Philips GC3640 Bedienungsanleitung

ServiceManual

Philips Consumer Lifestyle

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification

Steam Iron Energy Care

GC3640

10/06

PRODUCT INFORMATION

Features

- Automatic energy saving

- Steam Gide soleplate

- Steam rate 35 g/min

- Steam boost 100 g/min

- Water tank capacity 300 ml

- Extra long cord 3 m

- Double active anti-calc system

- Drip stop system

- Soft touch handle

- Steam tip

Safety Information

- This product meets the requirements regarding

interference suppression on radio & TV.

- After the product has been repaired, it should function

properly & has to meet the safety requirements as

officially laid down at this moment.

TECHNICAL INFORMATION

Voltage : 120 V, 230 V

Frequency : 50 - 60 Hz

Power : 1300 W, 2200 W

Dimension (F-box) : 130 mm x 335 mm x 168 mm

(Depth x Width x Height)

Net weight : 1.59 kg

Water advice

In case you live in an area with hard water (e.g. water hardness

more than 8 dGH), it is recommended to use a mixture of

50 % tap water and 50 % demineralised water.

Automatic energy saving

90 % of the energy a steam iron uses is used to convert water

into steam. This steam iron with innovative mechanism

in the handle makes sure that you still get high steam

performance, but with optimal use of energy.

The automatic energy saving technology is such that

- when you put the iron down on the garment and press the

handle gently (which you normally do during ironing!), it

steams at full power.

- when you lift the iron, the steaming reduces to a minimum.

Steam Glide soleplate

This specially treated soleplate is designed with 2 distinctly

different types of steam vents:

- Large vents for maximum crease removal

- Fine vents for best glide

Double active anti-calc system

Anti-calc cassette inside water tank & calc cleaning feature

provide double protection against scale build-up.

Calc clean is integrated with steam control.

GC3640

BACKPLATE SCREW COVER 25

BACKPLATE MOULDED 8

Disassemble BACKPLATE SCREW COVER 25

Remove screw A

Disassemble BACKPLATE MOULDED 8

INLAY COVER MOULDED 26

INLAY MOULDED 19

Disassemble INLAY COVER MOULDED 26

Remove screw B1, B2

Disengage rear catch of INLAY MOULDED 19

Disassemble INLAY MOULDED 19

DISASSEMBLY ADVICE

FILLING DOOR ASSY 24

SUB-INLAY PRINTED 22

WATER TANK & HOUSING

ASSY 11

SWIVEL MOULDED 7

CORDSET 9

Disassemble FILLING DOOR ASSY 24

Remove screw C

Disassemble SUB-INLAY PRINTED 22

Disassemble TANK TOP SEAL 17

Remove screw D1, D2, D3

Disassemble WATER TANK & HOUSING ASSY 11

Disengage quick-connectors of CORDSET 9

Remove screw E1, E2

Disassemble swivel column

Disassemble SWIVEL MOULDED 7

Disassemble CORDSET 9

COVER ASSY 5

SOLEPLATE MOUNTED ASSY 1

Remove screw F1, F2, F3

Disassemble THERMOSTAT BUSH 10

Disassemble COVER ASSY 5

Disassemble SOLEPLATE MOUNTED ASSY 1

2-5

GC3640

REPAIR INSTRUCTIONS

- Due to the high wattage of the iron, only the specified cord set must be used.

- Should damage be observed on the CORDSET 9, it must be replaced.

Continued usage is not allowed.

- For standardization reason, the COVER ASSY 5 is provided without type plate information eg. type number, voltage etc. When

replacing the cover, engrave the type number & voltage on the type plate with a sharp object.

- After the product has been repaired, it should function properly and has to meet the safety requirements & legal regulations as

laid down & officially established at this moment.

- The following tests are common checks that are conducted on a repaired product before it is returned to the consumer.

1. Soleplate temperature

Check that soleplate temperature is within IEC requirement.

Measure the temperature of the soleplate after the iron has reached steady state i.e connected to the mains for at least 15 minutes.

The table below shows the temperature requirement.

Marking

Soleplate temperature (Deg C)

Material, for example

Test-

point

Minimum Maximum Nominal + Tolerance

•(1 dot) 70 120 95 ± 25 Acetate, elastane, polyamide, polyproylene

•• (2 dots) 100 160 130 ± 30 Cupro, polyester, silk, triacetate, viscose, wool

••• (3 dots) 140 210 175 ± 35 Cotton, linen

2. Leakage current

Check that leakage current is within IEC requirement.

Measure leakage current between LIVE/NEUTRAL & EARTH.

IEC requirement is that at 230 V supply, the EARTH leakage current must be less than 0.75 mA.

3. Water leakage / Functionality

Check that there is no water leakage from any part of the product during operation.

Check that the functionality of the product (product dependent) eg. steaming, variable steam, SOS, ASO etc is working properly.

4. Loose part

Check that there are no loose parts eg. extra screw in the product that can cause short-circuit or product malfunction.

3-5

GC3640

PARTS LIST & ELECTRICAL DIAGRAM

RESISTOR

LAMP

FUSE

HEATING

UNIT

INPUT

THERMOSTAT

4-5

Pos Service code Description

4239 021 39870

4239 015 54410

4239 025 98250

4239 015 55920

4239 021 53140

4239 010 11290

4239 026 36980

4239 026 37230

4239 000 07760

4239 000 09802

4239 026 13220

4239 021 53590

4239 021 57931

4239 015 55800

4239 021 54550

4239 021 54701

4239 026 36850

4239 026 34920

4239 026 34930

4239 021 54921

4239 021 53160

4239 026 36890

4239 026 36930

4239 026 10270

Soleplate mounted assy 230 V / 2200 W

SOS seal

Ryton spacer

Dosing seal

Cover assy

Heat shield

Swivel moulded

Backplate moulded

Cord set EU

Cord set Singapore / Hong Kong

Thermostat bush

Water tank & housing assy

Water tank & housing assy - Singapore

Tank top seal

Thermostat dial printed

Thermostat dial printed - Eng text

Inlay moulded

Spray knob moulded

SOS knob molulded

Sub-inlay printed & Steam slider assy

Filling door assy

Backplate screw cover

Inlay cover moulded

Filling cup

= changed

GC3640

EXPLODED VIEW

MAX

Swivel

column

5-5

Inhaltsverzeichnis

Andere Philips Eisen Handbücher

Philips

Philips Azur GC4243 Bedienungsanleitung

Philips

Philips Azur 4800 GC4845 Bedienungsanleitung

Philips

Philips GC1409 Bedienungsanleitung

Philips

Philips Azur Freemotion GC4590 Series Bedienungsanleitung

Philips

Philips GC140 Series Bedienungsanleitung

Philips

Philips GC4890/02 Bedienungsanleitung

Philips

Philips Mistral GC2105 Bedienungsanleitung

Philips

Philips GC3620 Bedienungsanleitung

Philips

Philips 378003116 Bedienungsanleitung

Philips

Philips HI901/03 Bedienungsanleitung

Philips

Philips EasySpeed GC1029 series Bedienungsanleitung

Philips

Philips HI478/00 Bedienungsanleitung

Philips

Philips HI 915 Bedienungsanleitung

Philips

Philips HI 515/25 Bedienungsanleitung

Philips

Philips Intellicare GC7020 Bedienungsanleitung

Philips

Philips GC7330 Bedienungsanleitung

Philips

Philips PSG7050/30 Bedienungsanleitung

Philips

Philips GC7808/48 Bedienungsanleitung

Philips

Philips GC3670 Bedienungsanleitung

Philips

Philips GC4885/00 Bedienungsanleitung

Philips

Philips GC3500 series Bedienungsanleitung

Philips

Philips Mistral GC2030 Bedienungsanleitung

Philips

Philips FC7010 Bedienungsanleitung

Philips

Philips SpeedCare GC6625 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

GE 169061 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 GC Bedienungsanleitung

AEG

AEG DBS 5591 Bedienungsanleitung