Philips AC1213 Bedienungsanleitung

3000 059 51371

AC1213

EN User manual 1 ZH-T 使用手冊 17

1 2

J K L M N

EFG

Contents

1 Important 2

2 Your air purier 5

Product overview (Fig.a) 5

Controls overview (Fig.b) 5

3 Getting started 5

Installing the lters 5

4 Using the air purier 6

Understanding the air quality light 6

Turning on and o 6

Changing the fan speed 7

Light sensor 7

Night sensing mode 7

Setting the child lock 8

Switching the display mode 8

5 Cleaning 9

Cleaning the body of the air

purier 9

Cleaning the air quality sensor 9

Cleaning the pre-lter 10

6 Replacing the lters 11

Filter replacement indicator 11

Replacing the lters 11

Filter reset 12

7 Storage 12

Environmental friendly paper used. Thanks for your contribution to save trees.

1EN

English

8 Troubleshooting 13

9 Guarantee and service 15

Order parts or accessories 15

10 Notices 15

Electromagnetic elds (EMF) 15

Recycling 16

2EN

service center authorized

by Philips, or similarly

qualified persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

• Make sure that foreign

objects do not fall into the

appliance through the air

outlet.

1 Important

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or flammable

detergent enter the

appliance to avoid electric

shock and/or a fire

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(flammable) detergent to

avoid electric shock and/

or a fire hazard.

• Do not spray any

flammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all filters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips filters specially

intended for this

appliance. Do not use any

other filters.

• Combustion of the filter

may cause inreversible

human hazard and/or

jeopardize other lives. Do

not use the filter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

• Do not insert your fingers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use

the appliance on a

dry, stable, level, and

horizontal surface.

• Leave at least 20cm

free space behind and

on both sides of the

appliance and leave at

least 30cm free space

above the appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injuiry.

• Do not place the

appliance directly below

3EN

English

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply first.

• Do not move the

appliance by pulling its

power cord.

• Always wash your hands

thoroughly after changing

or cleaning a filter.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

fireplaces.

• Always unplug the

appliance after use

and before cleaning,

or carrying out other

maintenance or replacing

the filters.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

4EN

3 Getting started

Installing the lters

Note

• Make sure the air purifier is unplugged

from the electrical outlet before

installing the filters.

• Make sure the side of the filter with the

tag is pointing towards you.

1 Pull the bottom part of the front

panel and gently lift to remove it

from the air purifier (Fig.c).

2 Press the clip down (1) and pull the

pre-filter towards you (2) (Fig.d).

3 Remove all filters (Fig.e).

4 Remove all packaging materials

from the filters (Fig.f).

5 Place the thick HEPA filter (FY1410)

into the air purifier and then the

thin Active Carbon filter (FY1413)

(Fig.g). The model numbers are

shown on each filter.

6 Attach the pre-filter back into the

air purifier (Fig.h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-filter are properly

attached to the purifier.

7 Reattach the front panel by

pressing the top part of the panel

onto the top of the air purifier (1).

Then, gently push the panel against

the body of the air purifier (2)

(Fig.i).

8 Wash your hands thoroughly after

installing filters.

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Product overview (Fig.a)

AControl panel

BAir quality light

CAir outlet

DAir quality sensor

ENanoProtect filter HEPA Series 3

(FY1410)

FNanoProtect filter Active Carbon

(FY1413)

GPre-filter

HAir inlet

IFront panel

Controls overview (Fig.b)

JOn/Off button

KNight sensing mode button

LDisplay screen

MFan speed button

NChild lock button

5EN

English

Turning on and o

Note

• Always place the air purifier on a

stable, horizontal, and level surface

with the front of the unit facing away

from walls or furniture.

• For optimum purification performance,

close doors and windows.

• Keep curtains away from the air inlet or

air outlet.

1 Put the plug of the air purifier in the

wall outlet.

2 Touch to switch on the air purifier

(Fig.j).

»The air purifier beeps.

»The air purifier operates under

the auto mode by default.

»When the air purifier is warming

up, " " displays on the screen.

»After measuring the air

quality for approximately

30 seconds, the air quality

sensor automatically selects

the appropriate air quality light

color.

3 Touch and hold for 3 seconds to

switch off the air purifier.

Note

• If the air purifier stays connected to

the electrical outlet after turning OFF,

the air purifier will operate under the

previous settings when turned ON

again.

• If the air purifier accidentally shuts off

during running, it restarts automatically

and operates under previous settings

when the power supply is resumed.

4 Using the air

purifier

Understanding the air

quality light

Indoor Allergen Index (IAI) is a

real-time numerical display that

provides visual and immediate feedback

on indoor allergen level. It Indicates

potential indoor allergen risk level

which is converted from indoor particle

pollutants concentration. Higher IAI

means higher risk.

IAI PM2.5 Air quality

light color

Air

quality

level

1-3 0-12 Blue Good

4-6 13-35 Blue-violet Fair

7-9 36-55 Red-purple Poor

10-12 >56 Red Very

poor

The air quality light automatically goes

on when the air purifier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

6EN

Light sensor

With the light sensor, the air purifier can

work according to the ambient light.

When the ambient light dims for

10 seconds, all the lights on the control

panel will turn off slowly. During this

period, you can touch any of the

buttons, all lights will turn on again. If

you don't perform other operations

within 10 seconds, all lights will turn off.

After the ambient light becomes bright

and lasts at least for 10 seconds, all

lights will turn on again.

Night sensing mode

You can activate the night sensing

mode in two ways.

Activating the night sensing

mode manually

• Before you go to sleep, touch

manually to activate the night

sensing mode (Fig.o).

»If the air quality light is blue,

the air purifier directly goes to

the night sensing mode. The air

purifier operates quietly and the

air quality light will be dimmed.

»If the air quality light is not blue,

the air purifier operates under

turbo mode for a maximum of

10 minutes, the air quality light

blinks slow during this time, and

then goes to the night sensing

mode.

Changing the fan speed

There are several fan speeds available.

You can choose the auto mode, speed

1, 2, 3 or turbo mode (t).

Auto(A)

• Touch the fan speed button

repeatedly to select the auto mode

(Fig.k).

Allergen mode

The specially designed allergen

mode can effectively reduce common

allergens such as pollen and pet

dander.

• Touch the fan speed button to

select the Allergen mode (Fig.l).

»Auto (A) and display on the

screen.

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (Fig.m).

Turbo (t)

In turbo mode, the air purifier operates

on the highest speed.

• Touch the fan speed button to

select the turbo mode (t) (Fig.n).

7EN

English

Note

• The child lock function is automatically

unlocked when the pre-filter cleaning

code or the filter replacement code

displays on the screen.

Switching the display

mode

The air purifier has dual display mode,

IAI display and PM2.5 display.

Note

• The air purifier operates in IAI display

mode by default.

• If the PM2.5 level is higher than 99,

"-- " will be displayed on the screen.

1 Touch for 3 seconds to switch to

PM2.5 display mode (Fig.r).

»The actual PM2.5 level displays

on the screen.

2 Touch for 3 seconds again to

switch back to IAI display mode

(Fig.s).

»The IAI level displays on the

screen.

Auto activating the night

sensing mode

When the air purifier operates in auto

mode or allergen mode, if the light

sensor detects the lights in your room

are turned off, the air purifier goes to

the night sensing mode automatically.

The air purifier will adjust the fan speed

in real-time to make sure the air in your

room is good. The air quality light will be

dimmed.

Note

• The light sensor detects the lights in

your room after 11 hours in the night

sensing mode.

• If the lights in your room are turned

on, the air purifier will quit the night

sensing mode and operate under the

previous mode. The air quality light

and the display will be on again.

• To exit the night sensing mode

manually, touch or button.

Setting the child lock

1 Touch and hold the child lock

button for 3 seconds to activate

child lock (Fig.p).

»The child lock icon displays

on the screen.

»When the child lock is on,

all the other buttons are not

responsive, only the child lock

icon blinks.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock (Fig.q).

»The child lock icon

disappears.

8EN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Luftreiniger Handbücher

Philips

Philips 2000 series Bedienungsanleitung

Philips

Philips AC3256 Bedienungsanleitung

Philips

Philips AC4076 Bedienungsanleitung

Philips

Philips AC4072/18 Bedienungsanleitung

Philips

Philips AC3829 Bedienungsanleitung

Philips

Philips HR4342/70 Bedienungsanleitung

Philips

Philips AC2958 Bedienungsanleitung

Philips

Philips MicroCube AC5659 Bedienungsanleitung

Philips

Philips MicroCube AC5659 Bedienungsanleitung

Philips

Philips UVCA110 Technisches Handbuch

Philips

Philips AC4001 Bedienungsanleitung

Philips

Philips MicroCube AC5659 Bedienungsanleitung

Philips

Philips 2000i Series Bedienungsanleitung

Philips

Philips AC1217/10 Bedienungsanleitung

Philips

Philips AP2266 Bedienungsanleitung

Philips

Philips AC6676 Bedienungsanleitung

Philips

Philips 600i Series Bedienungsanleitung

Philips

Philips AC2889/90 Bedienungsanleitung

Philips

Philips GoPure GP5211 Bedienungsanleitung

Philips

Philips AC4025 Bedienungsanleitung

Philips

Philips AC3033 Bedienungsanleitung

Philips

Philips AC2889/10R1 Bedienungsanleitung

Philips

Philips AC4002 Bedienungsanleitung

Philips

Philips AC3033/10 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Hitachi

Hitachi EP-A3000 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung