Philips SHB9000 Bedienungsanleitung

www.philips.com/welcome

GB Bluetooth stereo headset

SHB9000

Table of contents

1  Important 3

1.1 Hearing safety 3

1.2 Electric-, Magnetic- and Electromagnetic

Fields (“EMF”) 3

1.3 General maintenance 4

1.4 Disposal of your old product 4

1.5 Remove the integrated battery 4

1.6 Notice for the European Union 5

1.7 Trademarks 5

2  inthebox 6

3  Whatelse need 6

4  Whatyoucandowith

yourheadset 6

5  Overviewofyour

Bluetoothstereoheadset 7

6  Getstarted 8

6.1 Charge your headset 8

6.2 Pair your headset with your

mobile phone 8

7  Usingyour

  Bluetoothstereoheadset 10

7.1 Connecting to your mobile phone 10

7.2 Automatic power saving 10

7.3 Operating your headset 10

7.4 Wearing your

Bluetooth stereo headset 12

8  Usingmoreofyour

  Bluetoothstereoheadset 13

8.1 Use with the audio cable 13

8.2 Learn about the battery status 13

8.3 Learn about simultaneous use for

voice and audio 14

8.4 Learn about FullSound 14

9Technicaldata 15

10  Frequentlyaskedquestions 16

ENGLISH

1 Important

1.1  Hearingsafety

Danger

To avoid hearing damage limit the time you use

the headphones at high volume and set the

volume to a safe level.The louder the volume

the shorter is the safe listening time.

Be sure to observe the following

guidelines when using your headphones.

• Listen at reasonable volumes for reasonable

periods of time.

• Be careful not to adjust the volume

continuously upwards as your hearing adapts.

• Do not turn up the volume so high that you

can’t hear what’s around you.

• You should use caution or temporarily

discontinue use in potentially hazardous

situations.

• Using this headset with both ears covered

while driving is not recommended and may

be illegal in some areas while driving.

• For your safety avoid distractions from

music or phone calls while in trafﬁc or other

potentially dangerous environments.

1.2  Electric-,Magnetic-and

   ElectromagneticFields( EMF )

Philips Electronics manufactures and sells

many products targeted at consumers, which,

like any electronic apparatus, in general

have the ability to emit and receive electro

magnetic signals.

One of Philips leading Business Principles

is to take all necessary health and safety

measures for our products, to comply with

all applicable legal requirements and to stay

well within the EMF standards applicable at

the time of producing the products.

Philips is committed to develop, produce

and market products that cause no adverse

health effects.

Philips conﬁrms that if its products are

handled properly for their intended use,

they are safe to use according to scientiﬁc

evidence available today.

Philips plays an active role in the

development of international EMF and safety

standards, enabling Philips to anticipate

further developments in standardization for

early integration in its products.

1.3  Generalmaintenance

Toavoiddamageormalfunction:

• Do not expose the headset to excessive heat.

• Do not drop your headset.

• Do not allow your headset to be submerged

in water.

• Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives.

If cleaning is required use a soft cloth, if

necessary dampened with a minimum amount

of water or diluted mild soap, to clean the

product.

Aboutoperatingandstorage

temperatures

• Do not operate or store in a place where

temperature is below -15ºC (5ºF) or above

55ºC (131ºF) as this may shorten your

battery life.

1.4  Disposalofyouroldproduct

Your product is designed and

manufactured with high quality

materials and components, which can

be recycled and reused.

When this crossed-out wheeled bin symbol is

attached to a product, it means the product is

covered by the European Directive 2002/96/EC.

Please be informed about the local separate

collection system for electrical and electronic

products.

Please act according to your local rules and

do not dispose of your old product with your

normal household waste.The correct disposal

of your old product will help prevent potential

negative consequences to the environment and

human health.

1.5  Removetheintegratedbattery

If in your country there is no collection /

recycling system for electronic products you

can protect the environment by removing

and recycling the battery before disposing the

headset. Please take the battery to a battery

collection and recycling location.

Removing the battery will destroy the product.

Make sure the headset is disconnected from the

USB charging cable before removing the battery.

You can remove the battery by completing the

following steps.

1Tear off the ear cushion of the left earshell.

2Remove the screws that hold the speaker

plate in place.

3Remove the speaker plate.

4Cut the battery wires.

5Remove the battery.

ENGLISH

1.6  NoticefortheEuropeanUnion

Hereby, Philips Consumer Lifestyle, BG P&A,

declares that this Philips Bluetooth headset

SHB9000 is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

Check the root folder of your user manual CD

or an addendum sheet for the Declaration of

Conformity.

1.7  Trademarks

Trademarks are the property of Koninklijke

Philips Electronics N.V. or their respective

owners.The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any use

of such marks by Koninklijke Philips Electronics

N.V. is under license.

3 What else you’ll need:

A mobile phone that is capable of Bluetooth

stereo streaming, i.e. that is compatible with the

Bluetooth A2DP proﬁle.

Other devices (Notebooks, PDA’s, Bluetooth

adapters, MP3 players etc.) are also compatible if

they share the Bluetooth proﬁles supported by

the headset.These proﬁles are:

Forwirelesshandsfreecommunication:

• The Bluetooth headset proﬁle (HSP) or the

Bluetooth Handsfree proﬁle (HFP).

Forwirelessstereolistening:

• The Bluetooth Advanced Audio Distribution

proﬁle (A2DP).

Forwirelessmusiccontrol:

• The Bluetooth Audio Video Remote Control

proﬁle (AVRCP).

The headset features Bluetooth Version 2.0

but will also work with devices featuring other

Bluetooth versions that support the proﬁles

above.

4 What you can do with

your headset

WithyourPhilipsheadsetyoucan:

• Lead wireless hands-free conversations

• Wirelessly listen to music

• Wirelessly control music

• Switch between calls and music

• Listen to music on devices without Bluetooth

support using the included audio cable

2 What’s in the box:

USB charging cableBluetooth headset CD with user manual

Audio cable

SHB9000

Pouch

Quick start guide

ENGLISH

5 Overview of your Bluetooth stereo headset

LED

indicator

light

Adjustable

headband

Audio jack

Microphone

Mini USB

charging jack

6 Get started

6.1  Chargeyourheadset

Before you use your headset for the ﬁrst time,

charge the battery for 6 hours for optimum

battery capacity and lifetime.

Warning

Use only the original USB charging cable. Using

another charger may damage or destroy your

headset.

Plug the USB charging cable into your

computers USB socket and connect the charger

cable to the headsets charging socket.

Caution

Finish your call before charging the headset, as

connecting the headset for charging will cut an

ongoing call.

During recharging the LED indicator will show

a red light.The LED will turn off once charging

is complete.Typically a full charge will take

four hours.You can operate the headset during

charging.

6.2  Pairyourheadsetwithyourmobile

phone

Your Bluetooth stereo headset must be paired

to your mobile phone before connecting and

using it for the ﬁrst time with your phone.

“Pairing” will establish a unique encrypted link

between your mobile phone and your headset.

Pairinghastobedone

• before using your headset with your mobile

phone for the very ﬁrst time, or

• after pairing more than 2 Bluetooth devices

with your headset. Your headset can store up

to 2 paired devices in its memory, if you pair

more than 2 devices the oldest paired device

is overwritten.

• “Pairing” is different from “connecting” as

pairing typically only has to be done once,

whereas the phone and headset need to

“connect” every time one of the two devices

was turned off or out of range.

ENGLISH

Topairyourheadsetwithyour

mobilephone

Make sure the headset is charged, your mobile

phone is turned on and its Bluetooth feature is

enabled. Check your phones user guide to learn

how to turn on Bluetooth on your phone.

1With the headset turned off, press

until the LED starts blinking red and blue

alternately. The headset will remain in

“pairing mode” for 5 minutes.

2Pairing typically involves a few simple steps

outlined below, please check your phones

user guide for details.

3Access a menu on your mobile phone

typically called “Setup”,“Settings”,

“Bluetooth” or “Connectivity”. Select the

option to discover or search for Bluetooth

devices. After a few seconds your phone

should indicate that it has found the “Philips

SHB9000”.

4Upon selecting the “Philips SHB9000” on

your mobile phone typically you will need

to conﬁrm the pairing and enter a passcode.

Please enter the headsets passcode “0000”

(four zeros).

After successful pairing, the headset will connect

to the mobile phone.You will hear a long beep

to conﬁrm successful pairing and the headsets

LED will change from ﬂashing red/blue to

periodically ﬂashing blue every three seconds.

Settings

Bluetooth

Select Back

Connectivity

10:35

Add

Bluetooth

device

Settings

Select Back

Connectivity

10:37

Enter Password

****

0000

Settings

Devices Found

Select Back

10:36

Philips SHB9000

7 Using your Bluetooth

stereo headset

7.1  Connectingtoyourmobilephone

Turn on the headset by pressing until the LED

lights up. Once turned on the headset will re-

connect automatically to the last device it was

connected with. If the last connected device is

not available the headset tries to reconnect to

the penultimate device that was connected to

the headset.

If you turn the mobile phone or its Bluetooth

feature on after turning on the headset connect

the headset from your mobile phones Bluetooth

menu.

7.2  Automaticpowersaving

If your headset cannot ﬁnd any Bluetooth device

to connect to in range within five minutes it will

automatically power down to save battery life.

7.3  Operatingyourheadset

To control the headset you

tap, hold and double tap the

headsets buttons. A “tap”,

“hold” and “double tap”

differs in the duration and

speed of the button press.

1 sec

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Headset Handbücher

Philips

Philips SHM6105 - Headset - Behind-the-neck Bedienungsanleitung

Philips

Philips SHB6102 Bedienungsanleitung

Philips

Philips SHB1300/05 Bedienungsanleitung

Philips

Philips BREEZE SWB9000/00 Bedienungsanleitung

Philips

Philips SHB1200 Bedienungsanleitung

Philips

Philips SHB7100/27 Bedienungsanleitung

Philips

Philips SHH8107/28 Bedienungsanleitung

Philips

Philips shb1700 Bedienungsanleitung

Philips

Philips SHB9100/00 Bedienungsanleitung

Philips

Philips SHM2000/00 Bedienungsanleitung

Philips

Philips SHI1603 Bedienungsanleitung

Philips

Philips SHB7100 Bedienungsanleitung

Philips

Philips SHB7110/10 Bedienungsanleitung

Philips

Philips SHH8006/28 Bedienungsanleitung

Philips

Philips SHM1900 Bedienungsanleitung

Philips

Philips SHM6110U Bedienungsanleitung

Philips

Philips SHB7100/00 Bedienungsanleitung

Philips

Philips SHE8005/00 Bedienungsanleitung

Philips

Philips SHB1400 Bedienungsanleitung

Philips

Philips SHB7100 Bedienungsanleitung

Philips

Philips SHM6103 Bedienungsanleitung

Philips

Philips SHQ3017 Bedienungsanleitung

Philips

Philips SHB6111/10 Bedienungsanleitung

Philips

Philips VOX150 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung