Philips CMQ205 Bedienungsanleitung

CMQ205

www.philips.com/welcome

EN User manual 3

ES Manual del usuario 13

PT-BR Manual do Usuário 25

RU Руководство пользователя 37

ZH-CN 用户手册 51

CMQ205_00_UM_V2.0.indb 1 12/22/2010 9:41:38 AM

3
English
EN
Contents
1 Important 4
Safety 4
Notice 4
2  Your car power amplier  5
Introduction 5
What’s in the box 5
Overview of the main unit 5
3 Installation 6
Mount the amplier in car  6
Connect speakers 7
Connect car audio 7
Connect power 7
4  Use your power amplier  9
Select lter mode  9
Select LPF frequency 9
Adjust input level 9
Adjust bass boost 9
About the protector indicator 9
Replace fuse 10
5 Product information 10
6 Troubleshooting 11
CMQ205_00_UM_V2.0.indb   3 12/22/2010   9:41:38 AM

Notice

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and

old equipment.

Any changes or modications made to this

device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s

authority to operate the equipment.

2010 © Koninklijke Philips Electronics N.V.

Specications are subject to change without

notice. Trademarks are the property of

Koninklijke Philips Electronics N.V. or their

respective owners. Philips reserves the right

to change products at any time without being

obliged to adjust earlier supplies accordingly.

1 Important

Safety

Read and understand all instructions•

before you use the apparatus. If damage

is caused by failure to follow instructions,

the warranty does not apply.

This unit is designed for negative ground•

(earth) 12 V DC operation only.

Use only the supplied mounting hardware•

for a safe and secure installation.

Do not connect any active speakers (with•

built-in amplier) to the speaker terminals

of the unit. Doing so may damage the

active speakers.

To ensure safe driving, adjust the volume•

to a safe and comfortable level.

To avoid short circuit, do not expose the•

apparatus, remote control or remote

control batteries to rain or water.

Never expose the apparatus to direct•

sunlight, naked ames or heat.

Clean the apparatus with soft, damp•

cloth. Never use substances such as

alcohol, chemicals or household cleaners

on the apparatus.

CMQ205_00_UM_V2.0.indb 4 12/22/2010 9:41:38 AM

Overview of the main unit

aINPUT L/R

Connect car audio with RCA cable.•

bOUTPUT L/R

To connect additional amplier with •

RCA cable for additional speakers.

cINPUT LEVEL

Adjust input level (0.3V to 6V).•

dFILTER MODE

Set frequency lter at LPF (low-pass-•

lter), HPF (high-pass-lter), or OFF

(at) mode.

eLPF FREQUENCY

Set LPF (low-pass-lter) frequency •

from 80Hz to 180Hz.

fBASS BOOST

Boost frequency for around 50Hz,•

12dB.

gPOWER/PROTECTED

Light in green when the amplier is •

switched on.

Light in red when the amplier is •

abnormal and protected.

hSPEAKER OUTPUT

Connect to speakers or subwoofers.•

(30A)

2 Your car power

amplifier

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With the amplier, you can enjoy high quality

sound performance with powerful bass and

beats.

What’s in the box

Check and identify the contents of your package:

a Amplier

bScrew (25mm) x 4

cFuse x 1

English

CMQ205_00_UM_V2.0.indb 5 12/22/2010 9:41:39 AM

3 Installation

Note

Follow all mounting and wiring instructions.•

Mount the amplier in car

You can mount the amplier either under a seat

or on the rear tray.

Note

To avoid interference, do not place the•

amplier too close to the car audio or antenna.

The supplied mounting screws are 25mm long.

•

Make sure that the mounting board is thicker

than 25mm.

1Place the unit on the location for

installation.

2Mark the positions of the four screw

holes.

3Drill the holes with driller of

approximately 4mm in diameter.

4Mount the unit with the supplied screws.

iFUSE: 30AX1

jPOWER

To connect +12V-DC power wire,•

ground wire, and remote control

wire.

CMQ205_00_UM_V2.0.indb 6 12/22/2010 9:41:40 AM

Connect car audio

Option 1: Line input connection

Connect the amplier to the car audio with an

RCA cable (not supplied).

Car audio unit

LINE OUT

Option 2: Line output connection

Connect the amplier to another amplier.

Connect speakers

Note

Use speakers with an impedance of 2 to 8 ohm•

(4 to 8 ohm when used as a bridged amplier).

Match the “left”, “right”, “+” and “-” terminals

•

correctly. Revised polarity may degrade sound

quality.

Option 1: Stereo mode: connect 2 speakers

4 ohm

speaker

4 ohm

speaker

(30A)

Option 2: Mono bridged mode: connect

1 speaker

4 ohm

speaker

(30A)

Option 3:Tri-mode: connect 3 speakers

(30A)

4 ohm

speaker

8 ohm speaker

4 ohm

speaker

English

CMQ205_00_UM_V2.0.indb 7 12/22/2010 9:41:42 AM

Connect power

1Make the power connection as illustrated below:

Connect the ground wire from the car to the• GND socket.

Connect the remote wire from the car audio to the• REM socket.

With this connection, you can turn on/off the amplier with the car audio.•

Connect the power wire from the car battery to the• +12V socket.

Less than 450mm (18 in)

Fuse (40A)

+12V car battery

Car audio unit

Remote output

To a metal point of the car

(30A)

Tip

If your car audio does not have remote output, connect the remote input terminal (REM) to the accessory•

power supply.

To avoid short circuit, cover the power socket with the supplied shield and screws after connected power

•

wires. See below illustration:

CMQ205_00_UM_V2.0.indb 8 12/22/2010 9:41:43 AM

Adjust input level

To ensure sound quality, adjust input level to

match it with the car audio’s output voltage.

1Check the line output voltage of the

connected car audio.

2Rotate INPUT LEVEL to select a matched

voltage: 0.3V to 6V.

Adjust bass boost

To enjoy more bass sound:

1Set FILTER MODE at OFF or LPF mode.

2Slide BASS BOOST to 12dB position.

Tip

If•BASS BOOST is set at 0dB position, no extra

bass will be boosted.

Note

If•FILTER MODE is set at HPF mode, the bass

frequency will be ltered.

About the protector

indicator

The amplier has a built-in protection circuit to

protect the transistors and speakers in following

conditions:

The amplier is overheated.•

A DC current is generated in•

speakers.

The battery voltage is too low or too•

high. Or

The speaker terminals are short•

circuited.

When the PROTECTED indicator

lights up in red, the amplier shuts

down automatically. In this case

please:

4 Use your power

amplifier

Select lter mode

Select Filter Mode according to the connected

speaker type.

1Slide FILTER MODE to the selected

position.

• HPF (high-pass-lter): Select this

mode when mid-range speakers and

tweeters are connected for high

frequency output.

• LPF (low-pass-lter): Select this

mode when woofer and subwoofer

are connected for low frequency

output.

• OFF (at): Select this mode when

both tweeters and woofers are

connected.

Select LPF frequency

When FILTER MODE is set at LPF position, you

can select the range of frequency that is to be

ltered.

Note

When•FILTER MODE is set at OFF or HPF

position, LPF FREQUENCY does not work.

1Slide LPF FREQUENCY to the selected

position.

• 80Hz: More high frequency signal

is ltered. Select 80Hz if you prefer

stronger bass effect.

• 180Hz: Less high frequency signal is

ltered.

English

CMQ205_00_UM_V2.0.indb 9 12/22/2010 9:41:44 AM

5 Product

information

Note

Product information is subject to change•

without prior notice.

Power output

(RMS)

- 4 ohm 75W x 2

- 2 ohm 110W x 2

- 4 ohm

(bridged)

220W x 1

Total harmonic

distortion

0.09%

Signal to noise

ratio

100dB

Channel separation 50dB

Frequency

response

5-50kHz

Input sensitivity 300mV - 6V

Input impedance 22k ohm

Fuse rating 30A x 1

Dimensions (D x

W x H)

246 x 240 x

54mm

Weight 1.98kg

1Take out the disc or tape and turn off the

car audio.

2Check the cause of the malfunction.

3 If the amplier is overheated, let it cool

down.

Replace fuse

If there is no power, the fuse might be damaged

and need to be replaced.

1Pull out the damaged fuse.

2Replace the fuse with the supplied fuse or

buy a new fuse that matches the rating of

the damaged fuse (30A x 1).

If the fuse gets damaged immediately after it

has been replaced, the amplier might have

internal malfunction. Consult qualied personal

for repair.

CMQ205_00_UM_V2.0.indb 10 12/22/2010 9:41:44 AM

6 Troubleshooting

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site

(www.philips.com/welcome).When you

contact Philips, ensure that the apparatus

is nearby and the model number and serial

number are available.

Power indicator does not light up

The connected car audio is not turned on.•

The fuse is blown. Replace the fuse with•

a new one.

The input level is not set correctly (see•

“Adjust input level”).

The protector indicator lights up in red.

The speaker terminals are short circuited.•

Check the speaker connections.

The sound is too low.

The input level is not set correctly•

(see “Adjust input level”).

The sound is interrupted or stopped suddenly.

The thermal protector is activated.•

Reduce the volume.

The ventilation outlet is blocked. Remove•

any obstructions from the outlet.

Alternate noise is heard.

The power connecting wires are installed•

too close to the RCA pin cords.

The ground wire is not securely•

connected to a metal point of the car.

Negative speaker wires touch the car•

chassis.

The unit becomes abnormally hot.

Place the amplier in a well ventilated •

location.

Use speakers with suitable impedance:•

2-8 ohm (stereo), 4-8 ohm (bridged).

English

CMQ205_00_UM_V2.0.indb 11 12/22/2010 9:41:44 AM

Andere Handbücher für CMQ205

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Auto-Verstärker Handbücher

Philips

Philips CMQ205 Bedienungsanleitung

Philips

Philips TDA8567Q Bedienungsanleitung

Philips

Philips TDA1519 Bedienungsanleitung

Philips

Philips TDA1561Q Bedienungsanleitung

Philips

Philips CMP200 Bedienungsanleitung

Philips

Philips CMQ205 Bedienungsanleitung

Philips

Philips CMP100 Bedienungsanleitung

Philips

Philips CMP200 Bedienungsanleitung

Philips

Philips TDA1020 Bedienungsanleitung

Philips

Philips TDA8566 Betriebshandbuch

Philips

Philips CMQ205 Bedienungsanleitung

Philips

Philips TDA1552Q Bedienungsanleitung

Philips

Philips CID2680 Bedienungsanleitung

Philips

Philips CMQ405 Bedienungsanleitung

Philips

Philips TDA1563Q Bedienungsanleitung

Philips

Philips CID2680 Bedienungsanleitung

Philips

Philips TDA1516BQ Bedienungsanleitung

Philips

Philips TDA1510AQ Bedienungsanleitung

Philips

Philips TDA8571J Bedienungsanleitung

Beliebte Auto-Verstärker Handbücher anderer Marken

Cyfre

Cyfre CHACDMA-819 Bedienungsanleitung

MTX

MTX Thunder Marine TM904 Bedienungsanleitung

MTX

MTX Thunder TA Super TA92001 Bedienungsanleitung

Lanier

Lanier 480-0239 Bedienungs- und Wartungsanleitung

Kenwood

Kenwood KAC-642 Bedienungsanleitung

Pioneer

Pioneer GM-D8500M Bedienungsanleitung

Jensen

Jensen XA4150 Bedienungsanleitung

Sony

Sony XM-405EQX Marketing Specifications Bedienungsanleitung

Audiopipe

Audiopipe AQX-660.2 Bedienungsanleitung

Clarion

Clarion APA2001 APA2001 APA2001 Kurzanleitung

Sony

Sony XM-7547 Bedienungsanleitung

Alpine

Alpine PDX11000 - Amplifier Bedienungsanleitung

Steg

Steg Qx Mos 105.4x Bedienungsanleitung

JL Audio

JL Audio HD900/5 Bedienungsanleitung

Memphis

Memphis 16-MC5.700 Bedienungsanleitung

Audiopipe

Audiopipe APSM-1150 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems Riot GT1000M Bedienungsanleitung

Kenwood

Kenwood KAC-PS811D Bedienungsanleitung