Philips GoPure GP5301 Bedienungsanleitung

页面尺寸：160mm x 66mm

简体中文

User Manual

EN Read these instructions for use carefully

before using the product and save them for

future reference.

简体中文 使用前请仔细阅读使用说明，

保留说明书以便日后查阅。

GoPure

Car air purier

GP5301

飞利浦汽车生活

官方微信公众号

Warranty and service

The Lumileds warranty applies, provided:

• The product is handled properly for its intended

use only.

• The product is used in accordance with its

operating instructions.

• You present the original invoice with the product.

The Lumileds warranty does not apply if the product

is damaged due to accident, error, or misuse.

For more information and assistance, or if you have

a problem with the product, you can visit the Philips

website at www.philips.com/automotive, or contact

the retail outlet where you purchased the product.

Or for the users in China, please call the customer

service hotline: 400 690 8826

Lumileds (Shanghai) Management Co., Ltd

No. 19-20, Lane 299,

Wenshui Road, JiangAn District, Shanghai

English

Before you start

Thank you for buying Philips GoPure Car air purier.

Before you install GoPure in your car, take time to

read this guide.

The GoPure Car air purier will help you protect

your health by improving the quality of the

air you breathe in your car. It is known that air

pollution levels inside cars are often much higher

than outside.

The GoPure Car air purier removes harmful gases

and ne particles such as microorganisms. It also

reduces bad odors to make the time in your car

more pleasant and healthier.

1 m Important information

m Warning

Philips GoPure car air

purier is not a toy!

Do not let children

play with it.

m Warning

Keep Philips GoPure car

air purier free of any

object. Do not cover!

m Warning

For your safety, do not

manipulate the device

while driving.

Always stop your

car rst!

c Danger

Do not clean or spill

any liquids such as

water, detergents, or

ammable solvents on

the device.

m Important

To clean the GoPure car

air purier:

• Disconnect GoPure

car air purier

• Use soft cloth only.

m Important

Help to preserve the

environment. Do not

discard the device with

household waste. Bring

it to the ocial waste

recycling service near

by you. Filters may

be disposed of with

household waste.

m Warning

Philips GoPure car

air purier device

contains high-precision

technology.

Handle with care.

Do not drop or tamper!

Cautions:

• this appliance can

be used by children

aged from 8 years and

above and persons

with reduced physical,

sensory or mental

capabilities or lack

of experience and

knowledge if they have

been given supervision

or instruction concerning

use of the appliance

in a safe way and

understand the hazards

involved

• children shall not play

with the appliance

• cleaning and user

maintenance shall not

be made by children

without supervision

• the appliance is only

to be used with the

detachable power

supply provided

• must only be supplied

at SELV

Environment

キҀ󰩕

User Manual

EN Read these instructions for use carefully

before using the product and save them for

future reference.

キҀ󰩕Ҭ⩕ݺ䄤Ё㏳䬲䄨Ҭ⩕䄡ᬻ喑

Ԋ⪆䄡ᬻΓВӬᬒᴒ䬲ȡ

GoPure

Car air purier

GP5301

下ݖ⊓↪䒓⩌≨

Ⴥ󰪇ᓛԎڙф

User

Manual

Discover Gopure car air purier

2.1 Discover the content of Philips GoPure car

air purier package

m Warning

Make sure the device is

installed according to

the instructions

in this guide.

For your safety, use only

the items delivered in

this package to install

the device. In case of

incorrect installation,

Lumileds declines all

responsability for

any harm or accident.

Mounting belt

USB-C

power cable

High eciency

lter (Remove

plastic bag

before use)

Air quality

indicator/

Filter alert

USB-C

port

Air quality

detector

On/O/

Mode

control

Silent mode

Boost mode

Auto mode

Air outlet

Air inlet

How to install Philips GoPure

car air purier in your car

Notice:

1 The mounting belt

may not be suitable to

the armrest of all car

models.

2 Please don’t put device

on car dashboard or

airbag.

Warning

For your safety, only use

the equipment delivered

in your package. Never

use other equipment,

such as tape, cord,

or others.

3.1

Installation-using the

headrest or armrest

1 Take o top cover and

remove the lter’s plastic

wrapping.

2 Place the mounting

belt

over the device as

shown, with the furry

surface facing the device.

3 You may install Philips

GoPure car air purier on

headrest or armrest of

your car.

3.2 Connection and operation

Connect the USB-C

power cable to the

device as shown.

2 Connect the power cable

to a USB outlet in your

car. (To ensure optimal

performance, the device

power input needs to be

higher than 5V/1A.)

m Warning

For your safety, do

not try to switch o

or operate the device

manually while driving.

Always park your

car rst!

In-car USB DATA port

is not recommended as

power input.

mImportant

When using Philips

GoPure car air purier

•

Keep your car ventilation

in low speed

• Keep car windows closed.

4 Using GoPure car air purier functions

When the vehicle power supply is on, the device starts

automatically in auto mode.

1 To turn on the device, touch the

power button, the device will start

running in auto mode.

2 Touch the power button to switch

the speed mode in sequence of

auto, boost and silent.

3 To turn o the device, touch and

hold the power button for

2 seconds.

Understanding GoPure healthy-air indicator

The healthy-air indicator shows the air quality inside

your car at all times.

Yellow

76-150 ug/m3

0-75 ug/m3

>150 ug/m3

Moderate pollution

Blue

Excellent

Replace lter

Red

Severe pollution

After the device is turned

on, the AQI will alert in

yellow blinking light.

m Important

You must reset the

Philips GoPure device

after every lter

replacement.

1. Plug the device into the

power supply and turn

o the device.

2. Touch and hold power

button for 5 seconds

until you hear a beep

sound. The device

will be turned into

lter reset process.

Wait for another 5

seconds until the AQI

color changes to blue,

indicates lter reset

successful.

3. Repeat the above steps

if the lter rest fails

5.2 How to reset GoPure car

air purier after

a lter replacement

5 Filter replacement and reset

Philips GoPure Car air

purier is composed of

a multi-layer ltration

system that guarantees

the most eective air-

purication. All lter layers

are assembled in one single

simple-to-replace lter.

mImportant

Philips GoPure car

air purier indicates

automatically when you

must change the lters.

5.1 How to replace the lter

1 Disconnect GoPure car

air purier device.

2 Lifting up the rear side of

top cover and remove it.

When the lter needs

to be replaced, the AQI

indicator will alert in

yellow blinking light.

Replace the lter immediately

using only genuine Philips

GoPure lter.

It helps maintain the

maximal performance of

your Car air purier and

helps to provide the purest

air quality inside your car.

3 Remove the old lter

as shown.

4 Using the groove,

insert a new original

GoPure lter.

m Important

The lter slides in only

one way, do not force it

in. See above.

5.2 How to reset GoPure car

air purier after

a lter replacement

3 Remove the old lter

as shown.

6 Philips GoPure car air purier

troubleshooting

Problem 1

Philips GoPure car air

purifier does not switch to

boost speed.

Solution 1

• Check it is not

connected to in-car USB

data port which is usually

not designed as

power source.

• Connect to in-car

USB port with charging

function.

• Or check your USB

power input, it needs to

be higher than 5V/1A.

Problem 2

When the AQI turns to

yellow or red color, my

GoPure Car air purifier

keeps rebooting.

Solution 2

• Verify that the USB port

is not DATA port, connect

only to USB port with

charging function (or

current over 1A).

• Check the power

connection and make

sure the USB cable is

properly inserted.

• If your device still

does not restart, please

contact your retailer.

Problem 3

Some cars continue to

power the 5V outlet when

the engine is o.

Solution 3

To avoid draining the

battery, Philips GoPure car

air purier will automatically

power o after two hours of

continuous running.

To restart your device,

press the power button.

Problem 4

After filter

replacement,Philips

GoPure filter AQI indicator

remains yellow blinking

light at restart.

Solution 4

Turn o the device and

follow lter reset steps in

section 5.2. Pls make sure

the power cable remains

connected during the

whole process.

• Repeat the reset steps

section 5.2.

Problem 5

The Philips GoPure motor

stops running for a short

while.

Solution 5

This is normal: the device

has a voltage protection.

At times, the voltage

supply from vehicle may

vary and uctuant, in

these cases, the device

will turn o automatically.

Touch the power button

to restart the device.

Problem 6

Philips GoPure air quality

indicatorr does not

change for a very long

time.

Solution 6

It may simply indicate

stable air quality.

It may also indicate that

the air intake slots are

obstructed or polluted.

• Make sure the air

circulation around the

device is free.

•

Restart the device.If the

problem remains, please

contact your retailer or

service center.

Problem 7

Philips GoPure air quality

indicator changes frequently.

Solution 7

This is normal and

the device is working

properly. When the

air quality is poor,

the device performs

its cleaning process.

However, the air quality

indicator reects the air

quality near the device.

At times, this may bring

a frequent air quality

display change. Let the

GoPure car air purier

perform its cleaning

process. When the air

reaches good quality, the

air quality indicatorr will

turn blue as described.

Problem 8

Philips GoPure air quality

indicator shows a blue light,

but some odor remains in

the car.

Solution 8

Philips GoPure air quality

indicatorr only reects

dust-related pollution

in the air. It does not

indicate chemical

pollution. However,

Philips GoPure car air

purier still removes dust

and chemical pollutants

while running.

•

Let the device perform its

cleaning process and the

air quality will

improve rapidly.

Problem 9

Philips GoPure car air

purifier has been running

for a long time, yet my

new car continues to

produce unpleasant odor.

Solution 9

Some unpleasant odor

in new cars may come

out continuously from a

variety of sources.

GoPure car air purier

device continues to

purify the air. However,

some odors may be

produced continuously.

GoPure car air purier

reduces the air pollutants

considerably.

• To speed up the air

cleaning process in a

new car, you may run

GoPure car air purier in

Boost mode (section 4 in

page 7).

Inhaltsverzeichnis

Andere Philips Luftreiniger Handbücher

Philips

Philips AC4004 Bedienungsanleitung

Philips

Philips AC0819/73 Bedienungsanleitung

Philips

Philips AC4064 Bedienungsanleitung

Philips

Philips AC4054 Bedienungsanleitung

Philips

Philips AC3055 Bedienungsanleitung

Philips

Philips BiPAP A30 Bedienungsanleitung

Philips

Philips AC4600 Bedienungsanleitung

Philips

Philips 600i Series Bedienungsanleitung

Philips

Philips AC3033/10 Bedienungsanleitung

Philips

Philips AC0820 Bedienungsanleitung

Philips

Philips AC1217/10 Bedienungsanleitung

Philips

Philips AC4004 Bedienungsanleitung

Philips

Philips AP2266 Bedienungsanleitung

Philips

Philips AC2729/10 Bedienungsanleitung

Philips

Philips AC1715 Bedienungsanleitung

Philips

Philips AC4076 Bedienungsanleitung

Philips

Philips AC3256 Bedienungsanleitung

Philips

Philips KJ550F-D21 Bedienungsanleitung

Philips

Philips AMF220 Bedienungsanleitung

Philips

Philips AC3259 Bedienungsanleitung

Philips

Philips AC3259/10 Bedienungsanleitung

Philips

Philips AC2882/70 Bedienungsanleitung

Philips

Philips AC1382 Bedienungsanleitung

Philips

Philips AC3055 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung

Muonio

Muonio UV-L 110 Bedienungsanleitung