Philips Azur GC4040 Bedienungsanleitung

Azur GC4040,4035,4030,4025,4020,4015,4010,4005

ENGLISH 4

POLSKI 11

ROMÂNĂ 18

РУССКИЙ 25

ČESKY 33

MAGYAR 39

SLOVENSKY 46

УКРАЇНСЬКА 53

HRVATSKI 61

EESTI 68

LATVISKI 75

LIETUVIŠKAI 82

SLOVENŠČINA 89

GC4000

Important

For optimal safety,first read these instructions before you are going to

use the iron:

- The user must not leave the iron unattended while it is connected to

the supply.

- This appliance is not intended for use by young children without

supervision.

- Young children should be supervised to ensure that they do not play

with the appliance.

- The soleplate of the iron can become extremely hot and may cause

burns if touched.

- Never use the appliance if it is damaged in any way.

- After finished ironing,during filling or emptying the water tank or

even when you leave the iron for a while,unplug from the wall

socket,set the steam control to position 0 and put the iron on its

heel.

- If the supply cord is damaged,it must be replaced by a special cord

or assembly available from Philips or its service agent.

Before first use

1Check if the voltage rating on the typeplate corresponds to the

mains supply in your home.

C2Remove any sticker,protective foil or storage cover (Type

GC4040/4025 only) from the soleplate.

3Heat up the iron to maximum temperature and iron over a

piece of damp cloth for several minutes to remove any residue

on the soleplate.

The iron may give out some smoke when using it for the first time.

After a short while this will cease.

Filling the water tank

Do not immerse the iron in water.

1Remove the mains plug from the wall socket.

C2Set the steam control to position O (= no steam).

3Open the filling cap.

4Hold the iron in a tilted position.

ENGLISH4

C5Pour tap water from the filling jug into the water tank up to

the maximum level.

Do not fill the tank beyond the MAX indication.

If the tap water in your area is very hard,we advise you to mix it with

an equal portion of distilled water,or to use distilled water only.

Do not use vinegar,starch or chemically descaled water.

6Press to close the filling cap (click!).

Setting the temperature

C1(Type GC4040,4025 only).Remove the protective storage

cover.

Do not use the cover during ironing.

2Put the iron on its heel.

C3Set the temperature control to the required ironing

temperature by turning it to the position of the temperature

indicator.

- Check the garment label for the required ironing temperature.

-1Synthetic fabrics (e.g.acrylic,viscose,polyamide,polyester)

-1Silk

-2Wool

-3Cotton,linen

- When you do not know what kind of fabric(s) the article is made of,

try to iron on a spot which will be invisible when you wear it.

- Silk,woolen and synthetic materials: iron the reverse side of the

fabric to prevent shiny spots.To prevent stains,avoid using the spray

function.

- Start ironing the articles that require the lowest ironing temperature,

such as those made of synthetic fibers.

4Put the mains plug in an earthed wall socket.

C5When the amber temperature pilot light has first gone out,

wait for a while before start ironing.

BThe amber pilot light will come on from time to time during ironing.

ForAuto-shut-off versions

(Type GC4040/4035/4030 only)

If the Auto-shut-off is activated (red pilot light blinks),move the iron

slightly to deactivate it (blinking stops).

ENGLISH 5

Steam-ironing

Make sure that there is enough water in the water tank.

1Set the temperature control to the recommended position.

See section 'Setting the temperature'.

C2Set the steam control to the appropriate steam position.

- 1 - 3 for moderate steam (temperature settings 2to 3)

- 4 - 6 for maximum steam (temperature settings 3to MAX)

BSteaming will start as soon as the set temperature has been reached.

Ironing without steam

1Set the steam control to position O (= no steam).

2Set the temperature control to the recommended position.

See section 'Setting the temperature'.

Other features

Spraying

To remove stubborn creases at any temperature.

Make sure that there is enough water in the water tank.

C1Press the spray button a couple of times to moisten the

laundry.

Shot of Steam

A powerful "shot" of steam helps remove stubborn creases.

The Shot-of-Steam function can only be used at temperature settings

between 2and MAX.

C1Press and release the Shot-of-Steam button.

Drip Stop

This iron features a "Drip Stop" steam shut-off facility:the iron

automatically stops steaming at too low temperatures to prevent water

from dripping out of the soleplate.When this happens you may hear a

sound.

ENGLISH6

Vertical Shot of Steam

(Type GC4040/4035/4030/4025/4020/4015/4010 only)

C1The Shot of Steam function can also be used when you hold

the iron in vertical position.

Never direct the steam towards people.

AutomaticAnti-Calc system

(Type GC4040/4035/4030/4025/4020/4015 only)

C1The built-inAnti-Calc system automatically reduces deposit of

scale and ensures a longer life of the iron.

Auto-shut-off

(Type GC4040/4035/4030 only)

C1An electronic safety device will automatically switch off the

iron if it has not been moved for a while.

◗To indicate that the iron has been switched off,the red auto-off

pilot light will start blinking.

To heat up the iron again:

- Pick up the iron or move it slightly.

-The red auto-off pilot light will go out.The amber temperature pilot

light may come on,depending on the soleplate temperature.

- If the amber pilot light comes on after the iron is moved,wait for it to

go out before start ironing.

- If the amber pilot light does not come on after the iron is moved,the

iron is ready for use.

ENGLISH 7

Cleaning and maintenance

Calc-Clean

This is a Calc-Cleaning function which removes scale and impurities.

Use the Calc-Clean function once every two weeks. If the water in

your area is very hard (when flakes coming out from the soleplate

during ironing),the Calc-Clean function should be used more

frequently.

1Set the steam control to position O.

2Fill the water tank to the maximum level.

Do not use vinegar or other descaling agents.

C3Set the temperature control to MAX.

4Put the plug in the wall socket.

5Unplug the iron when the amber pilot light has gone out.

C6Hold the iron over the sink,press and hold the calc-clean

button and gently shake the iron.

BSteam and boiling water will come out of the soleplate.Impurities and

flakes (if any) will be flushed out.

7Release the Calc-Clean button as soon as all the water in the

tank has been used up.

Repeat the calc-cleaning process if the iron still contains a lot of

impurities.

After calc-cleaning

- Plug in the iron to let the soleplate dry up.

- Unplug the iron when the amber pilot light has gone out.

- Move the hot iron gently over a piece of used cloth to remove any

water stains that may have formed on the soleplate.

- Let the iron cool down before you store it.

After ironing

1Remove the mains plug from the wall socket and let the iron

cool down.

2Wipe flakes and any other deposits off the soleplate with a

damp cloth and a non-abrasive (liquid) cleaner.

3Clean the upper part of the iron with a damp cloth.

ENGLISH8

C4Regularly rinse the water tank with water.Empty the water

tank after cleaning.

Storage

1Remove the mains plug from the wall socket and set the steam

control to position 0.

2Empty the water tank.

C3Type GC4035/4030/4020/4015/4010/4005 only.

a) Let the iron cool down.Wind the mains cord around the cord

storage facility and fix it with the cord clip.Type GC4040 comes with a

3m cord.

b) Always store the emptied iron horizontally on a stable surface and

use a cloth to protect the soleplate.

C4Protective storage cover (Type GC4040/4025 only).

a) Put the protective storage cover on the iron.

Do not use the protective storage cover during ironing.

b)Wind the mains cord around the cord storage facility.

c) Store the iron with the protective storage cover horizontally on a

stable surface.

Guarantee & service

If you need information or if you have a problem,please visit the Philips

Web site at www.philips.com or contact the Philips Customer Care

Centre in your country (you will find its phone number in the

worldwide guarantee leaflet).If there is no Customer Care Centre in

your country,turn to your local Philips dealer or contact the Service

Department of Philips Domestic Appliances and Personal Care BV.

ENGLISH 9

Trouble shooting guide

This chapter summarizes the most common problems you could

encounter with your iron.Please read the different sections for more

details.If you are unable to solve the problem,please contact the

nearest Philips Service Centre or one of its representatives.See the

worldwide guarantee leaflet for telephone numbers of the Philips

Helpdesk or visit our website at www.philipsonline.com.

ENGLISH10

Solution

Check the mains cord,the plug and

the wall socket.

Fill the water tank (see Filling the

water tank).

Set to steam position between 1-6

(see Steam ironing).

Set the temperature control to the

steam area (2to MAX).Put the

iron on its heel and wait until the

amber pilot light has gone out before

you start ironing.

Put the iron in horizontal position and

wait for a while before using the

(Vertical) Shot of Steam function

again.

Set the temperature control to the

steam area (2to MAX).Put the

iron on its heel and wait until the

amber pilot light has gone out before

you start ironing.

Press to close the filling cap tightly

until you hear a click.

Apply Calc-Clean a few times (see

Calc-Clean).

Shake the iron slightly to deactivate

the Auto-shut-off,the lamp will stop

blinking.

Possible cause(s)

Connection problem.

Not enough water in the water tank.

The steam control has been set to

position O.

The iron is not hot enough and/or

Drip Stop is activated.

The (Vertical) Shot of Steam function

has been used too often within a very

short period.

The iron is not hot enough and/or

Drip Stop is activated.

The filling cap is not closed properly.

Hard water form flakes inside the

soleplate.

Auto-shut-off is activated.See "Auto-

shut-off" section.

Problem

The iron is plugged in but the

soleplate is cold.

No steam.

No Shot of Steam or NoVertical

Shot of Steam (Type

GC4040/4035/4025/4020/4015/4010

only).

Water droplets on fabric.

Flakes and impurities coming out

from soleplate during ironing.

Red pilot light blinks (Type

GC4040/4035/4030 only).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Eisen Handbücher

Philips

Philips 8000 Series Bedienungsanleitung

Philips

Philips GC8700 series Bedienungsanleitung

Philips

Philips PerfectCare 8000 Series Bedienungsanleitung

Philips

Philips HD1172/00 Bedienungsanleitung

Philips

Philips GC4880/20 Bedienungsanleitung

Philips

Philips Azur Pro GC4881/80 Bedienungsanleitung

Philips

Philips GC8260 Bedienungsanleitung

Philips

Philips PerfectCare Elite Plus GC9681/81 Bedienungsanleitung

Philips

Philips GC6320 Bedienungsanleitung

Philips

Philips GC8712/21 Bedienungsanleitung

Philips

Philips Insta Press GC9500 Bedienungsanleitung

Philips

Philips GC4930/10 Bedienungsanleitung

Philips

Philips GC4516/40 Bedienungsanleitung

Philips

Philips GC9410 Bedienungsanleitung

Philips

Philips GC8350/02 Bedienungsanleitung

Philips

Philips EasySpeed GC1017 Series Bedienungsanleitung

Philips

Philips Mistral GC2105 Bedienungsanleitung

Philips

Philips GC6603/21 Bedienungsanleitung

Philips

Philips ComfortCare GC 2710 Bedienungsanleitung

Philips

Philips GC4800 series Bedienungsanleitung

Philips

Philips Azur Excel Plus HI 528 Bedienungsanleitung

Philips

Philips GC650 SERIES Bedienungsanleitung

Philips

Philips Mistral GC2425 Bedienungsanleitung

Philips

Philips GC6420 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

GE 169061 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 GC Bedienungsanleitung

AEG

AEG DBS 5591 Bedienungsanleitung