Philips AZ1050/19 Bedienungsanleitung

PLAY RECORD

OPEN¥STOP

PAUSE

STOP

PLAY¥

PAUSE

BASS REFLEX

CD MODE

AZ1050

PROGRAM

CD RADIO CASSETTE RECORDED

DIGITAL AUDIO

COMPACT

AZ 1050

CD Radio Cassette Recorder

Toll Free Help Line

Ligne d'assistance en service libre

Linea de ayuda telefónica sin cargo

800-531-0039

AZ1050/17 eng usa 8/1/01 14:47 Page 1

English

AZ 1050 /17 page 6

CONTROLS

BASIC FUNCTIONS

1POWER:

CD, TAPE, BAND

....selects the sound source

2DBB.......................enhances the bass

3VOLUME ...............adjusts the volume level

4p...........................3.5 mm headphone socket

(back of the set)

Note: Connecting the headphones will switch

off the speakers.

5CASSETTE RECORDER

PAUSE ;...............pauses recording or

playback

OPEN·STOP /9..stops the tape and opens

the cassette compartment

SEARCH 6...........rewinds the tape

SEARCH 5...........fast forwards the tape

PLAY 1.................starts playback

RECORD 0...........starts recording

RADIO

6TUNING ................tunes to radio stations

1BAND: FM, AM ....selects the wave band

7CD PLAYER

OPEN

•

CLOSE .....opens the CD

compartment

9...........................stops CD play and erases

the program

2; ........................starts and pauses CD play

§.........................skips and searches

forward

∞.........................skips and searches

backward

CD MODE..............selects the different CD

playing modes and

programs tracks

8Display

BASS REFLEX

PLAY RECORD

OPEN¥STOP

PAUSE

STOP

PLAY¥

PAUSE

CD MODE

AZ1050

PROGRAM

CD RADIO CASSETTE RECORDED

DIGITAL AUDIO

COMPACT

681 2 73

AZ1050/17 eng usa 8/1/01 14:47 Page 6

Open the battery compartment of the set and insert 6 batteries,

type R20, UM-1, or D-cells (preferably alkaline).

Remove batteries if they are dead or if the set is not going to be

used for a long time.

Batteries contain chemical substances, so they should be

disposed of properly.

1Check whether the voltage as shown on the type plate

corresponds to your local voltage. If it does not, consult your

dealer or service organization.

The type plate is located on

the bottom of the set.

2If the set is equipped with a VOLTAGE selector A, set this

selector to the local voltage.

3Connect the AC power cord to the AC MAINS socket and to the

wall socket. This switches on the AC power supply.

The AC

power cord is inside the battery compartment.

The battery supply will be switched off when the set is connected

to the AC power. To change to battery supply, disconnect the AC

power cord from the unit’s AC MAINS socket.

To disconnect the set from the AC power completely, remove the

AC power cord from the wall socket.

AC power supply

Batteries (optional)

English

AZ 1050 /17 page 7

POWER SUPPLY

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

AZ1050/17 eng usa 8/1/01 14:47 Page 7

English

AZ 1050 /17 page 8

Set the POWER control to the desired sound source:

CD, TAPE, or BAND (for radio).

The set is switched off when the POWER control is set to

OOFFFF/TAPE and the keys of the tape deck are released.

Note: If you use batteries, switch the set off after use. This will

avoid unnecessary power consumption.

Adjust the volume using the VOLUME control.

Increase and decrease the bass level by pressing DBB.

The bass level can also be emphasized if you place the set against

a wall or shelf. Do not cover any vents; leave sufficient room

around the unit for ventilation.

1Set the POWER control to FM or AM to select the desired

wave band.

2Tune to the desired radio station by using the TUNING wheel.

Improving RADIO reception

For FM stations, pull out the telescopic antenna. To improve the

signal, incline and turn the antenna. Reduce its length if the signal

is too strong (very close to a transmitter).

For AM stations, direct the internal antenna by turning the whole

set. The telescopic antenna is not needed.

AM/FM

103

105

107

BASSREFLEXSPEAKERSYSTEM

REMOTECONTROL

PLAY

RECORD

PAUSE

STOP

OPEN•CLOSE

CDRADIOCLASSETTERECORDING

AZ1055

SHUFFLE

PROGRAM

AM/FM

103

105

107

BASSREFLEXSPEAKERSYSTEM

REMOTECONTROL

PLAY

RECORD

PAUSE

STOP

OPEN•CLOSE

CDRADIOCLASSETTERECORDING

AZ1055

SHUFFLE

PROGRAM

AZ1050

CD RADIO CASSETTE RECORDER

FM AM

170

130

100

kHz

x 10

MHz

100

104

108

•

Radio – tuning to radio stations

VOLUME

CD RADIO CASSETT

AZ1050

DYNAMIC

BASS

BOOST

Adjusting volume and sound

TAPE

CD FM

CD RADIO CASSETTE R

AZ1050

DYNAMIC

BASS

BOOST

POWER

OFF

Switching the set on and off

BASIC FUNCTIONS RADIO

AZ1050/17 eng usa 8/1/01 14:47 Page 8

English

AZ 1050 /17 page 9

CD PLAYER

1Set the POWER control to CD.

2Press OPEN

•

CLOSE to open the CD compartment.

3Insert an audio CD (printed side up) and close the CD

compartment.

™The CD player starts and scans the contents list of the CD.

Then, the CD player stops. Display indication: the total

number of tracks.

4Press the 2; button to start CD play.

™Display indication: the current track number.

5Press the 9button to stop CD play.

™Display indication: the total number of tracks.

You can pause CD play by pressing 2;. Continue CD play by

pressing the button again.

™Display indication: the current track number (flashing).

Note: CD play will also stop if:

– you open the CD compartment,

– the end of the CD is reached, or

– you move the

POWER

control.

If you make a mistake when operating the CD player, or if the

CD player cannot read the CD, the display shows Eor no. (See

”TROUBLESHOOTING”.)

If you press 2; and there is no CD inserted, the display

shows no.

CD RADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

•

Playing a CD

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the

packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer)

and polyethylene (bags, protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company.

Please observe the local regulations regarding the disposal of packing materials, dead batteries

and old equipment.

AZ1050/17 eng usa 8/1/01 14:47 Page 9

Selecting another track

Briefly press the ∞or §button once/several times to skip to the

beginning of the current, previous or subsequent track(s).

During CD play:

CD play continues automatically with the selected track.

When CD playback is stopped:

Press 2; to start CD play.

™Display indication: the selected track number.

Searching for a passage during CD play

1Hold down the ∞or §button to find a particular passage in a

forward or backward direction.

™CD play continues at a low volume.

2Release the button when you have reached the desired passage.

Note: In the different CD modes or when playing a program, searching

is only possible within the particular track.

1During CD play press CD MODE repeatedly to cause the display

to show the different playing modes.

™SHUFFLE: All tracks of the CD (or program) are played in

random order.

™SHUFFLE REPEAT ALL: All tracks of the CD (or program) are

played repeatedly in random order.

™REPEAT: The current track is played repeatedly.

™REPEAT ALL: The entire CD (or program) is played repeatedly.

2After 2 seconds of flashing display indication, CD play starts in

the chosen mode.

3To return to normal CD play, press CD MODE until the display

indication disappears.

SHUFFLE

REPEAT

ALL

CDRADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

CD MODE: Shuffle and Repeat

CD RADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

Search backward ∞and forward §

English

AZ 1050 /17 page 10

CD PLAYER

AZ1050/17 eng usa 8/1/01 14:47 Page 10

You can select a number of tracks and store these in the memory

in the desired sequence. You can store any track more than once.

A maximum of 20 tracks can be stored in the memory.

1When CD play is stopped, select the desired track with ∞or

§.

2As soon as the number of the desired track is displayed, press

CD MODE to store the track in the memory.

™PROGRAM appears on the display. Plights up briefly, then the

number of the stored track is shown.

3Select and store all desired tracks in this way.

4You can review your settings by pressing and holding CD MODE

for more than 1 second.

™The display shows all stored track numbers in sequence.

If you try to store more than 20 tracks, the display shows F.

Press 2; to play the program.

When playback is stopped, press 9.

™no lights up briefly, PROGRAM disappears and your program

is erased.

Note: The program will also be erased if you:

– interrupt the power supply,

– open the CD compartment, or

– move the

POWER

control.

PROGRAM

Erasing the program

PROGRAM

Playing the program

PROGRAM

CD RADIO CLASSETTE RECORDING

AZ1050

SHUFFLE

PROGRAM

PLAY

RECORD

PAUSE

OPEN¥STOP

STOP

PLAY ¥

PAUSE

CD MODE

CD MODE: Programming track numbers

English

AZ 1050 /17 page 11

CD PLAYER

AZ1050/17 eng usa 8/1/01 14:47 Page 11

1Set the POWER control to TAPE.

2Press OPEN·STOP /9to open the cassette compartment.

3Insert a recorded cassette with the open side upwards and close

the cassette compartment.

4Press PLAY 1to start playback.

5Press 6or 5to rewind or fast forward the tape.

6To stop the tape press OPEN·STOP /9.

Note: The keys are released at the end of the tape.

Recording is permissible insofar as copyright or other rights of

third parties are not infringed upon.

For recording on this set you should use a cassette of the type

NORMAL (IEC type I). This deck is not suitable for recording on

cassettes of the type CHROME (IEC type II) or METAL (IEC

type IV).

The recording level is set automatically. The controls VOLUME and

DBB do not affect the recording.

At the very beginning and end of the tape, no recording will take

place in the 7 seconds during which the leader tape passes the

recorder heads.

Protecting tapes from accidental erasure

Keep the cassette side to be protected in front of you and snap off

the left tab. Now, recording on this side is no longer possible.

To record again on this side of the cassette, cover the opening with

a piece of adhesive tape.

General information on recording

OPEN•STOP

SEARC

PAUSE

CD RADIO CASSETTE RECORDER

AZ1050

PLA

RECORD

Playing a cassette

English

AZ 1050 /17 page 12

CASSETTE RECORDER

AZ1050/17 eng usa 8/1/01 14:47 Page 12

1Set the POWER control to CD.

2Insert a CD and, if desired, program the track numbers.

3Press OPEN·STOP /9to open the cassette compartment.

4Insert a blank, unprotected cassette and close the cassette

compartment.

5Press RECORD 0to start recording.

™Playing of the CD or program starts automatically.

6For brief interruptions, press PAUSE ;. Press the PAUSE ;key

again to resume recording.

7To stop recording, press OPEN·STOP /9.

Note: the recording can be started from different positions:

– if the CD player is in pause mode, recording will start

from this very position (use

∞

);

– if the CD player is in stop mode, recording will start from

the beginning of the CD or program.

1Tune to the desired radio station (see ”RADIO”).

2Press OPEN·STOP /9to open the cassette compartment.

3Insert a blank, unprotected cassette and close the cassette

compartment.

4Press RECORD 0to start recording.

5For brief interruptions press PAUSE ;. To resume recording press

the PAUSE ;key again.

6To stop recording, press OPEN·STOP /9.

Recording from the radio

OPEN•STOP

PAUSE

CD RADIO CASSETTE RECORDER

AZ1050

PLAY

RECORD

Recording from the CD player – CD synchro start

English

AZ 1050 /17 page 13

CASSETTE RECORDER

AZ1050/17 eng usa 8/1/01 14:47 Page 13

Do not expose the set, batteries, CDs, or tapes to humidity,

rain, sand, or excessive heat (caused by heating equipment or

direct sunlight).

The mechanical parts of the set contain self-lubricating bearings

and must not be oiled or lubricated!

You can clean the set with a soft, slightly dampened, lint-free cloth.

Do not use any cleaning agents as they may have a corrosive effect.

To ensure proper recording and playback quality, clean parts

A, Band Cafter approximately 50 hours of operation. Use a

cotton swab slightly moistened with alcohol or head-cleaner fluid.

Press PLAY 1and clean the rubber pressure roller A.

Press PAUSE ;and clean the capstan Band the heads C.

Note: Cleaning of the heads

can also be done by playing a

cleaning tape once.

The lens Xof the CD player should never be touched. Always

keep the CD compartment closed to avoid dust on the lens.

The lens may cloud over when the set is suddenly moved from cold

to warm surroundings. Playing a CD is not possible then. Leave the

CD player in a warm environment until the moisture evaporates.

To take the CD out of its box easily, press the center spindle while

lifting the CD.Always pick up the CD by the edge and put it back

in its box after use.

To clean the CD, wipe it in a straight line from the center toward

the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc!

Never write on a CD or attach a sticker to it.

TOP OPEN

SEARCH PLAY RECORD

PEEDDUBBING

CD player and CD handling

CD RADIO CASSETTE RECORDER

Tape deck maintenance

AM/FM

103

105

107

CDRADIOCLASSETTERECORDING

AZ1055

SHUFFLE

PROGRAM

•

General maintenance

English

AZ 1050 /17 page 14

GENERAL INFORMATION

CAUTION

Use of controls or adjustments or performance of procedures other than here-

in may result in hazardous radiation exposure.

AZ1050/17 eng usa 8/1/01 14:47 Page 14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips CD-Player Handbücher

Philips

Philips AX5200 Bedienungsanleitung

Philips

Philips AZ 1145 Bedienungsanleitung

Philips

Philips ACT400/17 Bedienungsanleitung

Philips

Philips EXP2461 Expanium Bedienungsanleitung

Philips

Philips AX2300 Bedienungsanleitung

Philips

Philips AZ8567/05 Bedienungsanleitung

Philips

Philips AX2201 Bedienungsanleitung

Philips

Philips EXP321 Expanium Bedienungsanleitung

Philips

Philips DVP315OV/37 Bedienungsanleitung

Philips

Philips EXP2550/17 Bedienungsanleitung

Philips

Philips AZ 7162/00 Bedienungsanleitung

Philips

Philips AZ8052/05 Bedienungsanleitung

Philips

Philips AZ 9003/01 Bedienungsanleitung

Philips

Philips AZ6846 Bedienungsanleitung

Philips

Philips EXP2550/58 Bedienungsanleitung

Philips

Philips AZ 2804 Bedienungsanleitung

Philips

Philips CD304 MK II Bedienungsanleitung

Philips

Philips AZ6897 - annexe 1 Bedienungsanleitung

Philips

Philips Expanium AZ 5150 Bedienungsanleitung

Philips

Philips AZ5737 Bedienungsanleitung

Philips

Philips AZ 1045 Bedienungsanleitung

Philips

Philips PX3225GT Bedienungsanleitung

Philips

Philips Shockproof AX2102 Bedienungsanleitung

Philips

Philips AZ9015 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung

Optimus

Optimus CD-8250 Bedienungsanleitung

Audiovox

Audiovox CE101A - annexe 1 Bedienungsanleitung