Philips IR dongle Bedienungsanleitung

IR Dongle

v2.0

Quick Start Guide

December 2018

Work with IR Dongle

v2.0 in the field

This dongle is for use with compatible

phones to enable IR (infrared) for field

configuration and grouping of EasyAir,

office/industry sensor families.

Luminaires

Importance of installer’s positioning for correct commissioning

of SNH200 using IR Dongle

Tips for Use:

✓Allow all pop-up messages in Philips Field Apps (e.g. “Allow

Philips Field Apps to record audio? Allow Philips Field Apps

to access photos, media and files on your device?”).

✓Aim the emitter of the dongle at the target luminaire using

the IR dongle and check the light behavior according to

steps in the App to confirm the command gets executed.

(light dimmed, light blinks twice, etc.)

✓Invert Signal in the Preferences within app when the LED

blinks 6 times.

Note: Remember to switch off the LEDs when not in use to

save battery and for longer lifetime

Working with Philips Field Apps

You must first register for Philips Field Apps to receive a

username and password, then download Philips Field Apps

from Google Play Store.

Technical specifications

Maximum mounting height Ambient temperature range

16m/50ft From -10 ºC to 50 ºC

Ordering data

Commercial product name 12NC

IR Dongle v2.0 929001678906

For compatible phones, refer to the Technical Downloads.

2 - 4

Quick Start Guide - IR Dongle v2.0 December 2018

Visual Feedback

LED blinks 3 times:

OK to proceed

LED blinks 6 times:

“Invert Signal” in Preferences of Philips Field Apps.

Selection Switch

2 LEDs are available for use depending upon the application:

• An LED (on top side) for long distance communication; ideal for

highbay/industry application (upto 16m)

• An LED (on side) for short distance communication; ideal for office

applications (upto 8m)

IR Dongle v2.0

Signal LED

(red in colour)

Long

Distance

(highbay)

Short Distance

(office)

Short Distance (office)

OFF

Long Distance (highbay)

3 - 4

Quick Start Guide - IR Dongle v2.0 December 2018

IR Dongle v2.0

Battery Replacement

The battery can be replaced by opening the IR dongle by

2 screws. Type of battery: CR2032. Follow the steps shown

below to replace the battery.

Recommended suppliers:

• Panasonic

• Varta

• Energizer

1Disassemble the IR Dongle and replace the battery

with identical polarity as shown on Figure 1.

2Once, the battery is replaced, connect the part with

the bottom cover. Observe the orientation of (1).

Figure 1

Disassemble of IR Dongle

Figure 2

Assemble the parts

3Assemble both parts. Make sure that the sides are well

attached and fit the matching screw holes together..

4Screw up the screws in a clockwise direction.

Figure 4

Attach the screws

Figure 3

Bring together

the two parts

without notice. Signify does not give any representation or warranty as to the accuracy or

completeness of the information included herein and shall not be liable for any action in reliance

thereon. The information presented in this document is not intended as any commercial offer and

does not form part of any quotation or contract, unless otherwise agreed by Signify.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other

trademarks are owned by Signify Holding or their respective owners.

01/2019

Data subject to change

www.lighting.philips.co.uk/oem-emea/

products/connected-lighting

Dieses Handbuch passt für folgende Modelle

Andere Philips Computerhardware Handbücher

Philips

Philips SA615 Bedienungsanleitung

Philips

Philips v2.0 Bedienungsanleitung

Philips

Philips OVU760001/01 Bedienungsanleitung

Philips

Philips 9305 125 2477.5 Bedienungsanleitung

Philips

Philips ST7SB Bedienungsanleitung

Philips

Philips AC4086 Bedienungsanleitung

Philips

Philips DDR1010 Bedienungsanleitung

Philips

Philips ISYSTEM LPC2138 Bedienungsanleitung

Philips

Philips SDJ6070W Bedienungsanleitung

Philips

Philips LTC2272/50 Bedienungsanleitung

Philips

Philips SAA7345 Bedienungsanleitung

Philips

Philips Logic Level TOPFET PIP3107-D Bedienungsanleitung

Philips

Philips 22AV1132 Bedienungsanleitung

Philips

Philips TDA9605H Bedienungsanleitung

Philips

Philips Logic level TOPFET PIP3119-P Bedienungsanleitung

Philips

Philips CRD01DT Bedienungsanleitung

Philips

Philips Light Palette 64428 Handbuch

Philips

Philips SA606 Bedienungsanleitung

Philips

Philips UM10011 Bedienungsanleitung

Philips

Philips P89LPC906 Bedienungsanleitung

Philips

Philips TC8276 Series Bedienungsanleitung

Philips

Philips ISP1520 Bedienungsanleitung

Philips

Philips P89LPC902 Bedienungsanleitung

Philips

Philips PBRW5232G/30 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung