Philips SUP 037DR Bedienungsanleitung

OPERATING INSTRUCTIONS

READ THESE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE.

English

www.philips.com/welcome

Type HD8836 / HD8837

SUP 037DR

• 2 •

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be

followed, including the following:

1. Read all instructions.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against fire, electric shock and injury to persons do not immerse

cord, plugs, or appliance in water or other liquid.

4. Close supervision is necessary when the appliance is used by or near

children.

5. Unplug from outlet when not in use and before cleaning. Allow to cool

before putting on or taking off parts, and before cleaning the appliance.

6. Do not operate any appliance with a damaged cord or plug or after the

appliance malfunctions, or has been damaged in any manner. Return

appliance to the nearest authorized service facility for examination, repair

or adjustment.

7. The use of accessory attachments not recommended by the appliance

manufacturer may result in fire, electric shock or injury to persons.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10.Do not place on or near a hot gas or electric burner, or in a heated oven.

11.Always attach plug to appliance first, then plug cord into wall outlet. To

disconnect, turn any control to “off”, then remove plug from wall outlet.

12.Do not use appliance for other than intended use.

13.Save these instructions.

SAVE THESE INSTRUCTIONS

• 3 •

CAUTION

This appliance is for household use only. Any servicing, other than cleaning and

user maintenance, should be performed by an authorized service center. Do not

immerse machine in water. To reduce the risk of fire or electric shock, do not

disassemble the machine. There are no parts inside the machine serviceable by

the user. Repair should be done by authorized service personnel only.

1. Check voltage to be sure that the voltage indicated on the nameplate

corresponds with your voltage.

2. Never use warm or hot water to fill the water tank. Use cold water only.

3. Keep your hands and the cord away from hot parts of the appliance during

operation.

4. Never clean with scrubbing powders or harsh cleaners. Simply use a soft

cloth dampened with water.

5. For optimal taste of your coffee, use purified or bottled water. Periodic

descaling is still recommended every 2-3 months.

6. Do not use caramelized or flavored coffee beans.

INSTRUCTIONS FOR THE POWER

SUPPLY CORD

A. A short power-supply cord (or detachable power-supply cord) is to be

provided to reduce risks resulting from becoming entangled in or tripping

over a longer cord.

B. Longer detachable power-supply cords or extension cords are available

and may used if care is exercised in their use.

C. If a long detachable power-supply cord or extension cord is used,

1. The marked electrical rating of the detachable power-supply cord or

extension cord should be at least as great as the electrical rating of the

appliance

2. If the appliance is of the grounded type, the extension cord should be a

grounding-type 3-wire cord, and

3. The longer cord should be arranged so that it will not drape over the

counter top or table top where it can be pulled on by children or tripped

over.

• 4 •

GENERAL INFORMATION

The coee machine is suitable for preparing espresso coee using either coee beans or ground

coee and is equipped with a device to dispense steam and hot water. The structure of the ma-

chine has been designed for domestic use only and is not suitable for continuous professional-

type operation.

Keeptheseoperatinginstructions in a safe place and makethemavailabletoanyone

who may use the coee machine.

For further information or in case of problems that are not included or not completely explained

in these instructions, please contact an authorized service center.

Warning. No liability is held for damage caused by:

• Incorrect use not in accordance with the intended purposes;

• Repairs not carried out by authorized service centers;

• Tampering with the power cord;

• Tampering with any parts of the machine;

• Storage or use of themachine at a temperature outside the operating temperature

range (+15°C / +45°C);

• The use of non-original spare parts and accessories.

In these cases, the warranty shall be deemed null and void.

SAFETY REGULATIONS

Never allow water to come into contact with any of the electrical parts of the

machine: Danger of short circuit! Steam and hot water may cause scalding!

Do not direct the steam/hot water wand towards body parts. Carefully handle the

steam/hot water wand by its grip: Danger of scalding!

Intended Use

The coee machine is intended for domestic use only. Do not make any technical changes or use

the machine for unauthorized purposes since this would create serious hazards! The appliance is

not to be used by persons (including children) with reduced physical, mental or sensory abilities

or with limited experience and/or expertise, unless they are supervised by a person responsible

for their safety, or they are instructed by this person on how to properly use the machine.

Power Supply - Power Cord

Only connect the coee machine to a suitable socket.

The voltage must correspond to that indicated on the machine label located on the inside of

service door.

Never use the coee machine if the power cord is defective or damaged.

If damaged, the power cord must be replaced by the manufacturer or an authorized service

center. Do not pass the power cord around corners, over sharp edges or over hot objects and

keep it away from oil. Do not use the power cord to carry or pull the coee machine.

Do not pull out the plug by the power cord or touch it with wet hands. Do not let the power cord

hang freely from tables or shelves.

For the Safety of Others

Keep children under control to prevent them from playing with the product. Children are not

aware of the risks related to electric household appliances. Do not leave the machine packaging

materials within the reach of children.

• 5 •

Danger of Burns

Never direct the steam/hot water wand towards yourself or others: Danger of scalding! Always

use the handles or knobs provided.

Machine Location - Suitable Location for Operation and Maintenance

For best use, it is recommended to:

• Choose a safe, level surface, where there will be no danger of overturning it or being inju-

red.

• Choose a location that is suciently well-lit, clean and near an easily reachable socket.

• Provide for a minimum distance from the sides of the machine as shown in the illustration.

• During machine turning on/o, it is recommended to place an empty glass under the dispen-

sing spout.

Do not keep the machine at a temperature below 0°C (32°F).

Frost may damage the machine.

Do not use the coee machine outdoors.

In order to prevent its housing from melting or being damaged, do not place the machine on

very hot surfaces and close to open ames.

Storing the Machine - Cleaning

Before cleaning the machine, turn it o by pressing the ON/OFF button, and then switch the

power button to“0”. Remove the plug from the socket.

Wait for the machine to cool down.

Never immerse the machine in water!

It is strictly forbidden to tamper with the internal parts of the machine.

Water left in the tank for several days should not be consumed. Wash the tank and ll it with

fresh drinking water.

If the machine will not be used for a long time, dispense water from the steam wand, and care-

fully clean the Pannarello (if supplied), then turn it o and unplug it.

Store it in a dry place, out of the reach of children.

Keep it protected from dust and dirt.

Since the machine uses natural ingredients to brew beverages (fresh ground coee, water, milk,

etc.), some residues of coee ground or condensed water would denitely be present on its

supporting surface.

For this reason we recommend to periodically clean both the visible parts of the machine and

the area beneath it.

Servicing / Maintenance

In case of failure, problems or a suspected fault resulting from the falling of the machine, imme-

diately remove the plug from the socket.

Never attempt to operate a faulty machine.

Servicing and repairs may only be carried out by authorized service centers.

All liability for damages resulting from work not carried out by professionals is declined.

Fire Safety Precautions

In case of re, use carbon dioxide (CO2) extinguishers. Do not use water or dry powder extin-

guishers.

• 6 •

Coee bean hopper lid

Power cord

Pre-ground coee scoop

Intenza water lter

(Optional)

Brew group lubricant

LCD Display

“Aroma”- Pre-ground coee

selector button.

Strong coee brew button

Long coee brew button

Coee/hot water/steam dial.

ON/OFF button

Brew group

Coee grounds drawer

Service door

Grinder adjustment knob

Pre-ground coee

compartment

Coee bean hopper

Dispensing spout

Drip tray

Power button

Full drip tray indicator

Drip tray

Water tank

Steam/hot water wand

Wand protective gripper

Control panel

Water hardness test strip

• 7 •

INSTALLATION

For your own and for other people’s

safety, carefully follow the instruc-

tions provided in the“Safety Regula-

tions” section.

Machine Packaging

The original packaging has been designed

and constructed to protect the machine

during transport. We recommend keep-

ing the packaging material for possible

future transport.

Preliminary Operations

• Remove the coffee bean hopper lid

and the drip tray with grill from the

packaging.

• Remove the coee machine from the

packaging and position it in a place

that meets the requirements described

in the safety regulations.

• Place the drip tray with grill into its

appropriate seat on the machine. Make

sure it is fully inserted and clicks into

place.

• Place the coee bean hopper lid on the

bean hopper.

Note: Insert the plug in the

machine and in the wall so-

cket only when indicated and check

that the power button is switched

to “0”.

Important Note: Carefully

read the explanations of all

the warnings displayed on the LCD

control panel (section “LCD Display

Warnings”).

Never remove the drip tray

when the machine is turned

on. Wait a couple of minutes after

turning on/off, since the machine

will be carrying out a rinse/self-

cleaning cycle (see section “Rinse/

Self-cleaning Cycle”).

• Remove the water tank.

• Fill the tank with fresh drinking water.

Do not exceed the “max” level indi-

cated on the water tank. Once filled,

place the tank back into the machine.

Fill the tank only with fresh,

non-sparkling water. Hot wa-

ter or any other liquid may damage

the tank and/or the machine. Do not

turn on the machine when the tank

is empty. Make sure there is enough

water in the tank.

• Remove the coee bean hopper lid.

Note:Thehopper maybepro-

vided with different safety

featuresaccordingto the regulations

of the country of use of the machine.

• Slowly pour the coee beans into the

hopper.

Only coee beans may be put

into the coee bean hopper.

Ground coffee, instant coffee or

any other object may damage the

machine.

• Replace the coee bean hopper lid.

• Insert the plug into the socket on the

back of the machine.

• Insert the plug of the other end of the

cable into a wall socket with suitable

power voltage.

• 8 •• 8 •

Red

Orange

Green

• Switch the power button to “I” to turn

on the machine. Priming the Water Circuit

• To prime the water circuit, place a

container under the steam/hot water

wand (Pannarello, if supplied).

• The display shows the ON/OFF icon.

• Make sure the selector dial is set to the

“” position; if this is not the case, set

it to that position.

• Press the ON/OFF button to turn the

machine on.

• The display indicates that the circuit

must be primed.

Note: Before starting the

machine after long periods

of inactivity, the water circuit must

be primed.

Black

Red

• Turn the selector dial clockwise to set

it to the “ ” position. The machine

starts the automatic priming of the

circuit by letting out a preset quantity

of water through the steam/hot water

wand (Pannarello, if supplied). The bar

under the icon shows the operation

progress.

At the end of the priming process,

the display shows an icon (see fig-

ure) indicating that the selection dial

must be brought back to the central

“ ”position.

• The display then shows the machine

warm-up icon, as shown in the gure.

When warm-up is complete,

themachineperformsarinse

cycle of the internal circuits.

In this phase, this icon will be dis-

played:

• When the operations described above

are complete, this icon will be dis-

played:

The machine is then ready to brew

beverages.

• To brew coee, dispense hot water or

steam, and for a proper use of the ma-

chine, carefully follow the instructions

provided.

If the machine is being used

for the rst time or after a

long period of inactivity, follow the

operations described in the follow-

ing section.

• 9 •

Orange

Green

Red

Using the machine for the

first time or after a long

period of inactivity.

These simple operations will make it pos-

sible to always brew excellent coee.

1 Place a large container under the

dispensing spout.

2 Before starting the procedure, check

that the following icon is displayed.

3 Select the pre-ground coee function

by pressing the “ “ button one or

more times.

Do not add the pre-ground

coee to the compartment.

The icon will appear on the display.

4 Press the button to brew a long cof-

fee.

5 Wait until brewing is completed and

empty the water tank.

6 Repeat the operations from step 1 to

step 5 for 3 times; then continue with

step 7.

7 Placeacontainerunderthe steamwand

(Pannarello, if supplied).

8 Turn the selector dial clockwise to set it

to the “ ”position.

The following icon will be displayed.

9 Dispense water until the no water

signal is displayed, then turn the se-

lector dial counter-clockwise to set it

to the “ ”position.

10 At the end, fill the water tank again.

Then the products can be brewed as

described in the following sections.

Rinse/Self-Cleaning Cycle

This cycle will rinse coffee circuits with

fresh water.

The cycle is carried out:

• At machine start (with cold boiler)

• After priming the water circuit (with

cold boiler)

• During the stand-by mode (if a coee

product has been brewed)

• If the machine is turned o by pressing

the ON/OFF button (if a coee product

has been brewed).

A small amount of water will be dis-

pensed to rinse and heat all the machine

components; in this phase this icon is

displayed:

Wait for the cycle to nish automatically.

You can stop dispensing as well, by

pressing either coee button and/or

the ON/OFF button.

• 10 •• 10 •

Intenza Water Filter

To improve the quality of the used water,

it is recommended that you install the

water lter.

Remove the water lter from its packag-

ing, immerse it vertically (with the open-

ings positioned upwards) in cold water

and gently press its sides so as to let the

air bubbles out.

Remove the small white filter from the

tank and store it in a dry place sheltered

from dust.

Set the Intenza Aroma System as specied

on the box.

A = Soft water

B = Hard water (standard)

C = Very hard water

Water hardness measurement

The water hardness measurement is very

important in order to correctly manage

the“Intenza”lter and the frequency with

which the machine must be descaled.

Immerse the water hardness test strip

provided with the machine in water for

1 second.

Note: The test strip is only

valid for one measurement.

Check how many squares change colour

and refer to the table.

The letters correspond to the references

that are located in the base of the Intenza

lter. The lter must be adjusted based on

this measurement.

The numbers correspond to the settings

that are found for the water hardness ad-

justment that is shown in the program-

ming section.

More precisely:

1 = (very soft water)

2 = (soft water)

3 = (hard water)

4 = (very hard water)

Once this value is known, set the water

hardness value as specified in the pro-

gramming section.

Insert the filter in the empty tank. The

reference mark and the groove must

match. Push rmly until it is completely

inserted.

Fill the tank with fresh drinking water and

re-insert it into the machine.

Dispense the water in the tank by using

the hot water function (see section “Hot

Water Dispensing”).

Fill the water tank again.

Press the ON/OFF button to change the

machine status to stand-by mode.

23 4

ABC

Intenza Aroma System

Machine water hardness setting

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Kaffeemaschine Handbücher

Philips

Philips 4000 series Bedienungsanleitung

Philips

Philips Saeco Moltio Bedienungsanleitung

Philips

Philips HD5414 Bedienungsanleitung

Philips

Philips 5400 Series Bedienungsanleitung

Philips

Philips HD7215/22 Bedienungsanleitung

Philips

Philips Senseo HD7812 Bedienungsanleitung

Philips

Philips 3100 CMF-AMF-OTC Bedienungsanleitung

Philips

Philips HD7535 Bedienungsanleitung

Philips

Philips HD7825/62 Bedienungsanleitung

Philips

Philips HD8847 Montageanleitung

Philips

Philips Saeco Intellia HD8753 Bedienungsanleitung

Philips

Philips Senseo HD7824/50/B Bedienungsanleitung

Philips

Philips HD7817/40 Bedienungsanleitung

Philips

Philips Carezza Deluxe RI8525/08 Bedienungsanleitung

Philips

Philips Saeco INTELIA EVO HD8754 Bedienungsanleitung

Philips

Philips Senseo HD6563 Bedienungsanleitung

Philips

Philips Saeco Intelia Evo Bella Bedienungsanleitung

Philips

Philips HD 7820/65 Bedienungsanleitung

Philips

Philips Saeco Xelsis SM7583 Bedienungsanleitung

Philips

Philips HD7753 Bedienungsanleitung

Philips

Philips SENSEO HD7854 Bedienungsanleitung

Philips

Philips HD7761 Bedienungsanleitung

Philips

Philips HD8651 Bedienungsanleitung

Philips

Philips EP 4300 Series Bedienungsanleitung

Beliebte Kaffeemaschine Handbücher anderer Marken

Taurus

Taurus Livorno 6 Bedienungsanleitung

Delta-q

Delta-q QUICK Bedienungsanleitung

Bunn

Bunn LCA-1 Fehlerbehebungshandbuch

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Montageanleitung

Saeco

Saeco Vienna Plus Sup 018M Bedienungsanleitung

DeLonghi

DeLonghi DC300 Bedienungsanleitung

INCAPTO

INCAPTO BXCO1470E Bedienungsanleitung

Bosch

Bosch TASSIMO finesse TAS16B Series Bedienungsanleitung

Exido

Exido 245-072 Bedienungsanleitung

Animo

Animo OptiVend Choco Bedienungsanleitung

Siemens

Siemens TQ505DF Series Bedienungsanleitung

DeLonghi

DeLonghi ECI341 Bedienungsanleitung

Krups

Krups KT406511 Bedienungsanleitung

Cimbali

Cimbali M32 Classic Bedienungsanleitung

Bosch

Bosch TES 515 SERIES Bedienungsanleitung

Tekmatix

Tekmatix TMFM - 65 Bedienungsanleitung

Scarlett

Scarlett SC-CM33005 Bedienungsanleitung

LAVAZZA

LAVAZZA CLASSY PLUS Bedienungsanleitung