Philips AZ1050/00 Bedienungsanleitung

CONTROLS

English

BASIC FUNCTIONS

1POWER:

CD, TAPE, BAND

....selects the sound source

2DBB.......................enhances the bass

3VOLUME ...............adjusts the volume level

4p...........................3.5mm headphone socket

(back of the set)

Note: Connecting the headphones will switch

off the speakers.

5CASSETTE RECORDER

PAUSE ;...............interrupts recording or

playback

OPEN·STOP /9..stops the tape and opens

the cassette compartment

SEARCH 6...........rewinds the tape

SEARCH 5...........fast forwards the tape

PLAY 1.................starts playback

RECORD 0...........starts recording

RADIO

6TUNING ................tunes to radio stations

1BAND: FM, MW...selects the wave band

7CD PLAYER

OPEN

•

CLOSE .....opens the CD

compartment

9...........................stops CD play and erases

the program

2; ........................starts and interrupts CD

play

§.........................skips and searches

forward

∞.........................skips and searches

backward

CD MODE..............selects the different CD

playing modes and

programs tracks

8Display

AZ 1050 /00 page 4

BASS REFLEX

PLAY RECORD

OPEN¥STOP

PAUSE

STOP

PLAY¥

PAUSE

CD MODE

AZ1050

PROGRAM

CD RADIO CASSETTE RECORDED

DIGITAL AUDIO

COMPACT

681 2 73

AZ1050/00 eng 8/12/00 16:48 Page 4

POWER SUPPLY

Open the battery compartment of the set and insert 6 batteries,

type R20, UM-1 or D-cells (preferably alkaline).

Remove batteries if they are flat or if the set is not going to be

used for a long time.

Batteries contain chemical substances, so they should be

disposed of properly.

1Check whether the mains voltage as shown on the type plate

corresponds to your local mains voltage. If it does not, consult

your dealer or service organisation.

The type plate is located

on the bottom of the set.

2If the set is equipped with a VOLTAGE selector A, set this

selector to the local mains voltage.

3Connect the mains cable to the AC MAINS socket and the wall

socket. This switches on the mains supply.

The mains cable is

inside the battery compartment.

The battery supply will be switched off when the set is connected

to the mains. To change over to battery supply, pull out the plug

from the unit’s AC MAINS socket.

To disconnect the set from the mains completely, remove the

mains plug from the wall socket.

For users in the U.K.: please follow the instructions on page 2.

Mains

Batteries (optional)

English

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the

packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer)

and polyethylene (bags, protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company.

Please observe the local regulations regarding the disposal of packing materials, exhausted

batteries and old equipment.

AZ 1050 /00 page 5

AZ1050/00 eng 8/12/00 16:48 Page 5

English

Set the POWER slider to the desired sound source:

CD, TAPE, or BAND (for radio).

The set is switched off when the POWER slider is set to OOFFFF/TAPE

and the keys of the tape deck are released.

Note: If you use batteries, switch the set off after use. This will

avoid unnecessary power consumption.

Adjust the volume using the VOLUME control.

Increase and decrease the bass level by pressing DBB.

The bass level can also be emphasised if you place the set against

wall or shelf. Do not cover any vents; leave sufficient room around

the unit for ventilation.

1Set the POWER slider to FM or MW to select the desired

wave band.

2Tune to the desired radio station by using the TUNING wheel.

Improving RADIO reception

For FM stations, pull out the telescopic antenna. To improve the

signal, incline and turn the antenna. Reduce its length if the signal

is too strong (very close to a transmitter).

For MW stations, direct the built-in antenna by turning the whole

set. The telescopic antenna is not needed.

AM/FM

103

105

107

BASSREFLEXSPEAKERSYSTEM

REMOTECONTROL

PLAY

RECORD

PAUSE

STOP

OPEN•CLOSE

CDRADIOCLASSETTERECORDING

AZ1055

SHUFFLE

PROGRAM

AM/FM

103

105

107

BASSREFLEXSPEAKERSYSTEM

REMOTECONTROL

PLAY

RECORD

PAUSE

STOP

OPEN•CLOSE

CDRADIOCLASSETTERECORDING

AZ1055

SHUFFLE

PROGRAM

AZ1050

CD RADIO CASSETTE RECORDER

FM AM

170

130

100

kHz

x 10

MHz

100

104

108

•

Radio – tuning to radio stations

VOLUME

CD RADIO CASSETTE

AZ1050

DYNAMIC

BASS

BOOST

Adjusting volume and sound

TAPE

CD FM

CD RADIO CASSETTE

AZ1050

DYNAMIC

BASS

BOOST

POWER

OFF

Switching the set on and off

BASIC FUNCTIONS RADIO

AZ 1050 /00 page 6

AZ1050/00 eng 8/12/00 16:48 Page 6

CD PLAYER

English

1Set the POWER slider to CD.

2Press OPEN

•

CLOSE to open the CD compartment.

3Insert an audio CD (printed side up) and close the CD

compartment.

™The CD player starts and scans the contents list of the CD.

Then, the CD player stops. Display indication: the total

number of tracks.

4Press the 2; button to start CD play.

™Display indication: the current track number.

5Press the 9button to stop CD play.

™Display indication: the total number of tracks.

You can interrupt CD play by pressing 2;. Continue CD play by

pressing the button again.

™Display indication: the current track number (flashing).

Note: CD play will also stop if:

– you open the CD compartment,

– the end of the CD is reached, or

– you move the

POWER

slider.

If you make a mistake when operating the CD player, or if the

CD player cannot read the CD, the display shows Eor no. (See

”TROUBLESHOOTING”.)

If you press 2; and there is no CD inserted, the display

shows no.

CD RADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

•

Playing a CD

AZ 1050 /00 page 7

AZ1050/00 eng 8/12/00 16:48 Page 7

CD PLAYER

English

Selecting another track

Briefly press the ∞or §button once/several times to skip to the

beginning of the current, previous or subsequent track(s).

During CD play:

CD play continues automatically with the selected track.

When CD play is stopped:

Press 2; to start CD play.

™Display indication: the selected track number.

Searching for a passage during CD play

1Hold down the ∞or §button to find a particular passage in a

forward or backward direction.

™CD play continues at a low volume.

2Release the button when you have reached the desired passage.

Note: In the different CD modes or when playing a program, searching

is only possible within the particular track.

1During CD play press CD MODE repeatedly to cause the display

to show the different playing modes.

™SHUFFLE: All tracks of the CD (or program) are played in

random order.

™SHUFFLE REPEAT ALL: All tracks of the CD (or program) are

played repeatedly in random order.

™REPEAT: The current track is played repeatedly.

™REPEAT ALL: The entire CD (or program) is played repeatedly.

2After 2 seconds of flashing display indication, CD play starts in

the chosen mode.

3To return to normal CD play, press CD MODE until the display

indication disappears.

SHUFFLE

REPEAT

ALL

CDRADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

CD MODE: Shuffle and Repeat

CD RADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

Search backward ∞and forward §

AZ 1050 /00 page 8

AZ1050/00 eng 8/12/00 16:48 Page 8

CD PLAYER

You can select a number of tracks and store these in the memory

in the desired sequence. You can store any track more than once.

A maximum of 20 tracks can be stored in the memory.

1When CD play is stopped, select the desired track with ∞or

§.

2As soon as the number of the desired track is displayed, press

CD MODE to store the track in the memory.

™PROGRAM appears on the display. Plights up briefly, then the

number of the stored track is shown.

3Select and store all desired tracks in this way.

4You can review your settings by pressing and holding CD MODE

for more than 1 second.

™The display shows all stored track numbers in sequence.

If you try to store more than 20 tracks, the display shows F.

Press 2; to play the program.

From the stop position, press 9.

™no lights up briefly, PROGRAM disappears and your program

is erased.

Note: The program will also be erased if you:

– interrupt the power supply,

– open the CD compartment, or

– move the

POWER

slider.

PROGRAM

Erasing the program

PROGRAM

Playing the program

PROGRAM

CD RADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

CD MODE: Programming track numbers

English

AZ 1050 /00 page 9

AZ1050/00 eng 8/12/00 16:48 Page 9

CASSETTE RECORDER

English

1Set the POWER slider to TAPE.

2Press OPEN·STOP /9to open the cassette compartment.

3Insert a recorded cassette with the open side upwards and close

the cassette compartment.

4Press PLAY 1to start playback.

5Press 6or 5to rewind or fast forward the tape.

6To stop the tape press OPEN·STOP /9.

Note: The keys are released at the end of the tape.

Recording is permissible insofar as copyright or other rights of

third parties are not infringed upon.

For recording on this set you should use a cassette of the type

NORMAL (IEC type I). This deck is not suitable for recording on

cassettes of the type CHROME (IEC type II) or METAL (IEC

type IV).

The recording level is set automatically. The controls VOLUME and

DBB do not affect the recording.

At the very beginning and end of the tape, no recording will take

place in the 7 seconds during which the leader tape passes the

recorder heads.

Protecting tapes from accidental erasure

Keep the cassette side to be protected in front of you and snap off

the left tab. Now, recording on this side is no longer possible.

To record again on this side of the cassette, cover the opening with

a piece of adhesive tape.

General information on recording

OPEN•STOP

SEARC

PAUSE

CD RADIO CASSETTE RECORDER

AZ1050

PLA

RECORD

Playing a cassette

AZ 1050 /00 page 10

AZ1050/00 eng 8/12/00 16:48 Page 10

CASSETTE RECORDER

1Set the POWER slider to CD.

2Insert a CD and, if desired, program the track numbers.

3Press OPEN·STOP /9to open the cassette compartment.

4Insert a blank, unprotected, cassette and close the cassette

compartment.

5Press RECORD 0to start recording.

™Playing of the CD or program starts automatically.

6For brief interruptions press PAUSE ;. Press the PAUSE ;key

again to resume recording.

7To stop recording, press OPEN·STOP /9.

Note: the recording can be started from different positions:

– if the CD player is in pause mode, recording will start

from this very position (use

∞

);

– if the CD player is in stop mode, recording will start from

the beginning of the CD or program.

1Tune to the desired radio station (see ”RADIO”).

2Press OPEN·STOP /9to open the cassette compartment.

3Insert a blank, unprotected, cassette and close the cassette

compartment.

4Press RECORD 0to start recording.

5For brief interruptions press PAUSE ;. To resume recording

press the PAUSE ;key again.

6To stop recording, press OPEN·STOP /9.

Recording from the radio

OPEN•STOP

PAUSE

CD RADIO CASSETTE RECORDER

AZ1050

PLAY

RECORD

Recording from the CD player – CD synchro start

English

AZ 1050 /00 page 11

AZ1050/00 eng 8/12/00 16:48 Page 11

GENERAL INFORMATION

English

Do not expose the set, batteries, CDs, or tapes to humidity,

rain, sand, or excessive heat (caused by heating equipment or

direct sunlight).

The mechanical parts of the set contain self-lubricating bearings

and must not be oiled or lubricated!

You can clean the set with a soft, slightly dampened, lint-free cloth.

Do not use any cleaning agents as they may have a corrosive effect.

To ensure proper recording and playback quality, clean parts

A, Band Cafter approximately 50 hours of operation. Use a

cotton swab slightly moistened with alcohol or head-cleaner fluid.

Press PLAY 1and clean the rubber pressure roller A.

Press PAUSE ;and clean the capstan Band the heads C.

Note: Cleaning of the heads

can also be done by playing a

cleaning tape once.

The lens Xof the CD player should never be touched. Always

keep the CD compartment closed to avoid dust on the lens.

The lens may cloud over when the set is suddenly moved from cold

to warm surroundings. Playing a CD is not possible then. Leave the

CD player in a warm environment until the moisture evaporates.

To take the CD out of its box easily, press the centre spindle while

lifting the CD.Always pick up the CD by the edge and put it back

in its box after use.

To clean the CD, wipe it in a straight line from the center toward

the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc!

Never write on a CD or attach a sticker to it.

TOP OPEN

SEARCH PLAY RECORD

PEEDDUBBING

CD player and CD handling

CD RADIO CASSETTE RECORDER

Tape deck maintenance

AM/FM

103

105

107

CDRADIOCLASSETTERECORDING

AZ1055

SHUFFLE

PROGRAM

•

General maintenance

This set complies with the radio interference requirements of the

European Community

AZ 1050 /00 page 12

AZ1050/00 eng 8/12/00 16:48 Page 12

TROUBLESHOOTING

Problem Possible cause Solution

No sound, VOLUME is not adjusted. Adjust volume.

no power Headphones are connected. Disconnect headphones.

Mains cable is not securely connected. Connect mains cable properly.

Batteries are flat. Insert fresh batteries.

Batteries are inserted incorrectly. Insert batteries correctly.

Trying to change over from mains to Remove the mains plug from the

battery supply without removing the plug. unit’s AC MAINS socket.

No reaction to Electrostatic discharge. Disconnect the set from power supply,

operation of any keys reconnect after a few seconds.

Poor radio reception Weak radio signal. Direct the antenna for optimum

reception.

Interference caused by electrical equipment Keep the radio away from electrical

like TVs, computers, engines, etc. equipment.

no or Eindication The CD is badly scratched or dirty. Replace or clean the CD.

No CD is inserted. Insert a CD.

The CD is inserted upside down. Insert CD with label facing up.

The laser lens is steamed up. Wait until the lens has cleared.

The CD skips tracks The CD is damaged or dirty. Replace or clean the CD.

SHUFFLE or PROGRAM is active. Switch off SHUFFLE or PROGRAM.

Poor cassette Dust and dirt on the heads, capstans or Clean heads, capstans, and pressure

sound quality pressure rollers. rollers.

Use of unsuitable cassette types Only use NORMAL type cassettes for

(METAL or CHROME) for recording. recording.

Recording does Cassette tab(s) may be snapped off. Apply a piece of adhesive tape over

not work the opening.

English

WARNING

Under no circumstance should you try to

repair the set yourself as this will

invalidate the guarantee.

If a fault occurs, first check the points listed

below before taking the set for repair.

If you are unable to solve a problem by

following these hints, consult your dealer or

service center.

AZ 1050 /00 page 13

AZ1050/00 eng 8/12/00 16:48 Page 13

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips CD-Player Handbücher

Philips

Philips AX5000 Bedienungsanleitung

Philips

Philips AZ6840 - Cd Portable Bedienungsanleitung

Philips

Philips AZ2535/00C Bedienungsanleitung

Philips

Philips AX1000 Bedienungsanleitung

Philips

Philips AZ1508 Kurzanleitung

Philips

Philips RD1011 Bedienungsanleitung

Philips

Philips AZ9211 Bedienungsanleitung

Philips

Philips CD610 Bedienungsanleitung

Philips

Philips AZ2538 Bedienungsanleitung

Philips

Philips AX2300 Bedienungsanleitung

Philips

Philips AZ2025/17 Bedienungsanleitung

Philips

Philips Jogproof AX7101 Bedienungsanleitung

Philips

Philips AZ 7180 Bedienungsanleitung

Philips

Philips AX3303 Bedienungsanleitung

Philips

Philips EXP201/00 Bedienungsanleitung

Philips

Philips AZ8052 Bedienungsanleitung

Philips

Philips EXP3481/17 Bedienungsanleitung

Philips

Philips Jogproof AX2301 Bedienungsanleitung

Philips

Philips RD5050/18 Bedienungsanleitung

Philips

Philips AX5311 Bedienungsanleitung

Philips

Philips FW 25 Bedienungsanleitung

Philips

Philips AZ6837/00 Bedienungsanleitung

Philips

Philips CD 753 Bedienungsanleitung

Philips

Philips AZ7881 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung

Optimus

Optimus CD-8250 Bedienungsanleitung

Audiovox

Audiovox CE101A - annexe 1 Bedienungsanleitung