Philips DS7520/93 Bedienungsanleitung
Register your product and get support at
www.philips.com/welcome
Always there to help you
DS7520/93
User manual
Question?
Contact
Philips
2
English
EN
Contents
1 Important 3
2 Your Docking Speaker 4
Introduction 4
What's in the box 4
Overview of the main unit 5
3 Get started 6
Connect power 6
Turn on 7
4 Play 8
Play from iPod/iPhone 8
Play from an external audio device 9
Adjust volume 9
Enrich sound output 9
5 Product information 10
Specications 10
6 Troubleshooting 11
7 Notice 12
3EN
1 Important
• Follow all instructions.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
otherapparatus(includingampliers)that
produce heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Unplug this apparatus during lightning
storms or when unused for long periods
of time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbonandalkaline,etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed)shallnotbeexposedto
excessiveheatsuchassunshine,reor
the like.
• Apparatus shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
apparatus(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•Never remove the casing of this apparatus.
•Never place this apparatus on other electrical
equipment.
•Keep this device away from direct sunlight, naked
amesorheat.
•Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
4
English
EN
2 Your Docking
Speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, and other external audio
devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC power adaptor
• Quick start guide
•
5EN
Overview of the main unit
a DBB
• Switch on/off Dynamic Bass Boost.
b Dock for the iPod/iPhone.
c ON/OFF
• Switch on/off the docking speaker.
d - VOLUME +
• Adjust volume.
e DC IN
• Connect power.
f AUX IN
• Connect an external audio device.
g Battery compartment
h Stand foot
ad
c
h
g
e
f
b
6
English
EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1:AC power
Caution
•Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Option 2: Battery power
Caution
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Remove batteries if they are exhausted or will not be
used for a long time.
•Batteries contain chemical substances, so they should
be disposed of properly.
1 Open the battery compartment.
2 Insert4x1.5VAAbatterieswithcorrect
polarity(+/-)asindicated.
3 Close the battery compartment.
PUSH
7EN
Turn on
Switch the power button to ON position to
turn on the docking speaker.
» The LED indicator lights up.
Switch to standby mode
The docking speaker switches to economic
standby mode in the following situations:
• Thespeakerisidlefor15minuteswhen
powered by AC supply;
• The iPod/iPhone or external audio device
is disconnected when the speaker is
operated on batteries.
» The LED indicator lights off.
8
English
EN
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPodtouch(2nd,3rd,and4thgeneration)
• iPod classic
• iPodnano(1st,2nd,3rd,4th,5th,and6th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
Listen to the iPod/iPhone
Philips DockStudio app brings a suite of new
features to your docking speaker, including
Internet radio and a multi-function alarm clock.
To enjoy more features, you are recommended
to install this free application.
1 Switch the power button to ON position.
» The LED indicator lights up.
2 Insert the iPod/iPhone into the dock.
3 Forrst-timeuse,youwillbeaskedto
install DockStudio app on your iPod/
iPhone.
4 Tap [Yes] (yes)toaccepttheinstallation
request.
5 Follow the on-screen instructions to
complete the installation.
6 Launch the app after the installation.
7 Play audio on your iPod/iPhone.
» You can hear audio from this docking
speaker.
Charge the iPod/iPhone
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.
9EN
Play from an external audio
device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
•Make sure that no iPod/iPhone is docked in the docking
speaker.
1 ConnectanMP3linkcable(notsupplied)
to:
• the MP3-LINK socket at the back of
the docking speaker.
• the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
2 Play music on the device (see the device's
usermanual).
Adjust volume
During play, press - VOLUME + to adjust
volume.
Enrich sound output
During play, switch on DBB to enrich sound
output.
10
English
EN
5 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Total Output Power 2 x 5 W RMS
Signal to Noise Ratio >60 dBA
MP3 Link 0.6VRMS22
kohm
General information
AC Power Model:
S018KC0900200
Input:100-240V~
50/60Hz, 500mA;
Output:9V 2000 mA
Operation Power
Consumption <18W
Eco Standby Power
Consumption <0.5 W
Max. load for iPod/
iPhone 5V 1A
Dimensions
-MainUnit(WxHxD) 311x111x37.6mm
Weight
- Main Unit 0.28 kg
Inhaltsverzeichnis
Andere Philips Docking-Lautsprecher Handbücher
Philips
Philips Fidelio AS851 Bedienungsanleitung
Philips
Philips DS7650/10 Bedienungsanleitung
Philips
Philips AD330/93 Bedienungsanleitung
Philips
Philips SBD7000/10 Bedienungsanleitung
Philips
Philips Fidelio AS851 Bedienungsanleitung
Philips
Philips DS3000/93 Bedienungsanleitung
Philips
Philips DS9/10 Bedienungsanleitung
Philips
Philips DC910W/37 Bedienungsanleitung
Philips
Philips Fidelio AD7000W Bedienungsanleitung
Philips
Philips Fidelio DS8530 Bedienungsanleitung
Philips
Philips DS6600/10 Bedienungsanleitung
Philips
Philips Fidelio AS351 Bedienungsanleitung
Philips
Philips DS8550/93 Bedienungsanleitung
Philips
Philips AS111 Bedienungs- und Wartungsanleitung
Philips
Philips AD348/37 Bedienungsanleitung
Philips
Philips DS3600/85 Bedienungsanleitung
Philips
Philips DS7510/93 Bedienungsanleitung
Philips
Philips DC291/12 Bedienungsanleitung
Philips
Philips DS7700/77 Bedienungsanleitung
Philips
Philips DS3100/98 Bedienungsanleitung
