Philips SE1453B/05 Bedienungsanleitung

7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06

Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

Speciﬁcations are subject to change without notice.

Document order number: 3111 285 38011 (GB)

Printed in P.R.C.

Troubleshooting

For more solutions, see the full FAQs section in the main guide.

No dialling tone

• Check the connections.

Unplug your phone then plug

back in the mains power.

• Batteries are empty –

charge the batteries for

at least 24 hours.

• You may be too far from

the base – move closer.

• Use the line cable provided.

Poor sound quality

• Move closer to the base.

• Move the base at least one

metre away from any electrical

appliances.

The icon is blinking

• Move closer to the base.

• Register the handset to

the base.

Caller Line Identiﬁcation

does not work

Check your subscription with

your network operator.

No ring tone

If the icon is displayed, the

ringer is switched off. Increase

the ringer volume. For details,

see the main guide.

Need help?

See the user manual that came with your Philips SE140 or SE145.

Online help: www.philips.com/support

Welcome

Quick start guide

Connect

Install

Enjoy

Digital cordless phone SE140

Digital cordless phone with answering machine SE145

3Enjoy

Make a call

Enter the phone number and

press .

Answer a call

When the phone rings, press .

End a call

Press .

Adjust earpiece volume

During a call, press or .

Redial last number

Press then .

Change the ringer volume

and ringtone

• Press .

• Press or to adjust the

ringer volume level (0=off).

• Press 0–9 to select the ringtone.

A sample ringtone is played.

• Press to save the settings.

Add entry to phonebook

• Press then .

• Choose a position in the

phonebook by entering a

2-digit number between 01–20.

• Enter the phone number, then

press to conﬁrm.

Dial from the phonebook

• Press , then scroll or

to the entry you want.

• Press to dial.

Set date and time

• Press twice.

• Enter the date (DD-MM) and

time (HH:MM).

• Press to conﬁrm.

• Press to return to standby.

SE145 only

Switch the answering

machine off and on

Press at the base.

Listen to your messages

Press . Your new messages

are played.

Press and hold to hear

all messages stored on your

machine.

7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06

1Connect

Position the base

Place the base within reach of

the telephone line and power

sockets.

Connect the cables

Plug the line cord and power

cable into the sockets at the

back of the base.

Plug the other end of the cables

into the wall sockets.

Tip

Placing the base too close to

large metal objects or electrical

appliances can impair the range

and sound quality. Thick walls

may also impair transmission of

signals to and from the base.

Plug into the sockets

2Install

Install the batteries

Insert the batteries and slide the

battery door into place.

Charge handset

Place the handset on the base to

charge the batteries. The battery

icon is displayed.

Set up your phone

If the display shows the standby

screen, your phone is ready

to use.

If the display shows

CODE:

you

must select the country code

for your area. Please see page 15

in the main user guide for more

information.

• Scroll or to display the

correct code.

• Press to conﬁrm.

The handset and base will reset

to load the correct settings and

the standby screen is displayed.

SE140 – your phone is ready

to use.

SE145 – your phone is ready

to use. The answering machine

is automatically set to On and

ready to record messages.

Warning

Leave the handset to charge for

at least 24 hours before ﬁrst use.

Notes

* The line adaptor may not be attached to the line cord. If this is

the case, please connect the line cord to the line adaptor before

plugging it into the line socket.

• If you have purchased a multipack you will have additional handsets,

chargers, power adaptors and AAA rechargeable batteries.

Warning

Always use the cables and batteries supplied.

Warranty informationUser manual Quick start guide













What’s in the box?

2x AAA rechargeable

batteries

Line cord* Battery door

Power adaptorSE140/SE145 handset SE140 or SE145 base

















 

 

7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06

1Connect

Position the base

Place the base within reach of

the telephone line and power

sockets.

Connect the cables

Plug the line cord and power

cable into the sockets at the

back of the base.

Plug the other end of the cables

into the wall sockets.

Tip

Placing the base too close to

large metal objects or electrical

appliances can impair the range

and sound quality. Thick walls

may also impair transmission of

signals to and from the base.

Plug into the sockets

2Install

Install the batteries

Insert the batteries and slide the

battery door into place.

Charge handset

Place the handset on the base to

charge the batteries. The battery

icon is displayed.

Set up your phone

If the display shows the standby

screen, your phone is ready

to use.

If the display shows

CODE:

you

must select the country code

for your area. Please see page 15

in the main user guide for more

information.

• Scroll or to display the

correct code.

• Press to conﬁrm.

The handset and base will reset

to load the correct settings and

the standby screen is displayed.

SE140 – your phone is ready

to use.

SE145 – your phone is ready

to use. The answering machine

is automatically set to On and

ready to record messages.

Warning

Leave the handset to charge for

at least 24 hours before ﬁrst use.

Notes

* The line adaptor may not be attached to the line cord. If this is

the case, please connect the line cord to the line adaptor before

plugging it into the line socket.

• If you have purchased a multipack you will have additional handsets,

chargers, power adaptors and AAA rechargeable batteries.

Warning

Always use the cables and batteries supplied.

Warranty informationUser manual Quick start guide













What’s in the box?

2x AAA rechargeable

batteries

Line cord* Battery door

Power adaptorSE140/SE145 handset SE140 or SE145 base

















 

 

7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06

1Connect

Position the base

Place the base within reach of

the telephone line and power

sockets.

Connect the cables

Plug the line cord and power

cable into the sockets at the

back of the base.

Plug the other end of the cables

into the wall sockets.

Tip

Placing the base too close to

large metal objects or electrical

appliances can impair the range

and sound quality. Thick walls

may also impair transmission of

signals to and from the base.

Plug into the sockets

2Install

Install the batteries

Insert the batteries and slide the

battery door into place.

Charge handset

Place the handset on the base to

charge the batteries. The battery

icon is displayed.

Set up your phone

If the display shows the standby

screen, your phone is ready

to use.

If the display shows

CODE:

you

must select the country code

for your area. Please see page 15

in the main user guide for more

information.

• Scroll or to display the

correct code.

• Press to conﬁrm.

The handset and base will reset

to load the correct settings and

the standby screen is displayed.

SE140 – your phone is ready

to use.

SE145 – your phone is ready

to use. The answering machine

is automatically set to On and

ready to record messages.

Warning

Leave the handset to charge for

at least 24 hours before ﬁrst use.

Notes

* The line adaptor may not be attached to the line cord. If this is

the case, please connect the line cord to the line adaptor before

plugging it into the line socket.

• If you have purchased a multipack you will have additional handsets,

chargers, power adaptors and AAA rechargeable batteries.

Warning

Always use the cables and batteries supplied.

Warranty informationUser manual Quick start guide













What’s in the box?

2x AAA rechargeable

batteries

Line cord* Battery door

Power adaptorSE140/SE145 handset SE140 or SE145 base

















 

 

7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06

Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

Speciﬁcations are subject to change without notice.

Document order number: 3111 285 38011 (GB)

Printed in P.R.C.

Troubleshooting

For more solutions, see the full FAQs section in the main guide.

No dialling tone

• Check the connections.

Unplug your phone then plug

back in the mains power.

• Batteries are empty –

charge the batteries for

at least 24 hours.

• You may be too far from

the base – move closer.

• Use the line cable provided.

Poor sound quality

• Move closer to the base.

• Move the base at least one

metre away from any electrical

appliances.

The icon is blinking

• Move closer to the base.

• Register the handset to

the base.

Caller Line Identiﬁcation

does not work

Check your subscription with

your network operator.

No ring tone

If the icon is displayed, the

ringer is switched off. Increase

the ringer volume. For details,

see the main guide.

Need help?

See the user manual that came with your Philips SE140 or SE145.

Online help: www.philips.com/support

Welcome

Quick start guide

Connect

Install

Enjoy

Digital cordless phone SE140

Digital cordless phone with answering machine SE145

3Enjoy

Make a call

Enter the phone number and

press .

Answer a call

When the phone rings, press .

End a call

Press .

Adjust earpiece volume

During a call, press or .

Redial last number

Press then .

Change the ringer volume

and ringtone

• Press .

• Press or to adjust the

ringer volume level (0=off).

• Press 0–9 to select the ringtone.

A sample ringtone is played.

• Press to save the settings.

Add entry to phonebook

• Press then .

• Choose a position in the

phonebook by entering a

2-digit number between 01–20.

• Enter the phone number, then

press to conﬁrm.

Dial from the phonebook

• Press , then scroll or

to the entry you want.

• Press to dial.

Set date and time

• Press twice.

• Enter the date (DD-MM) and

time (HH:MM).

• Press to conﬁrm.

• Press to return to standby.

SE145 only

Switch the answering

machine off and on

Press at the base.

Listen to your messages

Press . Your new messages

are played.

Press and hold to hear

all messages stored on your

machine.

7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06 7889 – Philips SE14x QSG – 04 – 08.12.06

Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

Speciﬁcations are subject to change without notice.

Document order number: 3111 285 38011 (GB)

Printed in P.R.C.

Troubleshooting

For more solutions, see the full FAQs section in the main guide.

No dialling tone

• Check the connections.

Unplug your phone then plug

back in the mains power.

• Batteries are empty –

charge the batteries for

at least 24 hours.

• You may be too far from

the base – move closer.

• Use the line cable provided.

Poor sound quality

• Move closer to the base.

• Move the base at least one

metre away from any electrical

appliances.

The icon is blinking

• Move closer to the base.

• Register the handset to

the base.

Caller Line Identiﬁcation

does not work

Check your subscription with

your network operator.

No ring tone

If the icon is displayed, the

ringer is switched off. Increase

the ringer volume. For details,

see the main guide.

Need help?

See the user manual that came with your Philips SE140 or SE145.

Online help: www.philips.com/support

Welcome

Quick start guide

Connect

Install

Enjoy

Digital cordless phone SE140

Digital cordless phone with answering machine SE145

3Enjoy

Make a call

Enter the phone number and

press .

Answer a call

When the phone rings, press .

End a call

Press .

Adjust earpiece volume

During a call, press or .

Redial last number

Press then .

Change the ringer volume

and ringtone

• Press .

• Press or to adjust the

ringer volume level (0=off).

• Press 0–9 to select the ringtone.

A sample ringtone is played.

• Press to save the settings.

Add entry to phonebook

• Press then .

• Choose a position in the

phonebook by entering a

2-digit number between 01–20.

• Enter the phone number, then

press to conﬁrm.

Dial from the phonebook

• Press , then scroll or

to the entry you want.

• Press to dial.

Set date and time

• Press twice.

• Enter the date (DD-MM) and

time (HH:MM).

• Press to conﬁrm.

• Press to return to standby.

SE145 only

Switch the answering

machine off and on

Press at the base.

Listen to your messages

Press . Your new messages

are played.

Press and hold to hear

all messages stored on your

machine.

Andere Handbücher für SE1453B/05

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Schnurloses Telefon Handbücher

Philips

Philips SE7652B/38 Bedienungsanleitung

Philips

Philips CD1401B/51 Bedienungsanleitung

Philips

Philips CD1802B/90 Bedienungsanleitung

Philips

Philips D1211B Bedienerhandbuch

Philips

Philips B196W Bedienerhandbuch

Philips

Philips CD1503B/17 Bedienungsanleitung

Philips

Philips SE7301B Bedienungsanleitung

Philips

Philips M665 Bedienerhandbuch

Philips

Philips CD1501B Bedienungsanleitung

Philips

Philips CD 450 Bedienungsanleitung

Philips

Philips D4050W Produktinformationsblatt

Philips

Philips DECT3111B/51 Bedienungsanleitung

Philips

Philips CD2752S/90 Bedienungsanleitung

Philips

Philips VOIP4331S Bedienungsanleitung

Philips

Philips DCTG2401S/94 Bedienungsanleitung

Philips

Philips SE735 Bedienungsanleitung

Philips

Philips CD1503B/17 Bedienungsanleitung

Philips

Philips CD1554B Bedienungsanleitung

Philips

Philips CD 150 Bedienungsanleitung

Philips

Philips TU7372 Bedienungsanleitung

Philips

Philips D630 Bedienerhandbuch

Philips

Philips M5501WG Bedienerhandbuch

Philips

Philips XL6651C/22 Bedienungsanleitung

Philips

Philips DECT5212S Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung