technician, or take

appliance to an authorized service facility.

NOTE:

1. This appliance is not intended for use by persons (including children) with reduced physical. Sensory

or mental capabilities ,or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

2. Children should be supervised to ensure that they do not play with the appliance

3. The iron must not be left unattended while it is connected to the supply mains

4. The plug must ne removed from the socket-outlet before the water reservoir is ﬁlled with water

5. The ﬁlling aperture must not be opened during use ,

6. The iron must be use and rested on a stable surface

7. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable

8. The iron is not be used if it has been dropped .if there are visible signs of demage or it is leaking

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED

PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric or electronic products must

not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over these

products to determined collection points. Or as an alternative in some European Union states or other

European countries you may return your products to the local retailer when buying an equivalent new

product. Correct disposal of this product helps save valuable natural resources and prevents damage

to the environment caused by improper waste disposal. Ask your local authorities or collection facility

for more details. In accordance with national regulations penalties may be imposed for the incorrect

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the

necessary information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you wish to dispose of this product, request the

necessary information about the correct disposal method from the local council or from your retailer.

This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.

Changes in the text, design and technical speciﬁcations may be made without prior notice and we reserve the

right to make such changes.

Inhaltsverzeichnis

Andere Philco Eisen Handbücher

Philco

Philco PHSS 4516 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Philips

Philips GC6012 Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Philips

Philips HI5914/30 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung