Philips CE600N Bedienungsanleitung
CE600N
Car Audio/
Video System
Register your product and get support at
www.philips.com/support
User manual
1EN
Contents
1 Safety 2
2 Your car entertainment system 2
What's in the box 2
Overview 3
3 Setup 4
Connect wires 4
Mount into the dashboard 7
4 Basics 8
Switch on or o 8
Use the touch screen 8
Set the date and time 9
Adjust the screen 9
5 Radio 9
Tune in to radio stations 9
6 Play with RDS 10
Turn on RDS 10
Select program type 10
Select alternate frequencies 11
Receive trac announcement 11
Set RDS clock 12
7 USB 12
Play music 12
Play videos 13
8 Navigation system 14
Insert the map data card 14
Navigate your road trip 14
9 Bluetooth 14
Connect your Bluetooth device 14
Enjoy music from your
Bluetooth device 15
Make phone calls 15
Voice Control 16
Answer phone calls 16
Use the Phonebook 16
10 AV-IN 17
11 Additional devices 17
Connect additional devices 17
12 Sound 18
Select the equalizer settings 18
Select the channel settings 18
Select the Bass settings 19
Select the Subwoofer settings 19
Select the crossover settings 19
13 Settings 20
System settings 20
Bluetooth settings 20
System information 20
14 Reset 21
15 Product information 21
16 Troubleshooting 22
General 22
Bluetooth 23
17 Notice 24
Care of the environment 24
Trademark notice 24
Copyright 24
2EN
2 Your car
entertainment
system
What's in the box
Check and identify the contents of the
package:
a
cd
ef
b
g h
a Main unit with Sleeve
b ISO male connector
c Nut
d Screw
e Hexagon head screw
f GPS Antenna
1 Safety
Read and understand all instructions
before you use the device. If damage is
caused by failure to follow instructions,
the warranty does not apply.
• The device is designed for negative
ground (earth) 12 V DC operation
only.
• Risk of car accidents! Never watch
video or operate this system while
driving.
• To ensure safe driving, adjust the
volume to a safe and comfortable
level.
• Improper fuses can cause damage
or re. When you need to change
the fuse, consult a professional.
• Use only the supplied mounting
hardware for a safe and secure
installation.
• To avoid short circuits, do not
expose the device, remote control
or remote control batteries to rain
or water.
• The device shall not be exposed to
dripping or splashing.
• Do not place any sources of danger
on the device (e.g. liquid lled
objects, lighted candles).
• Never insert objects into the
ventilation slots or other openings
on the device.
• Risk of damage to the screen! Never
touch, push, rub or strike the screen
with any object.
• Clean the device with soft, damp
cloth. Never use substances such
as alcohol, chemicals or household
cleaners on the device.
3EN
g Trim Plate
h Printed materials
Overview
Main unit
gf ab cde
a
• Press to switch on.
• Press and hold to switch o.
• Press to mute or unmute.
b +/-
• Press to increase or decrease
the volume.
c / DISP
• Press to display the set clock.
• Press and hold to turn o
display.
d RES
• Press to reset the system.
e MIC
• Microphone
f Touch screen
g
• Press to enter the Home screen.
Home screen
Tap the icons to select functions:
• : Tune to FM/AM radio stations.
• : Play music/videos from the
connected USB storage device.
• : Make/ answer phone calls from
the connected mobile phone.
• : Stream music from the connected
Bluetooth device.
• : Enter GPS navigation system or
exit.
• : Play music/videos from the
external media player that is
connected through audio/video
cables.
• : Enter the settings menu.
• : Enter the DVR operation
function.
Note
•The DVR icon appears only when a DVR
device connects to the DVR interface.
Please check with your distributor to get a
proper DVR for this unit.
4EN
3 Setup
Always follow the instructions in this
chapter in sequence.
These instructions are for a typical
installation. However, if your car has
dierent requirements, make the
adjustment accordingly. If you have
any question regarding installation kits,
consult your local retailer.
Note
•This system is designed for negative
ground (earth) 12V DC operation only.
•Always install this system in the car
dashboard. Other locations can be
dangerous as the rear of the system heats
up during use.
•To avoid short-circuit: before you connect,
make sure that the ignition is o.
•Make sure that you connect the yellow and
red power supply leads after all other leads
are connected.
•Make sure that all loose leads are insulated
with electrical tape.
•Make sure that the leads do not get caught
under screws iron parts that will move (e.g.
seat rail).
•Make sure that all ground (earth) leads are
run to a common ground (earth) point.
•Use only the supplied mounting hardware
for a safe and secure installation.
•Improper fuses can cause damage or re.
When you need to change the fuse, consult
a professional.
•When you connect other devices to this
system, make sure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
•Never connect speaker wires to the metal
body or chassis of the car.
•Never connect speaker wires with stripes to
one another.
Connect wires
Note
•Make sure that all loose leads are insulated
with electrical tape.
•Consult a professional to connect wires as
instructed below.
•Before connection, check the car's wiring
carefully.
1 Connect the ISO male connectors.
ISO male
connectors
Connect to
a Green strip,
black-edged
green strip
Rear left speaker
bWhite strip,
black-edged
white strip
Front left
speaker
c Gray strip, black-
edged gray strip
Front right
speaker
dPurple strip,
black-edged
purple strip
Rear right
speaker
e Red strip Ignition key +12V
DC when ON/
ACC
f Blue strip Motor/electric
antenna relay
control lead
5EN
ISO male
connectors
Connect to
gBlue strip, white
strip
Amplier relay
control lead
h Black strip Ground
i Yellow strip The +12V car
battery which is
energized at all
times
2 Connect other wires if necessary.
Connectors
and sockets on
rear panel
External sockets
or connectors
1 For ISO male
connectors
As indicated
above
2
(White socket)
Rear left speaker
(Red socket)
Rear right
speaker
3
(White socket)
Left audio
output of the
external player
(Red socket)
Right audio
output of the
external player
4
(Yellow socket)
Video output
of the external
player
5CAMERA IN
(Yellow socket)
Video output
socket of an
external camera
6
(Yellow socket)
Video input of
the external
display device
7
(Black
connector)
GPS smart
antenna
8
(White socket)
Front left
speaker
(Red socket)
Front right
speaker
Connectors
and sockets on
rear panel
External sockets
or connectors
9
(Black/ brown
wire)
SWC (Steering
Wheel Control)
10
(Purple wire)
Reverse camera
(B+)
11
(Pink wire)
Parking brake (-)
12
(Black socket)
External
microphone
13
(Black socket)
DVR In
14
(Black socket)
Radio antenna
15
(Black socket)
Subwoofer
16
(Black socket)
USB connector
of the external
USB storage
device
Tip
•The pin arrangement for the ISO
connectors depends on the type of your
vehicle. To avoid damage to the system,
connect properly.
6EN
/5
/5/5
*36$17(11$
b cd
e f gh
i
a
m
n
o
p
j
k
l
Remark: The device supports
DVR Video In function. Contact
the dealer for detailed operation!
7EN
Mount into the
dashboard
Note
•Make sure that wires are correctly
connected before you mount the main unit
into a car.
•If preset radio stations are lost when the
ignition key is turned OFF and then back
ON, reconnect the red leads crosswise to
the yellow ones.
1 If the car does not have an on-
board drive or navigation computer,
disconnect the negative terminal of
the car battery.
• If you disconnect the car battery
in a car that has an on-board
drive or navigation computer, the
computer may lose its memory.
• If the car battery is not
disconnected, to avoid short-
circuit, make sure that bare wires
do not touch each other.
2 Make sure that the car dashboard
opening is within these
measurements:
182 mm
112 mm
5 mm
• Since the unit cannot be used if
the dashboard opening's slant
angle is above 20 degrees, make
sure that the horizontal slant of
the car dashboard opening is
between 0 and 20 degrees.
3 Remove the mounting sleeve with
the supplied disassembly tools.
4 Install the sleeve into the
dashboard and bend the tabs
outward to x the sleeve.
5 Slide the unit into the sleeve until
you hear a “click”.
8EN
6 Attach the trim plate. 4 Basics
Switch on or o
1 Press to switch on.
• For the rst-time use, follow
the onscreen instructions to
complete the setup.
2 To switch o, press and hold
until the screen dims.
Use the touch screen
1 Press to enter the Home screen.
2 Tap the icon or menu item to select
or enter the functional or options
menu.
3 Tap to return to the previous
screen.
9EN
5 Radio
Press to enter the Home screen. Tap
.
Tune in to radio stations
Auto tune
The rst time you tune in to the radio,
start
Auto tune to search for stations.
1 Tap FM or AM to select a band.
FM bands: FM1, FM2, FM3
AM band: AM
2 Tap to start Auto Store.
» For each band, up to 6 stations
are stored as presets.
» The preset stations are listed at
the bottom of the screen.
3 Tap to select a preset station.
Tip
•When you move to a new place (such as a
new city or country), restart auto tune for
better reception.
Manual tune
Use Manual tune to search for a
frequency or station.
Set the date and time
1 On the Home screen, tap >
.
2 In and , tap
, , , to select your options.
Adjust the screen
Adjust the screen brightness
1 On the Home screen, tap >
.
2 In , tap , to select your
options.
Calibrate the touch panel
1 On the Home screen, tap >
.
2 In ,tap to calibrate
the positioning of your taps on the
screen.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Philips Auto-Videosystem Handbücher
Philips
Philips CED1910BT/98 Bedienungsanleitung
Philips
Philips PAC132 Bedienungsanleitung
Philips
Philips CID3290/00 Bedienungsanleitung
Philips
Philips CID2680/51 Bedienungsanleitung
Philips
Philips CED228 Bedienungsanleitung
Philips
Philips CID3695/00 Bedienungsanleitung
Philips
Philips CED1500BT Bedienungsanleitung
Philips
Philips CED1900BT Montage- und Bedienungsanleitung
Philips
Philips CID3692/00 Bedienungsanleitung
Philips
Philips CID3291/00 Bedienungsanleitung
Philips
Philips CID3290/00 Bedienungsanleitung
Philips
Philips CID3292/00 Bedienungsanleitung
Philips
Philips CID3287/93 Bedienungsanleitung
Philips
Philips PAC132 Bedienungsanleitung
Philips
Philips CID3693/00 Bedienungsanleitung
Philips
Philips CID3688/00 Bedienungsanleitung
Philips
Philips CED370/00 Bedienungsanleitung
Philips
Philips CID2280 Bedienungsanleitung
Philips
Philips CID3687/00 Bedienungsanleitung
Philips
Philips CID3688/00 Bedienungsanleitung
