Philips GC7600 series Bedienungsanleitung
Always here to help you
User manual
Register your product and get support at
www.philips.com/welcome
GC7600 series
1
GC7600 series
ENGLISH 6
FRANÇAIS 15
ITALIANO 24
PORTUGUÊS 33
ESPAÑOL 42
6
- ANTI-CALC: Important information:
- Replace the ANTI-CALC cartridge when the ANTI-CALC
replacement light ashes and the appliance beeps. If you do not, the
product will stop working to prevent damaging itself. You could either
replace the cartridge or use demineralised water with exhausted
cartridge.
- To purchase more ANTI-CALC cartridges, go to your local Philips
dealer or search for GC002 or GC004 in the online shop at
www.philips.com/shop.
General description (Fig. 4)
1 ANTI-CALC cartridge
2 ANTI-CALC cartridge compartment
3 ANTI-CALC cartridge compartment lid
4 Carry lock release button (specic types only)
5 Filling funnel lid
6 Water tank with water level indicator
7 Iron platform
8 Supply hose
9 Mains cord with plug
10 ANTI-CALC cartridge replacement light
11 On/off button with power-on light
12 ECO button with light
13 Soleplate
14 ’Iron ready’ light
15 Steam trigger/steam boost button
ENGLISH
Important
Read the separate important information leaet and the user manual carefully
before you use the appliance. Save both documents for future reference.
To fully benet from the support that Philips offers, register your product at
www.philips.com/welcome.
Before rst use - Placing the ANTI-CALC cartridge
Note:The appliance does not produce steam if the ANT-CALC cartridge is not
in place.
1 Pressthecarrylockreleasebutton(specictypesonly)andremove
the iron from the iron platform.
2 Open the ANTI-CALC cartridge compartment.
3 TaketheANTI-CALCcartridgeoutofitspackage(1)andpullthe
rubbercapfromitsbottom(2).PlacetheANTI-CALCcartridgein
thecompartmentandpressitdownuntilitlocksintoplace(3).Then
close the ANTI-CALC cartridge compartment lid.
Note: Some water droplets may fall out of the ANTI-CALC cartridge when you
place it into the compartment.This is normal and the water is harmless.
ENGLISH 7
Preparing for use
Filling the water tank
- Fill the water tank before every use or when the water level in the
water tank drops below the minimum level. You can rell the water
tank at any time during use.
- Make sure you only use one of the 3 types of water mentioned below
to ll the water tank:
1 Tap water
The ANTI-CALC cartridge lters scale particles from tap water. The scale
content in the ltered water is regularly monitored by an electronic sensor.
This sensor informs you when the cartridge needs to be replaced.
2 Demineralised water
You can safely use demineralised water in your steam generator. Make sure
that the ANTI-CALC cartridge is always in place, as the cartridge serves as
a link between the water tank and the iron. When you use demineralised
water, the ANTI-CALC cartridge is not used and therefore replacement of
the cartridge is not necessary.
3 Descaled water from the IronCare
The IronCare removes scale from tap water to ensure optimum
performance for your iron. For more information, go to
www.philips.com/ironcare.
Caution: Do not use perfumed water, water from a tumble dryer,
rainwater,vinegar,mineralwater,magneticallytreatedwater(Aqua+),
waterfromadrinkingwaterlter,starch,descalingagents,ironing
aids,saltorchemicalsinthewatertank.Thesetypesofwaterhave
beentested.Theyarenotsuitableandmayevencausedamagetothe
appliance. If you use any of these types of water, your guarantee becomes
invalid.
1 Openthellingfunnellid.
2 Fill the water tank with tap water up to the MAX indication.Then
closellingfunnellid(‘click’).
ENGLISH8
Using the appliance
OptimalTemp technology
Do not iron non-ironable fabrics.
This appliance is equipped with OptimalTemp technology, which enables
you to iron all types of ironable fabrics without adjusting the iron
temperature or steam setting.
- Fabrics with these symbols are ironable, for example linen, cotton,
polyester, silk, wool, viscose and rayon.
- Fabrics with this symbol are not ironable. These fabrics include synthetic
fabrics such as Spandex or elastane, Spandex-mixed fabrics and
polyolens (e.g. polypropylene), but also prints on garments.
Ironing
1 Placethesteamgeneratoronastableandevensurface.
2 Make sure that there is enough water in the water tank (see section
‘Fillingthewatertank’inchapter‘Preparingforuse’).
3 Plug in the appliance and press the on/off button.Wait for approx. 2
minutesuntilthe‘ironready’lightstopsashing.
4 Press and hold the steam trigger to start ironing. Keep the steam
triggerpressedcontinuouslywhenyoumovetheironoverthefabric.
Note: When you use the appliance for the rst time or after replacement of
the ANTI-CALC cartridge, it may take 10 seconds for steam to come out of the
appliance.
Note:The pump is activated each time you press the steam trigger. It produces
subtle rattling sound, which is normal.When there is no water in the water
tank, the pump sound is louder. Fill up the water tank with water when the
water level drops below the minimum level.
ENGLISH 9
Steam boost function
- Use the steam boost function to remove stubborn creases. Press the
steam trigger twice quickly.
Vertical steam ironing
Hotsteamisemittedfromtheiron.Neverattempttoremovecreases
from a garment that someone is wearing. Do not apply steam near your
orsomeoneelse’shand.
You can use the steam iron in vertical position to remove wrinkles from
hanging fabrics.
1 Holdtheironinverticalposition,pressthesteamtriggerandtouch
the garment lightly with the soleplate.
Putting down the iron during ironing
- During ironing, you can place the iron either on the iron platform
or horizontally on the ironing board. Thanks to the OptimalTemp
technology, the soleplate will not damage the ironing board cover.
Energy saving
ECO mode
By using the ECO mode (reduced amount of steam), you can save energy
without compromising on the ironing result.
1 ToactivatetheECOmode,presstheECObutton.Thelightinthe
ECObuttongoeson.
2 Toswitchbacktothe‘OptimalTemp’setting,presstheECObutton
again.
For the shortest ironing time, we advise you to use the ‘OptimalTemp’
setting.
Safety auto-off (specic types only)
The safety auto-off function automatically switches off the appliance if it has
not been used for 5 minutes, to save energy.
ENGLISH10
Andere Handbücher für GC7600 series
11
Inhaltsverzeichnis
Sprachen:
Andere Philips Eisen Handbücher
Philips
Philips PerfectCare Pure PSG GC7630 Bedienungsanleitung
Philips
Philips GC5034/20 Bedienungsanleitung
Philips
Philips GC6600 series Bedienungsanleitung
Philips
Philips PerfectCare Elite GC9600 Series Bedienungsanleitung
Philips
Philips Azur GC4340 Bedienungsanleitung
Philips
Philips PSG7028 Bedienungsanleitung
Philips
Philips GC6010/03 Bedienungsanleitung
Philips
Philips COMFORT GC1121 Bedienungsanleitung
Philips
Philips GC7600 series Bedienungsanleitung
Philips
Philips GC7900 Series Bedienungsanleitung
Philips
Philips GC3600 Series Bedienungsanleitung
Philips
Philips PerfectCare Pure GC7636/30 Bedienungsanleitung
Philips
Philips Azure Cordless HI575 Bedienungsanleitung
Philips
Philips Provapor GC6065 Bedienungsanleitung
Philips
Philips PerfectCare Compact Plus Bedienungsanleitung
Philips
Philips EasySpeed GC1020 series Bedienungsanleitung
Philips
Philips GC9080/06 Bedienungsanleitung
Philips
Philips Azur Cordless HI575 Bedienungsanleitung
Philips
Philips PowerLife GC2510 Bedienungsanleitung
Philips
Philips GC4500 series Bedienungsanleitung
