Philips AZ1021 Bedienungsanleitung

CD Soundmachine

www.philips.com/welcome

User Manual

AZ1021

AZ1021C

AZ1021N

AZ1021_79_CCR 2007.9.19 16:58 Page 1

AZ1021_79_CCR 2007.9.19 16:58 Page 2

6 x R14 • UM-2 • C-CELLS

AZ1021_79_CCR 2007.9.19 16:58 Page 3

PROG

REP

SHUF

AZ1021_79_CCR 2007.9.19 16:58 Page 4

Supplied Accessories

– Australian power cord

– VDE power cord

Top/front panels (See 1)

VOLUME

–

adjusts volume level.

Source selector: CD,TUNER, OFF

–

selects CD or radio source of sound

–

power off switch

3Display

–

shows the CD functions

2 ;

–

starts or pauses CD playback

§ ∞

–

selects the next/previous track

– searches forward/backward (press and hold

the button) within the current track

REPEAT

–

repeats a track/

CD program/entire CD.

5PROG – programs tracks and reviews the

program

6LIFT TO OPEN – opens/closes the CD

door.

7TUNING

– tunes to radio stations

8SHUFFLE – plays all tracks in random order

BAND

–

selects waveband

STOP –

stops CD playback;

–

erases a CD program

Back/bottom panel (See 2

and 3)

!Telescopic antenna - improves FM

reception.

@AC MAINS~ - inlet for power cord.

DBB

–

turns the bass enhancement on/off.

$;;– 3.5 mm stereo headphone socket

Helpful hints:

The speaker is muted when you connect head-

phones to the set.

Battery door –open to insert 6 x 1.5V

R-14/ UM-2/ C-cells

CAUTION

- Visible and invisible laser radiation.

If the cover is open, do not look at

the beam.

- High voltage! Do not open.You run

the risk of getting an electric shock.

The machine does not contain any

user-serviceable parts.

- Modification of the product could

result in hazardous radiation of

EMC or other unsafe operation.

Power Supply

Whenever conßvenient, use the power supply

cord if you want to conserve battery life.

Make sure you remove the plug from the set

and wall outlet before inserting batteries.

Batteries (not included)

1 Open the battery door and insert 6 batteries,

type R-14,UM-2 or C-cells, (preferably

alkaline) with the correct polarity as indicated

by the "+" and "–" symbols inside the com-

partment. (See 2)

2 Replace the battery door, making sure the bat-

teries are firmly and correctly in place.The set is

now ready to operate.

Batteries contain chemical substances, so

they should be disposed of properly.

• Incorrect use of batteries can cause electrolyte

leakage and corrode the compartment or cause

the batteries to burst:

• Do not mix battery types: e.g. alkaline with car-

bon zinc. Only use batteries of the same type

for the set.

• When inserting new batteries, do not try to mix

old batteries with the new ones.

• Remove the batteries if the set is not to be used

for a long time.

English Controls/Power Supply

AZ1021_79_CCR 2007.9.19 16:58 Page 5

Power Supply General Operation / Tuner

Using AC power

WARNING: Always ensure that you have

completely switched off the set, before

you change or disconnect power supply.

1 Check if the power voltage, as shown on the

type plate located on the bottom of the set,

corresponds to your local power supply. If it

does not, consult your dealer or service cen-

ter.

2 Connect the power cord to the AC

MAINS~ inlet and the wall socket.The set is

now connected and ready for use.

3 To switch the set off completely, withdraw the

power cord from the wall socket.

4Install the unit near the AC outlet and where

the AC power plug can be easily reached.

•Disconnect the power cord from the wall

socket to protect your set during heavy thun-

derstorms. Children could seriously injure

themselves as the free end of the cable may

still be live if only the connector is removed

from the MAINS socket at the back of the

unit.

The type plate is located on the

bottom of the set.

Helpful hints:

–To avoid unnecessary energy consumption,

always adjust the

Source selector

OFF

after using the set.

General operation

Switching on and off and selecting the

function

1 To select your sound source, adjust the

Source selector to: CD, or

TUNER

2To switch off the set, adjust the Source

selector to

OFF

position.

Adjusting volume and sound

1 Adjust volume by using the VOLUME con-

trol.

2Adjust sound effect by using the DBB con-

trol.

Radio reception

1 Adjust the Source selector to TUNER.

2 Adjust BAND to select your desired wave-

band, MW or FM.

3 Tu r n TUNING to tune to a station.

Helpful hints:

To improve radio reception

• For FM,extend, incline and turn the telescop-

ic antenna for best reception and reduce its

length if the signal is too strong.

• For MW,the set uses a built-in antenna.

Direct this antenna for best reception by

turning the whole set.

AZ1021_79_CCR 2007.9.19 16:58 Page 6

Playing a CD

•This CD player plays Audio Discs including

CD-Recordables (CD-R) and CD-Rewritables

(CD-RW).

•MP3, CD-ROM, CD-I, CDV,VCD, DVD or

computer CDs are not possible for playback.

IMPORTANT!

CDs encoded with copyright protection

technologies by some record companies may

be unplayable by this product.

1Adjust the Source selector to CD.

2Open the CD door, and insert a CD with

the printed side facing up, then press the CD

door gently to close.

➜Display shows --,and later the total

number of tracks. (See 3)

3Press

to start playback.

4To pause playback, press

➜

Display: 2flashes.

(See 4)

5To resume, press

again.

6To stop CD playback, press

Helpful hints:

CD play also stops when:

–you open the CD door;

–you select

TUNER

OFF

sound source;

–the CD has reached the end.

Selecting a different track

•Press

∞/ §

once or repeatedly until the

desired track number appears in the display.

•In the pause/stop position, press 2; to start

playback.

Finding a passage within a

track

1During playback, press and hold ∞or §.

➜ The CD is played at high speed and with

reduced volume.

2When you recognize the passage you want,

release ∞or §to resume normal playback.

Helpful hints:

– When your searching reaches the end of the

last track, the CD goes to stop mode.

CD Player

AZ1021_79_CCR 2007.9.19 16:58 Page 7

Programming track num-

bers

You may store up to 20 tracks in the desired

sequence. If you like, store any track more

than once.

1In the stop position, press PROG to activate

programming.

➜Display: PROG and 00 flash. (See 5)

2Press

∞

to select your desired track

number.

3Press PROG to store the desired track

number.

➜Display: PROG and 00 flash for you to

program the next track.

4Repeat steps 2 to 3to select and store all

desired tracks in this way.

➜If you attempt to store more than 20

tracks, no track can be selected and the

display shows ----.

5To play your program, press

;

Helpful hints :

– When playback of your program comes

to the stop position, your set returns to

normal playback.To re-enter program

mode, press PROG in the stop position.

Reviewing the program

In the stop position, press PROG repeatedly

to see your stored tracks.

Erasing a program

You can erase the contents of the memory

by:

– in the stop position, press PROG to enter

program mode, and then press

– selecting

TUNER

OFF

;

– opening the CD door;

Different play modes:

REPEAT. and SHUFFLE

(See 6,7)

REPEAT

You can play the current track or the whole

disc repeatedly, and combine REPEAT

modes with PROG (PROGRAM).

REP – plays the current track continuously.

REP ALL –repeats the entire CD/program

1To select play mode, press REPEAT once or

more.

➜ The display shows REP icon or REP ALL

icon.

2Press 2; to start playback in the stop/pause

position.

3To return to normal playback, press REPEAT

repeatedly until the modes are no longer dis-

played.

– You can also press 9to cancel your play

mode.

SHUFFLE

Yo u can play all the tracks in random order.

1In the stop position, press SHUFFLE to

switch on shuffle play.

➜ Display shows SHUF icon.

2To switch off shuffle play, press 9.

Helpful hints:

–During the shuffle play, when REP function is

selected, the set plays the current shuffled track

repeatedly, or when the REP ALL function is

selected, it repeats the shuffle play of the entire

CD.

CD Player

AZ1021_79_CCR 2007.9.19 16:58 Page 8

CD player and CD handling

•If the CD player cannot read CDs correctly,

use a cleaning CD to clean the lens before

taking the set to repair.

•Never touch the lens of the CD player!

•Sudden changes in the surrounding

temperature can cause condensation on the

lens of your CD player. Playing a CD is then

not possible. Do not attempt to clean the

lens but leave the set in a warm environment

until the moisture evaporates.

•Always close the CD door to avoid dust on

the lens.

•To clean the CD, wipe in a straight line from

the center towards the edge using a soft,

lint-free cloth. Do not use cleaning agents as

they may damage the disc.

•Never write on a CD or attach any stickers

to it.

Safety information

•Place the set on a flat, hard and stable surface

so that the system does not tilt.

•Where the MAINS plug or an appliance cou-

pler is used as the disconnect device, the dis-

connet device shall remain readily operable.

•Do not expose the set, batteries, CDs to

humidity, rain, sand or excessive heat caused

by heating equipment or direct sunlight.

•The apparatus shall not be exposed to drip-

ping or splashing.

•Adequate ventilation with a minimum gap of

15cm (6 inches) between the ventilation

holes and surrounding surfaces is necessary

to prevent heat build-up.

•Do not cover the ventilation openings with

items such as newspapers, table-cloths, cur-

tains, etc.

•No objects filled with liquids, such as vases,

shall be placed on the apparatus.

•No naked flame sources, such as lighted can-

dles, should be placed on the apparatus.

•The mechanical parts of the set contain self-

lubricating bearings and must not be oiled or

lubricated.

•To clean the set, use a dry cloth. Do not use

any cleaning agents containing alcohol, ammo-

nia, benzene or abrasives as these may harm

the housing.

Maintenance & Safety (See 8)

AZ1021_79_CCR 2007.9.19 16:58 Page 9

Problem

–Possible cause

•Remedy

No sound /power

–Volume not adjusted

•Adjust the VOLUME

–Power cord not securely connected

•Connect the AC power cord properly

–Batteries dead/ incorrectly inserted

•Insert (fresh) batteries correctly

–Headphones connected to the set

•

Disconnect headphones.

–CD contains non-audio files

•Press

∞,§

once or more to skip to a CD audio

track, instead of the data file.

Display does not function properly / No

reaction to operation of any of the

controls

–Electrostatic discharge

•Switch off and unplug the set. Reconnect after a

few seconds

--,Er

01 indication

–No CD inserted

•

Insert a CD

–CD badly scratched or dirty

•

Replace/clean CD, see Maintenance

–Laser lens steamed up

•Wait until lens has cleared

–CD-R/CD-RW is blank or not finalized

•

Use a finalized CD-R/CD-RW or suitable CD

Audio disc only

Note:

Make sure the CD is not encoded with copy-

right protection technologies, as some do not

conform to the Compact Disc standard.

The CD skips tracks

–CD damaged or dirty

•Replace or clean CD

–Program/shuffle is active

•Exit program/shuffle mode

Note: A CD badly scratch or dirty may result in

improper operation.

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: Do not open the set as there is a risk of electric shock. Under no

circumstances should you try to repair the set yourself, as this will

invalidate the guarantee.

AZ1021_79_CCR 2007.9.19 16:58 Page 10

Andere Handbücher für AZ1021

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips CD-Player Handbücher

Philips

Philips Expanium EXP513 Bedienungsanleitung

Philips

Philips CD 723 Bedienungsanleitung

Philips

Philips FW26/25 Bedienungsanleitung

Philips

Philips EXP2461 Expanium Bedienungsanleitung

Philips

Philips AZ1837/55 Bedienungsanleitung

Philips

Philips AX5116 Bedienungsanleitung

Philips

Philips AZ5738 Bedienungsanleitung

Philips

Philips AZ1570 Bedienungsanleitung

Philips

Philips AZ1133 Bedienungsanleitung

Philips

Philips AZ 1009 Bedienungsanleitung

Philips

Philips AZ1307 - Portable Radio Cass Rec Bedienungsanleitung

Philips

Philips AZ1833/12 Betriebsanleitung

Philips

Philips AZ 7000 Bedienungsanleitung

Philips

Philips CD 710 Bedienungsanleitung

Philips

Philips CDC 925 Bedienungsanleitung

Philips

Philips AZ7881 Bedienungsanleitung

Philips

Philips AZ7337/17 Bedienungsanleitung

Philips

Philips AZ7271 - Cd Personal Bedienungsanleitung

Philips

Philips AZ1518 Bedienungsanleitung

Philips

Philips AZ6836 - Cd Portable Bedienungsanleitung

Philips

Philips Jogproof AX3312 Bedienungsanleitung

Philips

Philips CD 711 Bedienungsanleitung

Philips

Philips MG9218 Bedienungsanleitung

Philips

Philips AX5015 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung

Optimus

Optimus CD-8250 Bedienungsanleitung

Audiovox

Audiovox CE101A - annexe 1 Bedienungsanleitung