Philips QC5050/40 Bedienungsanleitung

Hairclipper

QC5050, QC5010

4203.000.5452.3.indd 1 12-03-2007 14:33:15

4203.000.5452.3.indd 2 12-03-2007 14:33:16

4203.000.5452.3.indd 3 12-03-2007 14:33:18

4203.000.5452.3.indd 4 12-03-2007 14:33:18

QC5050,QC5010

ENGLISH 6

ESPAÑOL 12

FRANÇAIS (CANADA) 18

4203.000.5452.3.indd 5 12-03-2007 14:33:19

Introduction

Dear customer, you have made the right choice!Your new Philips super-

easy hair clipper adapts to the contours of the head and enables

comfortable use.To enjoy using the hair clipper we advise you to read the

following information.

General description (Fig. 1)

ASmall comb

BMain cutting element

COn/off slide

DLength indicator

ELength lock (locks the hair length setting)

FCleaning brush

GAdapter

HAppliance plug

IScissors (QC5050 only)

JStyling comb (QC5050 only)

Important

Read this user manual carefully before you use the appliance and save

it for future reference.

Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

Keep the appliance and the adapter dry (Fig. 2).

ENGLISH6

4203.000.5452.3.indd 6 12-03-2007 14:33:20

Use, charge and store the appliance at a temperature between 15°C

and 35°C.

This appliance is suitable for mains voltages from 220 to 240 volts.

Do not use a damaged adapter.

Do not use the appliance when one of the attachments is damaged

or broken as this may cause injury.

Only use the adapter supplied.

This appliance is only intended for clipping human scalp hair. Do not

use it for another purpose.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards regarding

electromagnetic elds (EMF). If handled properly and according to the

instructions in this user manual, the appliance is safe to use based on

scientic evidence available today.

Charging (QC5050 only)

Charge the appliance for 8 hours (NiCd battery) or 12 hours (NiMh

battery) before you start using it for the rst time.

A fully charged appliance has a cordless clipping time of up to 35 minutes

(NiCd battery) or 50 minutes (NiMh battery).

Do not charge the appliance for more than 24 hours.

1 Make sure the appliance is switched off while charging.

2 Insert the appliance plug into the appliance (Fig. 3).

3 Insert the adapter into the wall socket.

The charging light will go on to indicate that the appliance is

charging (Fig. 4).

The charging light will not go out or change colour when the appliance

is fully charged.

Optimising the lifetime of the battery

After the appliance has been charged for the rst time, do not recharge it

between clipping sessions. Continue using it and recharge it only when

the battery is (almost) empty.

ENGLISH 7

4203.000.5452.3.indd 7 12-03-2007 14:33:21

Discharge the battery completely twice a year by letting the motor

run until it stops.

Do not keep the appliance plugged into a wall socket all the time.

If the appliance has not been used for a long time, it must be

recharged for 8 hours (NiCd battery) or 12 hours (NiMh battery).

Corded clipping

QC5050 only:

Do not run the appliance from the mains when the battery is fully

charged.

To use the hair clipper connected to the mains: switch the hair

clipper off, connect it to the mains and wait a few seconds before

switching it on.

QC5010 only:

1 Insert the appliance plug into the appliance. (Fig. 3)

2 Insert the adapter into the wall socket.

Using the appliance

Clipping with comb attachment

The hair length after cutting is indicated in millimetres on the

display.The settings correspond to the remaining hair length after

cutting.

The hair length after cutting is only visible when the comb is

attached.

1 Slide the comb attachment into the guiding grooves of the

appliance (‘click’). (Fig. 5)

Make sure that the arms of the comb attachment have been properly slid

into the grooves on both sides.

2 Set the comb to the desired hair length (3, 6, 9, 12, 15, 18 or

21 millimetres) by turning the length lock (Fig. 6).

3 Switch the appliance on (Fig. 7).

ENGLISH8

4203.000.5452.3.indd 8 12-03-2007 14:33:21

Tips

We advise you to start clipping at the highest setting and to reduce

the hair length in small steps until you reach the desired hair length.

If a lot of hair has accumulated in the comb, remove the comb

attachment and blow and/or shake the hair from the comb. Removing

the comb does not change the selected hair length setting.

Write down the hair length settings used to create a certain hairstyle

as a reminder for future clipping sessions.

Clipping without comb attachment:

You can use the clipper without comb attachment to contour the

neckline and the area around the ears.

Remove the comb attachment by pulling it off the appliance (Fig. 8).

Never pull at the exible top of the comb attachment. Always pull at the

bottom part.

The comb attachment keeps the cutting unit at a certain distance

from your head.This means that, if you use the clipper without the

comb attachment, your hair will be cut off very close to the skin.

Cleaning

Clean the appliance every time you have used it.

Do not use abrasives, scourers or liquids such as alcohol, petrol or

acetone to clean the appliance.

The appliance and the adapter may only be cleaned with the brush

supplied.

1 Make sure the appliance is switched off and disconnected from the

mains when you start cleaning it.

2 Remove the comb attachment by pulling it off the appliance (Fig. 8).

3 Push the middle part of the cutting unit upwards with your thumb

until it opens and then pull it off the appliance (Fig. 9).

Be careful that the cutting unit does not fall to the oor.

4 Clean the cutting unit with the brush supplied (Fig. 10).

ENGLISH 9

4203.000.5452.3.indd 9 12-03-2007 14:33:22

5 Also clean the inside of the appliance with the brush

supplied (Fig. 11).

6 Place the lug of the cutting unit into the slot and push the unit back

onto the appliance (‘click’) (Fig. 12).

This appliance does not need any lubrication.

Replacement

A worn or damaged cutting unit should only be replaced with an original

Philips cutting unit.

Push the middle part of the cutting unit upwards with your thumb

until it opens and then pull it off the appliance (Fig. 9).

Be careful that the cutting unit does not fall to the oor.

Place the lug of the new cutting unit into the slot and push the unit

back onto the appliance (‘click’) (Fig. 12).

Environment (QC5050 only)

Do not throw the appliance away with the normal household waste

at the end of its life, but hand it in at an ofcial collection point for

recycling. By doing this you will help to preserve the

environment (Fig. 13).

The built-in rechargeable battery contains substances that may pollute

the environment.Always remove the battery before discarding the

appliance or handing it in at an ofcial collection point. Dispose of the

battery at an ofcial collection point for batteries. If you have trouble

removing the battery, you can also take the appliance to a Philips service

centre, which will remove the battery for you and will dispose of it in an

environmentally safe way.

Disposal of the battery

Only remove the battery if it is completely empty.

1 Disconnect the appliance from the mains and let the appliance run

until the motor stops.

2 Push the middle part of the cutting unit upwards with your thumb

until it opens and then pull it off the appliance (Fig. 9).

ENGLISH10

4203.000.5452.3.indd 10 12-03-2007 14:33:22

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Haarschneider Handbücher

Philips

Philips QC5380 Bedienungsanleitung

Philips

Philips Norelco HC7452 Bedienungsanleitung

Philips

Philips HC5450 Bedienungsanleitung

Philips

Philips AC3259 Bedienungsanleitung

Philips

Philips HairClipper HC5440/15 Bedienungsanleitung

Philips

Philips QC5132 Bedienungsanleitung

Philips

Philips QC5015 Bedienungsanleitung

Philips

Philips 3000 series Bedienungsanleitung

Philips

Philips QC5390/15 Bedienungsanleitung

Philips

Philips HQC688/60 Bedienungsanleitung

Philips

Philips QC5040 Bedienungsanleitung

Philips

Philips QC5380 Bedienungsanleitung

Philips

Philips HC7450/80 Bedienungsanleitung

Philips

Philips QC5390 Bedienungsanleitung

Philips

Philips HC5691 Bedienungsanleitung

Philips

Philips QC5041/60 Bedienungsanleitung

Philips

Philips Philishave HQC488/61 Bedienungsanleitung

Philips

Philips HQC486 Handbuch

Philips

Philips HC5450 Bedienungsanleitung

Philips

Philips BT5270 Bedienungsanleitung

Philips

Philips BT1005 Bedienungsanleitung

Philips

Philips QT4090 Bedienungsanleitung

Philips

Philips HC9450/20 Bedienungsanleitung

Philips

Philips CC 5065 Bedienungsanleitung

Beliebte Haarschneider Handbücher anderer Marken

Clatronic

Clatronic HSM 800 Bedienungsanleitung

Mellerware

Mellerware MACRO ALDANY MA20001 Bedienungsanleitung

VALERA

VALERA X-Master 652 Bedienungsanleitung

Wahl

Wahl 1870Li Bedienungsanleitung

Remington

Remington HC5780 Bedienungsanleitung

Lister

Lister Legend Bedienungsanleitung

Andis

Andis MBA 23125 Bedienungsanleitung

Shear Magic

Shear Magic Nifty 1800 Bedienungsanleitung

Andis

Andis US-1 Kurzanleitung

Panasonic

Panasonic EH-KA81 Bedienungsanleitung

Andis

Andis US-1 Montageanleitung

Remington

Remington Classic HC450 Bedienungsanleitung

Andis

Andis ML Montageanleitung

O'Barber

O'Barber MINI SLIDE Bedienungsanleitung

Oster

Oster 76110 Bedienungsanleitung

Hyundai

Hyundai HC 420 Bedienungsanleitung

Panasonic

Panasonic ER-GP80 Bedienungsanleitung

Eldom

Eldom MG8 Bedienungsanleitung