Philips AC2889/10R1 Bedienungsanleitung

EN User manual 1

CS Příručka pro uživatele 18

HU Felhasználói kézikönyv 35

PL Instrukcja obsługi 53

RO Manual de utilizare 73

SK Príručka užívateľa 93

UK Посібник користувача 113

1 2

J L M O PN RQ SK

FE G H1

4241 210 98014

AC2889

1EN

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product overview (g. a) 5

Controls overview (g. b) 5

3 Getting started 6

Installing the lters 6

Wi-Fi connection 6

4 Using the air purier 7

Understanding the air quality light 7

Turning on and o 7

Changing the Auto mode setting 8

Changing the fan speed 8

Setting the timer 9

Using the light on/o function 9

Switching the display mode 9

5 Cleaning 10

Cleaning the body of the air

purier 10

Cleaning the air quality sensor 10

Cleaning the pre-lter 10

6 Replacing the lters 11

Filter replacement indicator 11

Replacing the lters 11

Filter reset 12

7 Storage 13

8 Troubleshooting 14

9 Guarantee and service 16

Order parts or accessories 16

10 Notices 16

Electromagnetic elds (EMF) 16

Recycling 17

Notice 17

Simplied EU declaration of

conformity 17

Environmental friendly paper used. Thanks for your contribution to save trees.

2EN

1 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or ammable

detergent enter the

appliance to avoid electric

shock and/or a re hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(ammable) detergent to

avoid electric shock and/

or a re hazard.

• Do not spray any

ammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualied persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power cord,

or the appliance itself is

damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

• Make sure that foreign

objects do not fall into the

appliance through the air

outlet.

3EN

English

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum

output power of 17 mW

EIRP.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface.

• Leave at least 20cm free

space behind and on both

sides of the appliance

and leave at least 30cm

free space above the

appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injury.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all lters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips lters specially

intended for this

appliance. Do not use any

other lters.

• Combustion of the lter

may cause inreversible

human hazard and/or

jeopardize other lives. Do

not use the lter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

• Do not insert your ngers

or objects into the air

outlet or the air inlet to

4EN

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply rst.

• Do not move the

appliance by pulling its

power cord.

• Always cleanse your

hands after changing the

lters.

• Unplug the appliance to

override smart enabled or

remote functions.

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

replaces.

• Always unplug the

appliance after use

and before cleaning,

or carrying out other

maintenance or replacing

the lters.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

5EN

English

Controls overview

(g. b)

JOn/O button

KLight dimming button

LAuto mode button

MDisplay screen

NPollution mode icon

OAllergen mode icon

PBacteria & Virus mode icon

QFan speed button

RTimer button

SReset button

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benet from the support that

Philips oers, register your product at

www.philips.com/welcome.

Product overview (g. a)

AAir outlet

BControl panel

CAir quality light

DAir quality sensors

ENanoProtect lter Series 3

(FY2422)

FNanoProtect lter active carbon

(FY2420)

GPre-lter

HH1, H2 and H3 air inlets

IFront panel

6EN

Wi-Fi connection

Setting up the Wi-Fi connection

for the rst time

1 Download and install the Philips

"Clean Home+" app from the App

Store or Google Play.

2 Put the plug of the air purier in the

power socket and touch to turn

on the air purier.

»The Wi-Fi indicator blinks

orange for the rst time.

3 Make sure that your smartphone or

tablet is successfully connected to

your Wi-Fi network.

4 Launch the "Clean Home+" app and

click on "Connect a New Device"

or press the "+" button on the top

of the screen. Follow the onscreen

instructions to connect the air

purier to your network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the "Clean Home+"

app for extensive and up-to-date

troubleshooting tips.

3 Getting started

Installing the lters

Note

• Make sure the air purier is

unplugged from the electrical outlet

before installing the lters.

• Make sure the side of the lter with

the tag is pointing towards you.

1 Pull the bottom part of the front

panel to remove it from the air

purier (g. c).

2 Press the two clips down (1) and pull

the pre-lter towards you (2)

(g. d).

3 Remove all lters (g. e).

4 Remove all packaging materials

from the lters (g. f).

5 Place the thick lter (FY2422) into

the air purier and then the thin AC

lter (FY2420) (g. g). The model

numbers are shown on each lter.

6 Attach the pre-lter back into the

air purier (g. h).

Note

• Make sure the side with the two

clips is pointing towards you, and

that all hooks of the pre-lter are

properly attached to the purier.

7 Reattach the front panel by pressing

the top part of the panel onto the

top of the air purier (1). Then, gently

push the panel against the body of

the air purier (2) (g. i).

8 Wash your hands thoroughly after

installing lters.

7EN

English

Note

• This instruction is only valid when

the air purier is being set up for the

rst time. If the network has changed

or the setup needs to be performed

again, consult section "Reset the Wi-

Fi connection" on page 7.

• If you want to connect more than

one air purier to your smartphone

or tablet, you have to do this one by

one. Complete the set up of one air

purier before you turn on the other

air purier.

• Make sure that the distance

between your smartphone or tablet

and the air purier is less than 10 m

without any obstructions.

• This app supports the latest

versions of Android and iOS. Please

check www.philips.com/cleanhome

for the latest update of supported

operating systems and devices.

Reset the Wi-Fi connection

Note

• This applies when the default

network to which your purier is

connected has changed.

• Reset the Wi-Fi connection when

your default network has changed.

1 Put the plug of the air purier in the

power socket and touch to turn

on the air purier.

2 Touch and simultaneously for

3 seconds until you hear a beep.

»The air purier goes to pairing

mode.

»The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting up

the Wi-Fi connection for the rst

time" section.

4 Using the air

purifier

Understanding the air

quality light

PM2.5

level

Air quality light

color

Air quality

level

≤12 Blue Good

13-35 Blue-Purple Fair

36-55 Purple-Red Poor

>55 Red Very poor

The air quality light automatically goes

on when the air purier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

Turning on and o

Note

• Always place the air purier on a

stable, horizontal, and level surface

with the front of the unit facing

away from walls or furniture.

• For optimum purication

performance, close doors and

windows.

• Keep curtains away from the air inlet

or air outlet.

1 Put the plug of the air purier in the

wall outlet.

2 Touch to switch on the air purier

(g. j).

»The air purier beeps.

8EN

»The air purier operates under

the Pollution mode by default.

»When the air purier is warming

up, " " displays on the

screen. After measuring the

particulate matter only in the

air, the air purier shows the

PM2.5 level and operates in the

auto mode with displayed on

the screen (g. k).

»After measuring the air

quality for approximately

30 seconds, the air quality

sensor automatically selects

the appropriate air quality light

color.

3 Touch and hold for 3 seconds to

switch o the air purier.

Note

• If the air purier stays connected

to the electrical outlet after turning

OFF, the air purier will operate

under the previous settings when

turned ON again.

Changing the Auto mode

setting

You can choose the Pollution mode

( ), the Allergen mode ( ), or the

Bacteria & Virus mode ( ).

Pollution mode

The specially designed pollution

mode can eectively remove airborne

pollutants such as PM2.5.

• Touch the Auto mode button to

select the Pollution mode (g. l).

»Auto (A) and display on the

screen.

Allergen mode

The extra-sensitive allergen mode

is designed to react to even a small

change in allergen levels in the

surrounding air.

• Touch the Auto mode button to

select the Allergen mode (g. m).

»Auto (A) and display on the

screen.

Bacteria & Virus mode

The bacteria & virus mode boosts the

airow to quickly reduce bacteria &

viruses.

• Touch the Auto mode button to

select the Bacteria & Virus mode

(g. n).

»Auto (A) and display on the

screen.

Changing the fan speed

In addition to the Auto modes, there are

several fan speeds available.

When using the manual fan speed

settings, the purier will still monitor the

air quality, but it will not automatically

adjust the fan speed if it detects

changes in the air quality.

Sleep (SL)

In sleep mode, the air purier operates

quietly on a very low speed.

• Touch the fan speed button to

select the sleep mode ( ) (g. o).

Note

• All the lights will go o in sleep

mode.

• You can turn on the lights manually

by touching .

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Luftreiniger Handbücher

Philips

Philips 2000i Series Bedienungsanleitung

Philips

Philips AC3829/10 Bedienungsanleitung

Philips

Philips AC2889/41 Bedienungsanleitung

Philips

Philips AC5659/20 Bedienungsanleitung

Philips

Philips GoPure GP3211 Bedienungsanleitung

Philips

Philips AC4004 Bedienungsanleitung

Philips

Philips HR 4340/A Bedienungsanleitung

Philips

Philips AC5666 Bedienungsanleitung

Philips

Philips AC3854 Bedienungsanleitung

Philips

Philips AC1215 Bedienungsanleitung

Philips

Philips 600 Series Bedienungsanleitung

Philips

Philips AC4072 Bedienungsanleitung

Philips

Philips GoPure 7101 Bedienungsanleitung

Philips

Philips AC4074 Bedienungsanleitung

Philips

Philips AC4081/80 Bedienungsanleitung

Philips

Philips AC1382 Bedienungsanleitung

Philips

Philips BiPAP A30 Bedienungsanleitung

Philips

Philips AC4064 Bedienungsanleitung

Philips

Philips GoPure GP6201 Bedienungsanleitung

Philips

Philips AC4025/10 Bedienungsanleitung

Philips

Philips AC3055 Bedienungsanleitung

Philips

Philips AC6601 Bedienungsanleitung

Philips

Philips AC4012 Bedienungsanleitung

Philips

Philips AC4004 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung

Muonio

Muonio UV-L 110 Bedienungsanleitung