Philips AZ1018/01 Bedienungsanleitung

TAP

OFF

•

POWER

VOLUME

CDMODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

CD Radio Cassette Recorder AZ1018

AZ101801 19-12-2000 18:50 Pagina 1

EnglishFrançaisEspañol

∑

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

45321

67 980!@#

AZ101801 19-12-2000 18:50 Pagina 3

English

Top and front panels

1 Power slider:CD,RADIO,TAPE/OFF

– selects source of sound CD, RADIO,

TAPE/OFF, and the power on/ off switch

2 LIFTTO OPEN – opens/ closes the CD

door

3 Display – shows the status of the set

4 CASSETTE RECORDER:

PAUSE ;– pauses recording or playback

STOP•OPEN 9/ – stops the tape;opens

the cassette door

SEARCH 5or 6– fast rewinds / winds

the tape

PLAY 1– starts playback

RECORD 0– starts recording

5 BATT LOW – indicator lights up if

battery power is running low

6 PLAY•PAUSE 2; – starts or pauses CD

playback

7STOP9– stops CD playback;erases a

CD programme

8 SEARCH ∞,§

CD:skips or searches a passage/track

backwards or forward

RADIO – tunes to a radio station (up,down)

9 FM•MW – selects FM/ MW (AM)

waveband

10 PRESET 3,4– selects a preset station

(up,down)

11 CD MODE/ PROGRAM

CD – programmes and reviews

programmed track numbers;

– plays tracks CD/ programme in random

order;

– repeats a track/CD/ programme

RADIO – programmes radio preset stations

12 DBB (Dynamic Bass Boost) –

enhances bass response

13 VOLUME – adjusts volume level

Back Panel

14 Telescopic aerial – to improve FM

reception

15 Voltage selector – (not all versions)

adjust the selector to match the local mains.

Disconnect the mains lead if this selector

has to be reset.

16 AC MAINS – inlet for mains lead

17 Battery door – open to insert 6 x 1.5V

R14/UM2/ C-cell batteries

Power Supply

Whenever convenient,use the power

supply if you want to conserve battery life.

Make sure you remove the plug from the

set and wall socket before inserting

batteries.

Batteries (not included)

1Open the battery compartment and insert

six batteries,type R-14,UM-2 or C-cells,

(preferably alkaline) with the correct

polarity as indicated by the "+" and "–"

symbols inside the compartment.

2Close the compartment door,and make

sure the batteries are ﬁrmly and correctly in

place.The set is now ready to operate.

Controls Power Supply

6 x 1.5V R14/ UM2/ C CELL

AZ101801 19-12-2000 18:50 Pagina 4

➜If BATT LOW lights up,battery power

is running low.The BATT LOW

indicator eventually goes out if the

batteries are too weak.

Batteries contain chemical substances,

so they should be disposed of properly.

Incorrect use of batteries can cause

electrolyte leakage and will corrode the

compartment or cause the batteries to

burst.Therefore:

• Do not mix battery types:e.g. alkaline with

carbon zinc.Only use batteries of the same

type for the set.

• When inserting new batteries,do not try to

mix old batteries with the new ones.

• Remove the batteries if the set is not to be

used for a long time.

UsingAC Power

1 Check if the mains voltage, as shown on

the type plate located on the bottom

of the set,corresponds to your local

mains supply. If it does not,consult your

dealer or service centre.

2 Connect the mains lead to the AC MAINS

inlet and the wall socket.The power supply

is now connected and ready for use.

3 If your set is equipped with a voltage

selector,adjust the selector to match the

local mains.Disconnect the mains lead if this

selector has to be reset.

4 To switch off completely,unplug the mains

lead from the wall socket.

• Unplug the mains lead from the wall socket

to protect your set during heavy

thunderstorms.

The type plate is located on the

bottom of the set.

Switching power on/off:

Save energy

Whether you are using mains or battery

supply, to avoid unnecessary energy

consumption always adjust the POWER

slider to TAPE/OFF and check if the

cassette keys are released.

General operation

1 To select your sound source adjust the

POWER slider to CD,RADIO or

TAPE/OFF.

2 Adjust the sound with the VOLUME and

DBB (Dynamic Bass Boost) controls.

3To switch off the set,adjust the POWER

slider to TAPE/OFF position and check

the cassette keys are released.

Note:When the set is switched off the tuner

presets will be retained in the set’s memory.

Power Supply

English

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

AZ101801 19-12-2000 18:50 Pagina 5

Radio reception

1 Adjust the POWER slider to RADIO.

➜Display: shows tu brieﬂy.The radio

frequency is then shown.

2 Press FM•MW once or more to select the

desired waveband.

➜Display: shows your waveband

3 Press and hold down SEARCH ∞or §

brieﬂy to tune to a radio station. Release

when the frequency in the display starts to

change.

➜The radio automatically tunes to a radio

station of sufﬁcient reception. Display

shows Srch during automatic tuning.

• To tune to a weak station, press SEARCH

∞or §brieﬂy and repeatedly until you

have found optimal reception.

To improve reception

– For FM, pull out the telescopic aerial. Incline

and turn the aerial. Reduce its length if the

signal is too strong (very close to a

transmitter).

– For MW (AM) the set is provided with a

built-in aerial so the telescopic aerial is not

needed. Direct the aerial by turning the whole

set.

4To switch off the radio, adjust the POWER

slider to TAPE/OFF position and check

the cassette keys are released.

Programming radio stations

You can store up to a total of 30 radio

stations in the memory.

1 Tune to your desired station (see Radio

Reception).

2 Press CD MODE/ PROGRAM to

activate programming.

➜Display: PROGRAM ﬂashes.

3 Press PRESET 3or 4once or more to

allocate a number from 1 to 30 to this

station.

4 Press CD MODE/ PROGRAM again to

conﬁrm the setting.

➜Display: PROGRAM disappears, the preset

number and the frequency of the preset

station are shown.

5 Repeat the above four steps to store other

stations.

• You can erase a preset station by storing

another frequency in its place.

Changing tuning grid

(some versions only)

see APPENDIX, page 49

Tuning to preset stations

Press PRESET 3or 4until the desired

preset station is shown.

Radio

English

TAP

OFF

•

POWER

VOLUME

CDMODE

PROGRAM

PRESET

PLA

Y-

PAUSE

STOP

FM•MW

BATT

LOW

TAP

OFF

•

POWER

VOLUME

CDMODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

CD Player

Display indication

–Cd OPEN:CD door open

–d1SC:when reading CDcontents

–In stop mode:total track number and

total playback time

–During CD playback:elapsed

playback time of current track and

current track number

–Pause:elapsed playback time freezes

and ﬂashes

–SHUFFLE/ REPEAT modes:when the

respective mode is activated

–PROGRAM:when CD programme active;

Progalso appears brieﬂy when you

store a track

–no SEL:programme activated but no

tracks selected

–FULL: programme memory full

–no Prog:programme cancelled

–Cd Err,no d1SC or nF d1SC:

error in CD operation /no disc/ or a

CD-R(W) is blank or the disc is not

ﬁnalized (seeTroubleshooting)

Playing a CD

This CD-player can play all kinds of Audio

Discs such as CD-Recordables and CD-

Rewritables.Do not try to play a CD-ROM,

CDi,VCD,DVD or computer CD.

1Adjust the POWER slider to CD.

➜Display:shows Cd brieﬂy.

2To open the CD door,lift the CD door at

the edge marked LIFTTO OPEN.

3Insert a CD or CD-R(W) with the printed

side facing up and press the CD door gently

close.

4Press PLAY•PAUSE 2; on the set to

start playback.

5To pause playback press PLAY•PAUSE

2;.To resume,press PLAY•PAUSE 2;

again.

➜The elapsed playback time freezes and

ﬂashes.

6To stop CD playback,press STOP 9.

7To switch off the set,adjust the POWER

slider to TAPE/OFF position and check

the cassette keys are released.

Note:CD play will also stop when:

– you open the CD compartment;

– you select RADIO or TAPE sound

source;

– the CD has reached to the end.

CD-Player

English

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

AZ101801 19-12-2000 18:50 Pagina 7

Selecting a different track

During playback you can use the

SEARCH buttons to select a particular

track.

• If you have selected a track number in the

stop or pause position,press

PLAY•PAUSE 2; to start playback.

• Press SEARCH §once brieﬂy for the

next track,or press repeatedly until the

desired track number appears in the display.

• Press SEARCH ∞once brieﬂy to return

to the beginning of a current track.

• Press SEARCH ∞more than once brieﬂy

for a previous track.

Finding a passage within a track

1During playback,press and hold down

SEARCH ∞or §.

• The CD is played at high speed and low

volume.

2When you recognize the passage you want

release the SEARCH button.

➜Normal playback resumes.

Note:During a CDprogramme or when

SHUFFLE/REPEAT is active,searching is only

possible within a track.

Different play modes

CD MODE/ PROGRAM allows you to

select various play modes.The modes can

be selected or changed during playback of

an entire CD/ CD programme in the

following sequence:

SHUFFLE – all tracks are played in

random order

SHUFFLE REPEATALL – repeats the

entire CD in random order

REPEAT – plays the current track

continuously

REPEATALL – plays the entire CD

continuously

1During playback,select your play mode by

pressing CD MODE/ PROGRAM once

or more until the desired play mode is

shown.

• You can use SEARCH ∞or §to skip

tracks during the SHUFFLE/ REPEAT modes.

• The SHUFFLE/ REPEAT play options can be

combined and used with a programme:e.g.

SHUFFLE/ REPEAT ALL repeats the entire

CD programme in random order.

2To return to normal playback press CD

MODE/ PROGRAM until the SHUFFLE/

REPEAT modes are no longer shown.

• You can also press STOP 9to quit the

play mode.

CD-Player

English

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

AZ101801 19-12-2000 18:50 Pagina 8

Programming track numbers

You may store up to 20 tracks in the

desired sequence.If you like,store any track

more than once.

1In the STOP mode,press SEARCH ∞or

§for your desired track.

2When your chosen track number appears,

press CD MODE/ PROGRAM once to

store the track.

➜The display shows PROGRAM and

'Prog' brieﬂy followed by your selected

track number.

➜If you attempt to programme without

ﬁrst selecting a track number,no SEL

is shown.

3Repeat steps 1 to 2 to select and store all

desired tracks in this way.

➜FULL is displayed if you attempt to

programme more than 20 tracks.

4To play your programme,press

PLAY•PAUSE 2;.

Reviewing your programme

• In the STOP mode,press and hold down

CD MODE/ PROGRAM for more than

one second.

➜The display shows all your stored track

numbers in sequence.

Erasing a programme

You can erase the contents of the memory

by:

– opening the CD door;

– selecting RADIO or TAPE source;

– pressing STOP 9(twice during playback

or in the stop position.)

➜Display:shows 'no Prog' brieﬂy when

the programme is cancelled.

CD-Player

English

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

AZ101801 19-12-2000 18:50 Pagina 9

CASSETTE RECORDER

Cassette playback

1Adjust the POWER slider to TAPE/OFF.

2Press STOP•OPEN 9/ to open the

cassette door and insert a recorded

cassette.

3Close the cassette door.

4Press PLAY 1to start playback.

➜Display:shows tAPE throughout tape

operation.

5To pause playback press PAUSE ;.To

resume,press the key again.

6By pressing 5or 6,fast winding of the

tape is possible in both directions.To stop

fast winding,press STOP•OPEN 9/.

7To stop the tape,press STOP•OPEN 9/.

• The keys are automatically released at the

end of the tape,the tAPE indication goes

out and the set is switched off,except if

PAUSE ;has been activated.

General information on

recording

• Recording is permissible insofar as copyright

or other rights of third parties are not

infringed.

• This deck is not suited for recording on

CHROME (IEC II) or METAL (IEC IV) type

cassettes.For recording, use only NORMAL

type cassettes (IEC type I) on which the

tabs have not been broken.

•The best recording level is set automatically.

Altering the VOLUME and DBB controls

will not affect the recording in progress.

• At the very beginning and end of the tape,

no recording will take place during the

7 seconds when the leader tape passes the

recorder heads.

• To protect a tape from accidental erasure,

have the tape in front of you and break out

the left tab.Recording on this side is no

longer possible.To record over this side

again,cover the tabs with a piece of

adhesive tape.

Cassette Recorder Recording

English

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

AZ101801 19-12-2000 18:50 Pagina 10

English

Synchro Start CD recording

1Select CD source.

2Insert a CD and if desired, programme

track numbers.

3Press STOP•OPEN 9/ to open the

cassette door.Insert a blank tape.

4Close the cassette door.

5Press RECORD 0to start recording.

• Playing of the CD programme starts

automatically from the beginning of the

programme. It is not necessary to start the

CD player separately.

6For brief interruptions press PAUSE ;.To

resume recording,press PAUSE ;again.

7To stop recording,press STOP•OPEN 9/.

Selecting and recording a particular

passage

• During CD playback,press and hold down

the SEARCH buttons ∞or §on the set

to ﬁnd your passage.

• Press PLAY•PAUSE 2; to put the CD

player on pause at the selected passage.

➜Recording will begin from this exact

point in the track when you press

RECORD 0.

Recording from the Radio

1Select RADIO source and your waveband.

2Tune to the desired radio station (see

Radio reception).

3Press STOP•OPEN 9/ to open the

cassette door.Insert a blank tape.

4Close the cassette door.

5Press RECORD 0to start recording.

6For brief interruptions, press PAUSE ;.To

resume recording,press PAUSE ;again.

7To stop recording,

press STOP•OPEN 9/.

Precautions &

General Maintenance

• Place the set on a hard and ﬂat surface so

that the system does not tilt.

• Do not expose the set,batteries,CDs or

cassettes to humidity,rain, sand or excessive

heat caused by heating equipment or direct

sunlight.

• Do not cover the set.Adequate ventilation

with a minimum gap of 6 inches between

the ventilation holes and surrounding

surfaces is necessary to prevent heat build-

up.

• The mechanical parts of the set contain

self-lubricating bearings and must not be

oiled or lubricated.

• To clean the set,use a soft,slightly

dampened chamois leather.Do not use any

cleaning agents containing alcohol,

ammonia,benzene or abrasives as these

may harm the housing.

Recording Maintenance

TAP

OFF

•

POWER

VOLUME

CD MODE

PROGRAM

PRESET

PLAY-

PAUSE

STOP

FM•MW

BATT

LOW

AZ101801 19-12-2000 18:50 Pagina 11

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips CD-Player Handbücher

Philips

Philips AZ 1000 Systemhandbuch

Philips

Philips AZ7271 - Cd Personal Bedienungsanleitung

Philips

Philips AZ1515/05 Bedienungsanleitung

Philips

Philips Expanium EXP 301 Bedienungsanleitung

Philips

Philips AZ2025/17 Bedienungsanleitung

Philips

Philips AZ1833 Betriebsanleitung

Philips

Philips FW 358C Bedienungsanleitung

Philips

Philips AZ7462/05 Bedienungsanleitung

Philips

Philips AZ215 Bedienungsanleitung

Philips

Philips EXP2540 Bedienungsanleitung

Philips

Philips AZ 7368 Bedienungsanleitung

Philips

Philips AZ7383 - Cd Personal Kurzanleitung

Philips

Philips AZ6806/00 Bedienungsanleitung

Philips

Philips AZ1032/05 Betriebsanleitung

Philips

Philips AZ6837/00 Bedienungsanleitung

Philips

Philips CD 610 Bedienungsanleitung

Philips

Philips Magnavox AZ 7384 Bedienungsanleitung

Philips

Philips AX5301 Bedienungsanleitung

Philips

Philips AZ329/98 Bedienungsanleitung

Philips

Philips AZ6831 - Cd Portable Bedienungsanleitung

Philips

Philips AZ9201/00 Bedienungsanleitung

Philips

Philips AZ7881 Bedienungsanleitung

Philips

Philips AZ2605 Bedienungsanleitung

Philips

Philips AZT3202 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung

Optimus

Optimus CD-8250 Bedienungsanleitung

Audiovox

Audiovox CE101A - annexe 1 Bedienungsanleitung